spaceframe mondeo track car
#1
Virgin
Thread Starter
Join Date: Feb 2012
Location: kesh
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
spaceframe mondeo track car
been lurking around the forum for a long time and finily decided to join up and thought i would share my new project, purchaced it a few days ago and im expecting to have it home tomorrow
it has a fully spaceframed chassis and full fiberglass body as fars as i no its an ex v6 eurocar
all breaks and suspension are there & rear axel,
plans are some form of v8 engine & gearbox engine and repaint everything then abuse it
cheers for looking
nomis
it has a fully spaceframed chassis and full fiberglass body as fars as i no its an ex v6 eurocar
all breaks and suspension are there & rear axel,
plans are some form of v8 engine & gearbox engine and repaint everything then abuse it
cheers for looking
nomis
#2
10K+ Poster!!
Strangely I was only talking to someone a few days ago that has Barry Sheen ( I think thats how its spelt ) old Mondeo.
I believe they were built by Sonny Howard ( SHP Motorsport ) who built my Peugeot.
Cool project, could have lots of potential I'm sure.
I believe they were built by Sonny Howard ( SHP Motorsport ) who built my Peugeot.
Cool project, could have lots of potential I'm sure.
#5
big floppy donkey dick
Join Date: May 2003
Location: Rouse Sport heaven ;)
Posts: 4,514
Likes: 0
Received 3 Likes
on
3 Posts
is that an old "Euro car" oval racer?
cool find!
***Edit***
found this, sounds like it is!
http://www.bmrc.co.uk/eurocars/
cool find!
***Edit***
found this, sounds like it is!
http://www.bmrc.co.uk/eurocars/
Last edited by Cossie Sean; 21-02-2012 at 09:52 PM.
Trending Topics
#12
I've found that life I needed.. It's HERE!!
my aunts ex husbands brother used to race one of these when they were new and they said it cost 70k (not sure how true this is) to build a new one after he wrote it off lol
#13
Lucifer II - 666
Lots of potential! Hope you do it well as could make a great car.
#17
Heres the link to explain all. The guy i use to race against in Hot rods (Ricky Hunn) use to race one years back. As later did his son Jason Hunn.
http://www.google.co.uk/imgres?imgur...%3Divns&itbs=1
http://www.google.co.uk/imgres?imgur...%3Divns&itbs=1
Last edited by nickc107; 08-03-2012 at 12:36 PM. Reason: edit
#18
Barry lee euro car up for sale at the mo if anyone fancys a project?
http://www.shortcircuitmag.info/?page_id=7188&id=89
http://www.shortcircuitmag.info/?page_id=7188&id=89
#19
McGarrity Motorsport
Barry lee euro car up for sale at the mo if anyone fancys a project?
http://www.shortcircuitmag.info/?page_id=7188&id=89
http://www.shortcircuitmag.info/?page_id=7188&id=89
#23
McGarrity Motorsport
#24
Virgin
Thread Starter
Join Date: Feb 2012
Location: kesh
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
#28
Virgin
Thread Starter
Join Date: Feb 2012
Location: kesh
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
after finally getting some good weather i got a little bit done i got the whole front end off to check out the suspention and breaks im quite happy with everything all is working and free and nothing is bent or broke
pannels all come off quite easily too
little stack of parts
pannels all come off quite easily too
little stack of parts
#31
Irregular Poster
#35
Advanced PassionFord User
Looks a fun project! I don't in any way want to bring a downer to it, but please do yourself a favour and get some new front wishbones made up. The problem is in this pic:
The entire weight of this corner of the car is being resisted only by the shank on the rosejoint in bending, a mode in which it was never intended to operate. By the looks of things its already bent.
Either move the bottom of the shock to act directly on the upright, or if thats not possible due to tyre clearance at least replace the joint with a proper housed sperical like this:
The entire weight of this corner of the car is being resisted only by the shank on the rosejoint in bending, a mode in which it was never intended to operate. By the looks of things its already bent.
Either move the bottom of the shock to act directly on the upright, or if thats not possible due to tyre clearance at least replace the joint with a proper housed sperical like this:
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
04-01-2024 02:36 PM
saph in dorset
General Car Related Discussion.
0
14-08-2015 10:10 AM
RIB1122
Ford RS Cosworth Parts for Sale
1
13-08-2015 09:09 PM
track.focus'd
Restorations, Rebuilds & Projects.
26
12-08-2015 05:53 PM