440bhp 2wd msd tuned sapphire summer resto
09-06-2008, 09:13 PM
#1
Too many posts.. I need a life!!
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: Torquayish
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
440bhp 2wd msd tuned sapphire summer resto
Here goes nothing,finally got the motivation to do it,poor cars been sat in the garage ever since it did the last diff.so over the weekend starting getting ready for underbody resto,all the nice bits under the engine have gone abit funny being in the garage so thats next.
before the diff went
the diff lol
box
for sale
tank(had to cut it off as bolts were fooked)
im suprised how clean it is really,no nastys whatsoever,just surface rust.then tonight i took the beam off
engine bay is looking well sorry for itself
plans are make everything new,get fuel tank in boot mabye uprate the beam,got a diff being built as a favour,got the dog box to go in,rewire fuel pump and so on,
before the diff went
the diff lol
box
for saletank(had to cut it off as bolts were fooked)
im suprised how clean it is really,no nastys whatsoever,just surface rust.then tonight i took the beam off
engine bay is looking well sorry for itself
plans are make everything new,get fuel tank in boot mabye uprate the beam,got a diff being built as a favour,got the dog box to go in,rewire fuel pump and so on,
12-06-2008, 07:34 PM
#3
Too many posts.. I need a life!!
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: Torquayish
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
I love drivfting it in the rain so not really bothered,just want it to last another 18yrs lol.
Still got seats and cage to fit too,still deciding what beam to use,its only for fast road so dont need anything to special,also fancy some deep dish hockenheim style wide wheels or mabye some cxn's with black centres.
Still got seats and cage to fit too,still deciding what beam to use,its only for fast road so dont need anything to special,also fancy some deep dish hockenheim style wide wheels or mabye some cxn's with black centres.
12-06-2008, 08:20 PM
#4
how long till its done do u think..? went up to that street wars thing last weekend would look good with a few more cossies smoking up that little strip.. ill try and take mine up on the next one and whack the welded diff in... i have been thinking about an adjustable beam but not got 1k to spend just to make it grip... i went in marco's 3door and couldnt belive how well it gripped.. didnt even spin the wheels at all and has a gt30 on... think his has some group a beam but certainly works... have thought of selling mine every time something goes wrong but seem to keep spending...
allto dive it a few times a year...
allto dive it a few times a year...
Trending Topics
18-01-2009, 12:01 PM
#13
Too many posts.. I need a life!!
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: Torquayish
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
Here's the spec so far,
200block built by bluesprint
balanced bottom end with shot peened rods
proper long stud conversion
WRC headgasket
forged pistons
7:5:1
ported 2wd head
bd 10 cam
isky valve springs
vernier pulleys
greys
-31
T38
bailey turbo filter
k&n cone
motorsport leads
grpA coil
full samcos
pace turbo cooler
pace rs500 cooler
pace radiator
pace swirl pot
pace PAS tank
bailey turbo damper
bailey oil seperator
044 fuel pump
ap 4pots
polybushed all round
konis front,billys rear
Straight cut dog box
gripper diff
incar fuel cell
saftey devices cage
grp A hubs
MAPPED BY MOTORSPORT DEVELOPMENTS
L8 ecu,closed loop,rev limit set to 7500rpm
air to air
oil pressure/boost/afr gauges
200block built by bluesprint
balanced bottom end with shot peened rods
proper long stud conversion
WRC headgasket
forged pistons
7:5:1
ported 2wd head
bd 10 cam
isky valve springs
vernier pulleys
greys
-31
T38
bailey turbo filter
k&n cone
motorsport leads
grpA coil
full samcos
pace turbo cooler
pace rs500 cooler
pace radiator
pace swirl pot
pace PAS tank
bailey turbo damper
bailey oil seperator
044 fuel pump
ap 4pots
polybushed all round
konis front,billys rear
Straight cut dog box
gripper diff
incar fuel cell
saftey devices cage
grp A hubs
MAPPED BY MOTORSPORT DEVELOPMENTS
L8 ecu,closed loop,rev limit set to 7500rpm
air to air
oil pressure/boost/afr gauges
18-01-2009, 07:20 PM
#17
Too many posts.. I need a life!!
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: Torquayish
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
Im such a lazy cunt
,i'd rather be out using cars than working on them in a freezing cold garage,thats why its taking me forever to get under it and get it finished.plus my mate has a 650hp r32 gtr that needs to be shown what a cossie can do
,i'd rather be out using cars than working on them in a freezing cold garage,thats why its taking me forever to get under it and get it finished.plus my mate has a 650hp r32 gtr that needs to be shown what a cossie can do
19-01-2009, 06:44 PM
#20
Mr. Sparkle!
Join Date: Nov 2005
Location: Wiltshire - swindon
Posts: 12,775
Likes: 0
Received 0 Likes
on
0 Posts
24-01-2010, 05:41 PM
#21
Too many posts.. I need a life!!
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: Torquayish
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
Hahaha I still havent done anything!!!!! I thinking about paying someone to finish it for me but have no idea who to use? Ive got a nice big list of "to do's" and just want to pay someone to do it, the aim is to take it leman this year.
Who would you use? im in devon and havent got a clue who I should trust with my baby lol.
.Who would you use? im in devon and havent got a clue who I should trust with my baby lol.
Thread
Thread Starter
Forum
Replies
Last Post
