ben_zetecs mk6.5 zs project (pic heavy)
#1
15000
Thread Starter
Join Date: Apr 2009
Location: Milford Stafford
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
ben_zetecs mk6.5 zs project (pic heavy)
so here i go
mk6.5 fiesta zetec-s 1.6 moondust silver
parents payed for it bar 2k which i had got frm selling me other car
told i couldnt modifie it erm wronge thing to say :P
-------------------------------------------------------------
day i got it bog standard had done 9k wen brought it
next was private plate brought bye my parents
next on the list was noise lol i missed me exhaust note i had one the zr so access to tinternet i brought i piper cat back system :
so i played around with that on for i a while and saw that pumabuild did a manifold for it so i saved up the money and brought a 4-1piper manifold and sports cat
had it fitted with noticeable difference (had bad ecperince with pb crap customer service etc)
next on the list was a set off lowering springs and k&n fitler brough frm pumaspeed
so i opted for K&N 57i induction kit
kit Weitec F-sereies spring kit
before
after
then i got bored with the standard ford stereo so put that came and a kenwood DPX-303 Double Din cd mp3 wma player
before
after
then i was offered a bonnet bra 2nd hand so couldnt refuse cost £20 lol
so rolled with that for few weeks and the grey plastic looked cack grey so spraying seesion was needed
before
undercoat
1st coat off gloss black
2nd coat off gloss black
4x coats of laquere
grill
lower grill
lower grill surrond in primer and me lol
front with out grill
have none pics off the sides stripes or rear bits as funn decide to formate mem card
finished result
soa after a few months i was toyin with what to do next black wheels or cossie rims
black wheels it was cossie rim came in at to much
before
after
what it looked like after all black detailing and wheels where done
then progress stopped with the death off my nan and lack off funds until i found out me nan had left 1k to do what i like with so off i went with access to internet.
coilover where then borugh to finish the look
ap coliovers budget end off market but do the job from pumaspeed agen
60mm drop all round and rear adjuster removed
came on the tuesday fitted bye the wednesday
then i got bored agen so brought a little numba plate 12x3 for front lol
then came the rr day at hi-tech
which reulsted in a poorly fiesta came in at 114bhp wasnt happy boy but was told it was seriously under fueling which lost me 18bhp.
so i that day i booked it in there and then with courntey and mr tubizeee to be setup and yeah they did an ace job
friday came met jon and courtney there went off for food and came back to a fiesta that was fixed and was running 131bhp at the wheels with 125 or less off torque spike at 128bhp
then last sunday i went to pick my new addition thanks to seeing on here for sale
a carbon bonnet from charged st (ryan) £275 bargin
before
after
more updates very soon it slow progress due to money
TO DO LIST :
remove rear seats
soruce rear strut brace
source sapph cossie front seats
harness
new front bumper and smooth arond number plate
get two dents in sill repaired (joys of coilovers )
black plastics re done buy professional insted off me rattle can jobies lol
new wheels centres balck and chrome (instead of blue )
grooved disc and new pads not sure weather to go size up
few more engine mods in talks with hi-tech as courtney nos
and finally enjoy the fecking thing lol
cheers
ben
mk6.5 fiesta zetec-s 1.6 moondust silver
parents payed for it bar 2k which i had got frm selling me other car
told i couldnt modifie it erm wronge thing to say :P
-------------------------------------------------------------
day i got it bog standard had done 9k wen brought it
next was private plate brought bye my parents
next on the list was noise lol i missed me exhaust note i had one the zr so access to tinternet i brought i piper cat back system :
so i played around with that on for i a while and saw that pumabuild did a manifold for it so i saved up the money and brought a 4-1piper manifold and sports cat
had it fitted with noticeable difference (had bad ecperince with pb crap customer service etc)
next on the list was a set off lowering springs and k&n fitler brough frm pumaspeed
so i opted for K&N 57i induction kit
kit Weitec F-sereies spring kit
before
after
then i got bored with the standard ford stereo so put that came and a kenwood DPX-303 Double Din cd mp3 wma player
before
after
then i was offered a bonnet bra 2nd hand so couldnt refuse cost £20 lol
so rolled with that for few weeks and the grey plastic looked cack grey so spraying seesion was needed
before
undercoat
1st coat off gloss black
2nd coat off gloss black
4x coats of laquere
grill
lower grill
lower grill surrond in primer and me lol
front with out grill
have none pics off the sides stripes or rear bits as funn decide to formate mem card
finished result
soa after a few months i was toyin with what to do next black wheels or cossie rims
black wheels it was cossie rim came in at to much
before
after
what it looked like after all black detailing and wheels where done
then progress stopped with the death off my nan and lack off funds until i found out me nan had left 1k to do what i like with so off i went with access to internet.
coilover where then borugh to finish the look
ap coliovers budget end off market but do the job from pumaspeed agen
60mm drop all round and rear adjuster removed
came on the tuesday fitted bye the wednesday
then i got bored agen so brought a little numba plate 12x3 for front lol
then came the rr day at hi-tech
which reulsted in a poorly fiesta came in at 114bhp wasnt happy boy but was told it was seriously under fueling which lost me 18bhp.
so i that day i booked it in there and then with courntey and mr tubizeee to be setup and yeah they did an ace job
friday came met jon and courtney there went off for food and came back to a fiesta that was fixed and was running 131bhp at the wheels with 125 or less off torque spike at 128bhp
then last sunday i went to pick my new addition thanks to seeing on here for sale
a carbon bonnet from charged st (ryan) £275 bargin
before
after
more updates very soon it slow progress due to money
TO DO LIST :
remove rear seats
soruce rear strut brace
source sapph cossie front seats
harness
new front bumper and smooth arond number plate
get two dents in sill repaired (joys of coilovers )
black plastics re done buy professional insted off me rattle can jobies lol
new wheels centres balck and chrome (instead of blue )
grooved disc and new pads not sure weather to go size up
few more engine mods in talks with hi-tech as courtney nos
and finally enjoy the fecking thing lol
cheers
ben
Trending Topics
#9
Mk6 Fiesta ZS 1.6 Tractor
Join Date: Apr 2009
Location: Co. Durham
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
U have pretty much done what I was planning u bugger!! LOL! Very nice!! Check my project page! Named "fiesta mk6 zs tractor (tight
Budget project)"
I'm only just starting my mods tho!
Budget project)"
I'm only just starting my mods tho!
#10
15000
Thread Starter
Join Date: Apr 2009
Location: Milford Stafford
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
haha sorry mate and yeah all have a look and mines on a tighter budget atm the things have come to a stop till i renwe my insurance lol
#12
Too many posts.. I need a life!!
Join Date: May 2008
Location: England
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
Love the carbon bonnett.
I swear they are only 100bhp? Or are you getting fly figures?
I have one but I've never really looked into what they run lol
I swear they are only 100bhp? Or are you getting fly figures?
I have one but I've never really looked into what they run lol
#15
Advanced PassionFord User
The figure will be at the fly, Hi-Tec's rollers are notorious for over reading so its better to take there ATW figures as ATF!
Car loos really nice now, seen it about a couple of times
Car loos really nice now, seen it about a couple of times
#16
15000
Thread Starter
Join Date: Apr 2009
Location: Milford Stafford
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
god nos with reading i heard that about hi tech before but afta the set it up there is a noticeable difference lol
cheers for the comments everyone
next to do as the rear spacers and new disk and pads :O) roll on payday lol
cheers for the comments everyone
next to do as the rear spacers and new disk and pads :O) roll on payday lol
#28
Regular Contributor
Thread
Thread Starter
Forum
Replies
Last Post