2013 Fiesta ST2 project
Right, picked up my new car a couple of weeks ago, so thought I'd get a project thread on the go.
I know these are a love/hate sort of thing, but I'm a huge fan. It's massively fun to drive and goes very well for what it is. The spec is: - ST2 - Molten Orange pearlescent paint - Smoke Storm interior - ST style pack (red calipers, Rado Grey alloys and illuminated ST scuff plates) - EATC (climate control) - Sony Navigation system with DAB and Sync - Spare wheel Plans are as follows: - HID conversion - DONE - LED number plate bulbs - DONE - Blue tinted/Silvatec indicator bulbs - DONE - Paint front lower grilles/diffuser gloss black - FiestaSTOC stickers (internal to keep them subtle) - DONE - K&N filter - REVO Stg1 map - New wheels (unsure what yet) - Climair wind deflectors - DONE - Eibachs - Remove dealer stickers - DONE - Plain registration plates to replace dealer plates - DONE That's all I have planned for the minute, I'm sure that list will increase soon though! And on to the pictures.. https://farm9.staticflickr.com/8414/...965b93e8_b.jpg https://farm9.staticflickr.com/8119/...3d9cc5bf_b.jpg https://farm9.staticflickr.com/8259/...abcb22df_b.jpg https://farm9.staticflickr.com/8420/...1ae20c04_b.jpg https://i66.photobucket.com/albums/h...ps4a8cd077.jpg https://i66.photobucket.com/albums/h...psedcdb100.jpg https://i66.photobucket.com/albums/h...ps97dc6191.jpg Thanks for looking Josh |
Awesome looking car very jealous :grin:
|
That looks yummy :grin:
|
Cheers :D
|
Dead jealous like that is one stunning Fiesta ST.
|
Cheers mate
|
very nice mate, love the colour.
whats your plans for it. |
Love these, not keen on the wheels so can only get better when you change them
|
Lovely colour!!
|
A couple of new additions and pics
- Gloss black lower grilles - Black headlights - Auto Specialists induction kit - Airtec intercooler http://www.flickr.com/photos/joshknellerphotography/9213219751/http://www.flickr.com/photos/joshknellerphotography/9213219751/ by Josh Kneller Photography, on Flickr http://www.flickr.com/photos/joshknellerphotography/9213853079/http://www.flickr.com/photos/joshknellerphotography/9213853079/ by Josh Kneller Photography, on Flickr http://www.flickr.com/photos/joshknellerphotography/9213854685/http://www.flickr.com/photos/joshknellerphotography/9213854685/ by Josh Kneller Photography, on Flickr http://www.flickr.com/photos/joshknellerphotography/9213855859/http://www.flickr.com/photos/joshknellerphotography/9213855859/ by Josh Kneller Photography, on Flickr http://www.flickr.com/photos/joshknellerphotography/9213857479/http://www.flickr.com/photos/joshknellerphotography/9213857479/ by Josh Kneller Photography, on Flickr http://www.flickr.com/photos/joshknellerphotography/9213871201/http://www.flickr.com/photos/joshknellerphotography/9213871201/ by Josh Kneller Photography, on Flickr http://www.flickr.com/photos/joshknellerphotography/9216647242/http://www.flickr.com/photos/joshknellerphotography/9216647242/ by Josh Kneller Photography, on Flickr |
Purchased a pair of mk1 Focus RS Brembo calipers, 324mm discs and Mintex pads today. Should be picking them up next week :D
|
Nice looking thing that matie.
|
Very nice mate :cool::cool::cool:
Brian |
Very cool matey.Fook the warranty get the mods done lol.
|
Booked in to have the Mountune MP215 package fitted on the 1st August. 215bhp and 320Nm. Should go quite nicely :D
|
Right, a couple of little updates for you.
Had the car RR'd a couple of weeks back. Put it back to completely standard, so that I'd have a base figure to work from. Factory figures are: 197bhp (200ps) and 290Nm (214lbft). My results: 204.6bhp (207ps) and 284Nm (209.7lbft). https://farm6.staticflickr.com/5504/...88cbcd4c_c.jpg Up on power, but slightly down on torque. It was a hot day though, so I reckon it would make the peak torque figure on a slightly cooler day. I then took the car to Mountune HQ in Hutton, Essex to have the MP215 package fitted. This consists of a revised lower airbox with a secondary cold air feed, a K&N panel filter and a revised map. This gives a book figure of 212bhp (215ps) and 320Nm (236lbft). I'm yet to have it dyno'd again, but when I do, I'll update on new power/torque figures. https://farm8.staticflickr.com/7346/...dc2562ab_c.jpg https://farm4.staticflickr.com/3758/...5bbc7324_c.jpg https://farm8.staticflickr.com/7446/...0beb50b7_c.jpg https://farm8.staticflickr.com/7440/...d25d0074_c.jpg The car now has the Airtec intercooler fitted back on, and is currently with BoostJunky (www.boostjunky.co.uk) for a full custom turbo-back exhaust. He will then be designing and building me a custom intercooler to replace the Airtec, but that won't be until after Ford Fair. https://farm6.staticflickr.com/5501/...3b070998_c.jpg https://farm6.staticflickr.com/5533/...618e0564_c.jpg That's it pretty much up date until now, but I'll update once I have the car back from having the exhaust made (tomorrow) |
It's getting some toys isn't it. Just been talking to Rich (boostjunky) he reckons the exhaust will be done today. I wonder if it will sound similar??!
|
Certainly is :D
That'd be good if it is done today, I'm buzzing to pick it up! Looking at the system he's done for the mk2 RS, it looks VERY impressive! |
nicely done mate, great colourand nice toy you have put on it.. keep the updates comming
|
All times are GMT. The time now is 10:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands