Dazrsturbo Series 2 89 Spec ERST Project ALL FINISHED AND NOW FOR SALE
#46
well just a small update here. I turned the car around on saturday 29/1/11.
it hasn't been out of the garage since august last year, anyway i turned it round and its now back in the garage ready for the n/s to be sorted and repaired, new sill and a pillar repairs are needed, and the rear outer arch needs a few bits replacing, here's a pic from when i pushed the old gal out into the daylight.
it hasn't been out of the garage since august last year, anyway i turned it round and its now back in the garage ready for the n/s to be sorted and repaired, new sill and a pillar repairs are needed, and the rear outer arch needs a few bits replacing, here's a pic from when i pushed the old gal out into the daylight.
#48
Too many posts.. I need a life!!
iTrader: (2)
Join Date: Jan 2010
Location: norfolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
well just a small update here. I turned the car around on saturday 29/1/11.
it hasn't been out of the garage since august last year, anyway i turned it round and its now back in the garage ready for the n/s to be sorted and repaired, new sill and a pillar repairs are needed, and the rear outer arch needs a few bits replacing, here's a pic from when i pushed the old gal out into the daylight.
it hasn't been out of the garage since august last year, anyway i turned it round and its now back in the garage ready for the n/s to be sorted and repaired, new sill and a pillar repairs are needed, and the rear outer arch needs a few bits replacing, here's a pic from when i pushed the old gal out into the daylight.
#50
Feb 6th 2011
This weekend i made a start on the n/s sill. it didnt look too bad at first but after inspection with the wire wheel and removing a tub of filler i was left with a shit sill . it had been plated and bodged up at some point. after cutting it out i found the inner sill wasnt in the best shape too. Pics below are of the sill before and after cutting. im also working on repairing the inside floor/bulkhead area atm too so theres a few pics of that with this update. Got a coat of paint on the o/s inner wheel arch too.
This weekend i made a start on the n/s sill. it didnt look too bad at first but after inspection with the wire wheel and removing a tub of filler i was left with a shit sill . it had been plated and bodged up at some point. after cutting it out i found the inner sill wasnt in the best shape too. Pics below are of the sill before and after cutting. im also working on repairing the inside floor/bulkhead area atm too so theres a few pics of that with this update. Got a coat of paint on the o/s inner wheel arch too.
#54
PassionFord Regular
Join Date: Jun 2010
Location: Aberdeen
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
its really nice to see someone saving and old girl like this too many get scrapped! still where would you surce all the bits if they didnt! i have had my s2 for almost a year and havent seen one mk4 escort in the scraps near me at all in that time.
well done and keep it up!
well done and keep it up!
#55
20/2/11
Hello, been a while since i updated, iv been working on the passenger side inner and outer sill. it was pretty rottern but iv been busy repairing the inner sill and putting a new outer sill on too. i started to repair the rear wheel arch as well, it had a few rusty bits so they have now been sorted. pics below.
Just got the a piller and passenger floor to sort now, then its onto the rear of the car and underneath! Its comming along slowly!
Hello, been a while since i updated, iv been working on the passenger side inner and outer sill. it was pretty rottern but iv been busy repairing the inner sill and putting a new outer sill on too. i started to repair the rear wheel arch as well, it had a few rusty bits so they have now been sorted. pics below.
Just got the a piller and passenger floor to sort now, then its onto the rear of the car and underneath! Its comming along slowly!
#59
Too many posts.. I need a life!!
iTrader: (2)
Join Date: Jan 2010
Location: norfolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Im in a muddle at the moment as the cambelt kit still havent arived hence engine still in kitchen i need it done so i can put the engine in and find out how far the rad has to go forward and intercooler before the car gose's to my mate's for a respray the one good thing that happend this week was my cosworth 4 pot caliper's turned up i need to strip them paint them and get new piston's and seal's witch aint a prop.. but it do craze my arse that something as simple as a cambelt kit is holding me back lol.. but there's a few more pic's in my thread of what engine look's like now and a pic of the caliper's..
#66
5/4/11
wow first update in well over a month! been real busy with other stuff so the escort hasn't been seeing much attention.
i repaired the passenger a pillar and sill , as you will know from a few posts back it was a bit of a rotter! got a few other bits to do to finish the sill so pics of that will follow.The passenger floor has also been repaired and pics of that will follow too. got the inner front arch all primed and painted this weekend. pretty happy with how it came out. heres a few pics. Im back on track with the car now so more updates soon!
i repaired the passenger a pillar and sill , as you will know from a few posts back it was a bit of a rotter! got a few other bits to do to finish the sill so pics of that will follow.The passenger floor has also been repaired and pics of that will follow too. got the inner front arch all primed and painted this weekend. pretty happy with how it came out. heres a few pics. Im back on track with the car now so more updates soon!
#69
well iv finally finished the passenger side floor. im really happy with it! im not too fussed about the paint on the inside floor as the whole car is going to be sound deadened, as long as its got something to protect it im happy. heres a few before and after shots.
Before
After
Before
After
#71
25th April
i had the past week off to get some work done to the car, the bodywork is pretty much done now ready for the bodyshop to put in the finishing touches! heres some pics of how it stood in the week, update on the underside comming later today!
#74
Too many posts.. I need a life!!
iTrader: (2)
Join Date: Jan 2010
Location: norfolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Looking good mate she's getting there now Once she sprayed it will look like a new motor Iwill b updateing mine later as my in side is now coming along im out there now getting the dash in and wireing threaded through But ive made a big boo with the megasquirt as i bought the wrong one it's for MFI and not EFI So i have now got to sell it and buy the right one what a twat lol
#77
Underside Clean Up
well i finally got the underside of the car stripped and cleaned up, I first had the task of Repairing the spring mounts as there were hanging off the car!
I also got some new shackles from ford as mine were beyond useable.
All suspension parts are off the the powder coaters this week.
heres part 1 of the underside update.
I also got some new shackles from ford as mine were beyond useable.
All suspension parts are off the the powder coaters this week.
heres part 1 of the underside update.