Originally Posted by gjh
(Post 6700122)
Stunning car with you, you need to get a vid up of the anti lag working.
|
3 Attachment(s)
So the new iscv has come and just had a go at modifying it for the antilag & launch control but not sure its right, opened up the 2 existing hole to 9mm and drilled 2 more at 8mm. But the plunger inside doesn't cover the holes fully is this right ?
Don't want to put it back on if its not right, has anyone done this mod themselves help appreciated Attachment 14703 Attachment 14704 Attachment 14705 |
2 Attachment(s)
Got another iscv and just redrilled all the holes took a bit more care this time seems to have done the trick
Attachment 14624 Attachment 14625 |
3 Attachment(s)
Got a breather tank to add to the system needs a good polish up but looks good, now just need to sort all the pipes out and mount it up
Attachment 12515 Attachment 12516 Attachment 12517 |
7 Attachment(s)
Taken all the interior out of the car while its away so set about the cleaning of all the interior parts, started with the carpet
Attachment 11169 Few bad marks but hasn't come out too bad Attachment 11170 Then the boot side carpets Left ones cleaned right one as was Attachment 11171 And the grab handles left one cleaned right one as was Attachment 11172 Sun visors and interior grab handles Attachment 11173 Attachment 11172 Attachment 11175 |
3 Attachment(s)
Had the RS500 splitter brackets plated while it was off and cleaned the splitter up
Bumpers gone to paintshop for a refresh Attachment 10817 Attachment 10818 Attachment 10819 |
All times are GMT. The time now is 07:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands