Fiesta mk1 project rear wheel drive
Hey everyone!! MY PROJECT IS A FIESTA MK1!! It's about time i put my pics on here and start getting everything I need to make some progress! But first I'll show you what I have!! http://i750.photobucket.com/albums/x...s/DSCN0216.jpg In this Pic I have taken off a stainless steel plate that weighed loads!!!!!!!! http://i750.photobucket.com/albums/x...s/DSCN0230.jpg http://i750.photobucket.com/albums/x...s/DSCN0214.jpg http://i750.photobucket.com/albums/x...h_DSCN0218.jpg http://i750.photobucket.com/albums/x...s/DSCN0219.jpg http://i750.photobucket.com/albums/x...s/DSCN0229.jpg The only problem with the car is that a previous owner had under steered into a curb and as you can see it's twisted!!:roll: http://i750.photobucket.com/albums/x...s/DSCN0222.jpg http://i750.photobucket.com/albums/x...s/DSCN0223.jpg When i first got the car a started tracing some of the wires and managed to find a 12volt reversing alarm! WTF!!! who needs a reversing alarm in a car that small!!! Couldn't stop laughing when i found it! http://i750.photobucket.com/albums/x...s/DSCN0225.jpg Now for the Engine that I'm using!!! http://i750.photobucket.com/albums/x...s/DSCN0240.jpg http://i750.photobucket.com/albums/x...s/DSCN0245.jpg CA18 DET FROM A 200SX, AND I HAVE ALREADY GOT A GARRETT T28 TURBO FOR IT! http://i750.photobucket.com/albums/x...s/DSCN0243.jpg http://i750.photobucket.com/albums/x...s/DSCN0242.jpg I HAVE ALSO GOT 2 CORBEAU ADJUSTABLE BUCKET SEATS WHICH ARE BEING RE UPHOLSTERED WITH BLACK FABRIC AND SILVER STITCHING!! http://i750.photobucket.com/albums/x...s/DSCN0248.jpg SO THAT'S ALL FOR NOW, BUT I DO NEED SOME PARTS SO IF ANYONE HAS ANY OF THESE FOR SALE PLEASE LET ME KNOW!!! 1. FORD ESCORT MK2 REAR AXLE! 2. FIESTA SUPERSPORT BUMPERS 3. SUPERSPORT WHEELS |
Top project matey.I will keep an eye on it.
|
cool project mate.
pmsl at the reversing beeper hope your engine is ok after it says "said is good but unsure":cry: |
yeah the engine should be good! am sending it to get acid dipped before i rebuild with all new piston rings bearings etc.. i really want to mock fit it to a rear axle so i can make sure it all fits then i can send it off with some other bits that i need doing, i have got some more bits taht i need to take pictures of.
|
looks interesting, nice solid base too!
|
Very interesting project
keep my eye on this :-) |
i like it !
i fancy making my rotten one a 4wd with an sr20det :top: will have to fabricate a whole new floor lol |
you'll have a big job if ya take that on m8!!! good luck if ya do it!!!
|
Originally Posted by r0ckst34dy
(Post 5612697)
you'll have a big job if ya take that on m8!!! good luck if ya do it!!!
|
sounds like the place to do it if your gonna!!:lol:
|
good project
|
Originally Posted by r0ckst34dy
(Post 5614902)
sounds like the place to do it if your gonna!!:lol:
|
Top project mate
|
Originally Posted by PileOfRust
(Post 5615374)
i know lmao havent got the money for storage, and ill be working on it alot of the time during free periods if i can :D
|
Is that a CA18DET!??
Friend of mine just built an AE86 Corolla Twincam with an SR20DET (non VVC type) |
Originally Posted by Maxwell
(Post 5639080)
Is that a CA18DET!??
Friend of mine just built an AE86 Corolla Twincam with an SR20DET (non VVC type) Wt power is it running! |
All times are GMT. The time now is 08:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands