(COLEYST200) focus to focos / skyline gear box
[/IMG]
[/IMG]
07-08-2011, 07:19 PM
#1485
once again
iTrader: (1)
Join Date: May 2010
Location: clacton on sea
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
cheers guys coleyst200 i got to jack it up during the week so will take pics and put them up for you to show whats been done,
the comps are 10x18 with et12, been up ford fair today and not 1 es cos run that size or offset lol
the comps are 10x18 with et12, been up ford fair today and not 1 es cos run that size or offset lol
13-08-2011, 07:42 PM
#1487
Me and Rex had a small play today on the car .We have put the motor back in to do some more working out
The mane am was to try to get the front end some were close to set up / steering and its all starting to look good at last the rack has now got 2 spacers in it which are about 12mm they are there to limit the steering
All the front shafts are now all so fitted for the mo they are XR4X4 shafts but iv moded them so they work on my car
The mane am was to try to get the front end some were close to set up / steering and its all starting to look good at last the rack has now got 2 spacers in it which are about 12mm they are there to limit the steering
All the front shafts are now all so fitted for the mo they are XR4X4 shafts but iv moded them so they work on my car
look good them Ian
13-08-2011, 10:30 PM
#1492
Too many posts.. I need a life!!
Join Date: May 2004
Location: UK
Posts: 964
Likes: 0
Received 0 Likes
on
0 Posts
14-08-2011, 09:14 AM
#1495
I will mate when you give me a size as the 2wd rack is different to the 4x4 rack wot you have to do is get the front end all togever set the rack to center then get the wheels looking about right by doing the track rod ends then turn the steering till the wheel is just about to hits the chassis and then remesher the rack and that will give you the size spacer you need all so the you need to have the car ride hight set so when you take the sizes its like the car is on the floor not in the air . so when you need them JA/ANDY/DAVE just let me no
16-10-2011, 06:59 PM
#1504
Its been some time now as iv been on holiday / working you wot its like any way iv started doing some small jobs and as all ways getting parts togever for the bild
The head that iv got has 4 bent valves in it as the cam snaped so last week i sent off for the new ones from GGR
I all so won these off EBAY
And all so this tool set to make it a lot simpler to do valve seals
Iv now started working on getting the front bumper nice and strong theres still a long way to go with it but its a start
And iv all so started on the repairs to the rear wing
The head that iv got has 4 bent valves in it as the cam snaped so last week i sent off for the new ones from GGR
I all so won these off EBAY
And all so this tool set to make it a lot simpler to do valve seals
Iv now started working on getting the front bumper nice and strong theres still a long way to go with it but its a start
And iv all so started on the repairs to the rear wing
Last edited by COLEYST200; 16-10-2011 at 07:00 PM.
18-10-2011, 10:21 PM
#1513
Lucifer II - 666
Mounts look good mate.
19-10-2011, 06:10 PM
#1515
thanks mate i will try to get more done on it
Thanks Andy it is a Big bit of kit it will suit the car 100% there was a lot of cracks in it so iv filled it with exspanding foam
Thanks mate i love your van your doing iv put a 1.6 zetec in a van loved every min of doing it we did get a RS 2000 motor for but my mate sold it befor i had chance to get it in there
Hoping to get it done some time next year as you no mate its all down to ŁŁŁŁ
21-10-2011, 08:46 PM
#1520
Lucifer II - 666
Cheers bud, I know a few lads who've done the same and ended up getting rid lol
That's why it was handy getting the donar RS tbh, when it's finished I'll pop over in it have a nose at this if that's OK.