my projects - 2.1 zvh ka - track ka - turbo'd mk4 cab
#1
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2004
Location: west midlands
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
my projects - 2.1 zvh ka - track ka - turbo'd mk4 cab
i keep forgetting to update these topics and they keep disappearing, will try to remember this time.
the silver zvh ka first....
inside all painted and all the door shut's etc cleaned up
old shell stripped
harness mountings poking through the carpet
300mm wilwoods, gaz coilovers, sport roll bar, and polybushed arms
interior in the back
plate for the pas pump to mount onto
battery box and swirl pot in the boot, standard pump put in the tank to feed the swirl pot then an external cossie pump to the front of the car
rear bumper on and suspension finished
brake lines done with a bias valve down the side of the drivers seat
oil breather mountings made and fixed
electric pas pump mounted and all pipes routed and connected
littlun decided to have a play in it too
the red shed....
still done fook all with it as i havent sorted the cage yet, got it rolling as i had to move it into another garage, but besides that it still looks very much the same, in bits lol
and as neither of those will be done for the summer i'v bought this to have a play about with, needs a lot of tidying up as its tatty as fook, having some panels put on the front, wings, front panel, battery tray, and scuttle oanel as they are a bit scrotty, then a 1900 tall block cvh i'v just bought, have just started on the bodywork for now, the pics make the bodywork look a lot better than it really is lol.
mint roof
full set of powdercoated and polybushed suspension parts to go on it
did some more on it today but havent taken any more pics yet.
the silver zvh ka first....
inside all painted and all the door shut's etc cleaned up
old shell stripped
harness mountings poking through the carpet
300mm wilwoods, gaz coilovers, sport roll bar, and polybushed arms
interior in the back
plate for the pas pump to mount onto
battery box and swirl pot in the boot, standard pump put in the tank to feed the swirl pot then an external cossie pump to the front of the car
rear bumper on and suspension finished
brake lines done with a bias valve down the side of the drivers seat
oil breather mountings made and fixed
electric pas pump mounted and all pipes routed and connected
littlun decided to have a play in it too
the red shed....
still done fook all with it as i havent sorted the cage yet, got it rolling as i had to move it into another garage, but besides that it still looks very much the same, in bits lol
and as neither of those will be done for the summer i'v bought this to have a play about with, needs a lot of tidying up as its tatty as fook, having some panels put on the front, wings, front panel, battery tray, and scuttle oanel as they are a bit scrotty, then a 1900 tall block cvh i'v just bought, have just started on the bodywork for now, the pics make the bodywork look a lot better than it really is lol.
mint roof
full set of powdercoated and polybushed suspension parts to go on it
did some more on it today but havent taken any more pics yet.
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
04-01-2024 02:36 PM
Matt Baxter
Ford RS Cosworth Parts for Sale
6
16-09-2015 08:30 PM
track.focus'd
Restorations, Rebuilds & Projects.
26
12-08-2015 05:53 PM