cossiedevil

Thanks guys .Just got my hands on a genuine wrc rear spoiler today which i should have 2mara so well happy but also have a carbon one as well going to see which to useonder2:

cossiedevil

update to the stage im at car is off the roll over jig front panel fitted damage repaired.rear spoiler fitted and vents cut out the same as stian had in his.got bored and fitted the old doors and filed the door lock back into them for spares should i need them.my wings have just arrived back very happy and big thanks to mike rainbird for sorting these out for me just have to fit and smooth and im ready to spray.

Twins

iTrader: (18)

I take it your going for some fans in the back

cossiedevil

thinking off going that way looking at whats the best way to fit these and route the pipes.

bad boy rs

iTrader: (7)

top work cant belive ive only just seen this

eazy_ways

iTrader: (2)

Hi, out of interest who are the three suppliers for the front bumpers? I've ordered a carbon rear item but need to order a front one.

cossiedevil

1 was from poland an ebay seller will get the link.
2 is from bob roberts motorsport.
3 is from ramsport.

The one in the pic is from poland and by far the the best made but not the best look the other two needed alot of work but 2 needed the most doing be4 i could put primer on them.

Graceland

Nice to see my old number plate still on a Cossie of some description

cossiedevil

Up late last night and early this morning to finish this getting the gaps all right on the wings due to the wrc roll put in the wings driver side done just have to finish the passenger but very happy got them welded up pretty good as the need very little filling as i seam welded up the cut nice to see it starting to look like a wrc car.

NEIL A

iTrader: (6)

Cant wait to see how it looks with the WRC parts, the car was going to go WRC style years ago . I went as far as to buy the wings,tailgate/spoiler and looked into bumpers then gave up on the idea.

james kiely

iTrader: (5)

great job cossie devil

The DIVA

iTrader: (3)

I love your attention to detail, it`s effort like this that makes the difference between a good car and a great car

whizzisat114

iTrader: (2)

love the wing's Were they sectioned or rolled?

cossiedevil

They where rolled

cossiedevil

Thanks for all the comments.
Got the wings finished with the welding test fitted the bumpers and all fit ok going to make up brackets to make it easy to change these over when sprayed.Few pics of the wings done and what it look like when i put them on before i cut them.

cossiedevil

I hope to do it justice in turning wrc style as the car was stunning the way it was when you had it Neil

cossiedevil

wings turned out to be quicker to do than thought finished them today with first coat of primer just have to sand and prime again to leave them flat without flaws.

Ginge !

looking good. attention to detail does make alot of difference !!!

cossiedevil

Test fit of the ramsport bumper and grill for the making of stainless steel brackets to mount the bumper.

fezzajsy

iTrader: (9)

awesome stuff

stevealien

iTrader: (1)

looks good mate.gonna be a cracker.keep up the good work

cossiedevil

Well guys being busy between work and other stuff going on so not much time to get to the cossie but i have it all primed up and nearly ready for paint just have to take the rs2k 4x4 cossie rep project out to get the cossie in to spray and dunno what to do with the rs2k break it or finish it...Anyway got my wrc mirrors and converting these to run the cossie electric mirror system i have one done and the other nearly finished.Got a pm from a lad selling a full plated bolt kit for an escos that he never finished so got this off him aswell.











The bolt kit.

carlo

iTrader: (4)

Looking good mate sorry if i have missed it somewhere are you caging the car?

JamesH

iTrader: (21)

Great work!

Minirotty

Looking great mate

cossiedevil

Thanks guys.

cossiedevil

Dunno if i am i wanted to put a full fia spec one in but between the department of transport and head office of traffic corps i cant get an answer to it been legal in a road car as i will be driving this on the road.

AGAR-COSWORTH

Those mirrors look good - i'm surprised you don't see them on many other EsCos's. Are they easily sourced?

fezzajsy

iTrader: (9)

good progress

cossiedevil

Got them off a guy on ebay recommended by a few guys on the escort rs cosworth site and by far the best i've ever had of anything in carbon or fibre glass

AGAR-COSWORTH

I can see why they are recommended - they look like the real Grp A items.

BAM_S2

iTrader: (1)

great project, are you going to be leaving the quater pannels original or extending them?

Cheers

Ben

cossiedevil

Im leaving the rear quaters original as i seen alot of wrc style cossie on forums who have not push the rear out.

daveyc09

isnt it rwd already ??????????????????????

escoskmv

perfection!!! wot more can i say. love the blue

cossiedevil

Thanks guys.
Got the rear spoiler finished off today as i cut the top piece so as to make it bolt on for if i want a top piece made in carbon fibre wont be doing this again in a hurry alot of work.

daveyc09

wish i had space to work like that mate.
im waiting for the rain to stop so i can get the beam out of my esc van, so i can get it lowered.
your attention to detail is a credit to you mate.
keep up the good work.
dave.

botters

iTrader: (2)

i would have thought they are perfectly road legal mate as wrc cars are road legal, they need to be for road driving between stages

nice work by the way

Kverna

iTrader: (1)

Good project

cossiedevil

Thanks guys front and rear end finished got my morettes friday and managed to get a few hours on it this evening to make adjustments to the bumpers to get a good fit and to my amazment the €100 front bumper from poland has the the best fit to the head lights in pic below the other 2 have an half inch gap in the grill side off where the headlight meets the bumper the same gap the was is stian version 1 escos.