Time Attack ST170 - Few new pics 24/06
#521
Borg Warner EFR Equipped!
Thread Starter
Join Date: Apr 2005
Location: In the unit, building a 450bhp Time Attack Focus!
Posts: 5,810
Likes: 0
Received 2 Likes
on
2 Posts
Wheels are a funny one I admit. I bought them when the car was just going to be a fast road car with standard bodywork. Since the transition into race car, I have wondered about a change...
Maybe they'll become my rims for wets in due course
Maybe they'll become my rims for wets in due course
#524
BANNED
BANNED
Join Date: Jan 2005
Location: North Wales....Congleton now though!
Posts: 9,757
Likes: 0
Received 1 Like
on
1 Post
Aye Jim, I've just scrapped an old EasyJet plane so he can take bits from
@ Will
Leave the wheels as they are, the fact you started this car with the intention of doing something that hasn't really been done to such a level was your goal a good while back, the wheels just add to that marmite feel that some may not agree with. F*ck 'em
@ Will
Leave the wheels as they are, the fact you started this car with the intention of doing something that hasn't really been done to such a level was your goal a good while back, the wheels just add to that marmite feel that some may not agree with. F*ck 'em
Last edited by COCHYN; 28-06-2012 at 07:48 PM.
#531
10K+ Poster!!
Fair play it looks awsome!
#532
Borg Warner EFR Equipped!
Thread Starter
Join Date: Apr 2005
Location: In the unit, building a 450bhp Time Attack Focus!
Posts: 5,810
Likes: 0
Received 2 Likes
on
2 Posts
Cheers guys - really pleased with the feature!
Ade has done a cracking job with the photos - even if it was his most stressful ever shoot!
Neil and the Fast Ford boys have done a great job putting it all together
Ade has done a cracking job with the photos - even if it was his most stressful ever shoot!
Neil and the Fast Ford boys have done a great job putting it all together
#533
Hi Will,
Where did you get your upper grille from mate? It is the exact one i have wanted for a while, there is a number of debadged grilles on the market but looking at numerous pictures of it on your car with the bonnet open and shut, it is the one i really want to buy, could you direct me towards where it came from please!?
Where did you get your upper grille from mate? It is the exact one i have wanted for a while, there is a number of debadged grilles on the market but looking at numerous pictures of it on your car with the bonnet open and shut, it is the one i really want to buy, could you direct me towards where it came from please!?
#534
Borg Warner EFR Equipped!
Thread Starter
Join Date: Apr 2005
Location: In the unit, building a 450bhp Time Attack Focus!
Posts: 5,810
Likes: 0
Received 2 Likes
on
2 Posts
Hi Will,
Where did you get your upper grille from mate? It is the exact one i have wanted for a while, there is a number of debadged grilles on the market but looking at numerous pictures of it on your car with the bonnet open and shut, it is the one i really want to buy, could you direct me towards where it came from please!?
Where did you get your upper grille from mate? It is the exact one i have wanted for a while, there is a number of debadged grilles on the market but looking at numerous pictures of it on your car with the bonnet open and shut, it is the one i really want to buy, could you direct me towards where it came from please!?
#536
Is there anywhere on here where you said which aerocatch design you went for? And did you need to add anything to secure them where you have in the engine bay? Or was it direct fit, as that position looks awesome!
I want to get some and not sure whether you went for 'flush' or 'push flush' ?
Thanks again.
I want to get some and not sure whether you went for 'flush' or 'push flush' ?
Thanks again.
#538
I'm Finding My Feet Here Now
Join Date: Jan 2008
Location: Vejle - Denmark
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Hi there :-)...
Just been through the whole thread. Amazing project I must say!!!... I want a toy like that too! :-D.
I was wondering where you purchase the black braided steel hoses you use in your fuelpump setup?
I am building a "stealth" enginebay in my S2, and want to use black fittings and hoses all over the bay .
Check out my projeckt here: https://passionford.com/forum/restor...done-pics.html
Best regards - Kasper - Denmark
I was wondering where you purchase the black braided steel hoses you use in your fuelpump setup?
I am building a "stealth" enginebay in my S2, and want to use black fittings and hoses all over the bay .
Check out my projeckt here: https://passionford.com/forum/restor...done-pics.html
Best regards - Kasper - Denmark
#539
Borg Warner EFR Equipped!
Thread Starter
Join Date: Apr 2005
Location: In the unit, building a 450bhp Time Attack Focus!
Posts: 5,810
Likes: 0
Received 2 Likes
on
2 Posts
Kasper - PM on its way to you!
svt-focus - I've just had a look on ebay and there aren't any listed I'll have a dig through my receipts and see if I can find out who supplied it. I think it was a company called 'JapParts' from Lancaster, rings a bell as I found it amusing they were selling Ford stuff
The aerocatches are 'plus flush' ones, its just a case of positioning them where you can secure the pins - where I've put mine is tricky as the front panel is honeycomb construction!
svt-focus - I've just had a look on ebay and there aren't any listed I'll have a dig through my receipts and see if I can find out who supplied it. I think it was a company called 'JapParts' from Lancaster, rings a bell as I found it amusing they were selling Ford stuff
The aerocatches are 'plus flush' ones, its just a case of positioning them where you can secure the pins - where I've put mine is tricky as the front panel is honeycomb construction!
#542
Too many posts.. I need a life!!
Can you tell me what thread size/ adaptor you used on the power steering pump high pressure pipe? I can see your using -an fitting on the hose itself and want to do the same on my fiesta. Cheers
#543
Advanced PassionFord User
What a read
Thank you..
Thank you..
#545
willpedleyracing.co.uk
No Carlo,
Not yet Taking the business forward with premises, new equipment etc. has swallowed up all my time and money for the last 9 months really.
Plus, i'm still trying to get rid of some gremlins in the H bridge (drive by wire). The throttle pedal is working and calibrated, the ECU is giving an output demand but the throttle body isn't reacting. Try the throttle body on a different car and it works fine, ECU has been away for inspection and upgrade and apparently bench tests ok. Very strange
If I ever get chance, i'd like to try and get things sorted and maybe do Oulton Park Time Attack this year. However, i've got a customers running and they do take priority!
I'll put some of the pics up from the photoshoot at some point too
Not yet Taking the business forward with premises, new equipment etc. has swallowed up all my time and money for the last 9 months really.
Plus, i'm still trying to get rid of some gremlins in the H bridge (drive by wire). The throttle pedal is working and calibrated, the ECU is giving an output demand but the throttle body isn't reacting. Try the throttle body on a different car and it works fine, ECU has been away for inspection and upgrade and apparently bench tests ok. Very strange
If I ever get chance, i'd like to try and get things sorted and maybe do Oulton Park Time Attack this year. However, i've got a customers running and they do take priority!
I'll put some of the pics up from the photoshoot at some point too
#547
willpedleyracing.co.uk
Yes, the Mini is doing a number of rounds as a One Hit Wonder - unfortunately work commitments mean that he can't do the full calendar. There's also another car that i'm getting more and more involved with so suspect i'll be kept busy at all the TA events between the two of them
#549
willpedleyracing.co.uk
Thread
Thread Starter
Forum
Replies
Last Post
track.focus'd
Restorations, Rebuilds & Projects.
26
12-08-2015 05:53 PM