460+bhp 3door full restoration...Big update T4 and f88 ecu fitted
#121
Been busy making new doors for my garage,so progress has been slow on the 3dr.i did
some work tonight on the front under section.The usual damage where people have been jacking up the car on the wrong part of the body.Check out before and after.
some work tonight on the front under section.The usual damage where people have been jacking up the car on the wrong part of the body.Check out before and after.
Last edited by johnyjn; 05-01-2010 at 05:54 PM.
#122
Got time to finish the front sections tonight.Here are some pics of the bits after priming.And guess what its ready for PAINT!!
Went to Demon Tweeks on Saturday and went a bit crazy....
These are my new 3" harnesses by Sabelt and some corbeau pro seraes in grey bucket seats
Also got some California mirrors for the touring car look!
I have to wait a bit for the seats and the stack dash,non in stock.If you wondering the model is ST8110SR with the white face.Not cheap but better than buying a lots of gauges.
Went to Demon Tweeks on Saturday and went a bit crazy....
These are my new 3" harnesses by Sabelt and some corbeau pro seraes in grey bucket seats
Also got some California mirrors for the touring car look!
I have to wait a bit for the seats and the stack dash,non in stock.If you wondering the model is ST8110SR with the white face.Not cheap but better than buying a lots of gauges.
Last edited by johnyjn; 08-02-2009 at 02:53 AM.
#126
BANNED
BANNED
Join Date: Jan 2005
Location: North Wales....Congleton now though!
Posts: 9,757
Likes: 0
Received 1 Like
on
1 Post
Awsome John! The difference between the first pic and after a lot of work is amazing, doesn't look like some dumb ass jacked it in the wrong place! Quality!
Sorry I missed your call, was busy TIG'ing a new toy
Sorry I missed your call, was busy TIG'ing a new toy
Last edited by COCHYN; 16-12-2008 at 04:57 PM.
#128
BANNED
BANNED
Join Date: Jan 2005
Location: North Wales....Congleton now though!
Posts: 9,757
Likes: 0
Received 1 Like
on
1 Post
Fixing the other half's special toy innit.......
Nah, working hard on the new manifold, almost ready to get it ported. Should be a nice little example, all for Ł30 quid stainless materials!
Nah, working hard on the new manifold, almost ready to get it ported. Should be a nice little example, all for Ł30 quid stainless materials!
#130
Hello everybody happy new year!!
Progress has been slow due to alcohol abuse
Started doing bits to the wiring this part is for the fuel tank,removed the old tape and covered with overbraid and heat shrinks on the ends.
Before
Striped the hubs down for powder coating and new bearings,only to find that some silly twat
has done a bodge job on one of the flanges trying to use a non ABS type.So if any body reading this has got a flange PM me please.THANKS
The first pic is the fck flange have a look at the tread and the homemade spline.
Progress has been slow due to alcohol abuse
Started doing bits to the wiring this part is for the fuel tank,removed the old tape and covered with overbraid and heat shrinks on the ends.
Before
Striped the hubs down for powder coating and new bearings,only to find that some silly twat
has done a bodge job on one of the flanges trying to use a non ABS type.So if any body reading this has got a flange PM me please.THANKS
The first pic is the fck flange have a look at the tread and the homemade spline.
Last edited by johnyjn; 08-02-2009 at 02:54 AM.
#140
Hi all,just had the front hubs powder coated and some other bits will post some pics later, next saturday will be painting the engine bay and putting it back on its front wheels.(At last) todays job is to put new wheel bearings in the hubs ready for fitting. Big thanks to paul rs spares for the hubs and ronnie for the bottom arms
#157
Mulechild
iTrader: (3)
Join Date: Feb 2006
Location: North Wales
Posts: 1,667
Likes: 0
Received 0 Likes
on
0 Posts
i never really took many photos of it when it was on the road (now in 1000 pieces) but heres a couple..
Last edited by philram; 27-01-2009 at 08:58 PM.