Portuguese fiesta mk4
12-04-2008, 08:54 PM
#1
Sandpaperman in acction
Thread Starter
Join Date: Oct 2007
Location: Lisbon
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Portuguese fiesta mk4
since 3 years ago i've been modding my fiesta.
here some of he mods
when i buy it
first thing to do is to go down with a decent set of koni
thing i need a little bit o f power so i removed the cat and a new set of wheels
i tryed ones of a saxo and i liked
pissed off with the rubering of the low offset of the wheels i trade with a guy who wanted the saxo wheels and he gave me a set of a fiesta mk6 15
without centers
with centers
next with the brake pads in the end and teh disks too I think wy not to upgrade. so i look for an upgrade and i found in teh scrapyard a fiesta mk5 with vented disks
with the car too high with the new wheels and the 195\55 r5 continental tyres i think in make it more agressive and paint teh old wheels with antracite
it lowered a bit but not enaught, but i keep it for a long time :P
when a mate gave me a set of 195 45 set of tyres i tinhk in the 15 and to buy new springs to lower more
3 months later a mate wanted my wheels so i trade with him and a smal amount of cash
bu teh fourteens go to his place again and my mates 14 of the mk4 are preparing to look cool so i tried an ideia i saw in teh net polishing the lip
it looked so cool that offers fall from the sky and they gone
so the mk5 wheels are on but tehy need a bit of style ;P
"cleaning" the wheels
then the primer
semy gloss black paint
and my final touch
sporty
just need someting else. a canon and a new exhasust system
just screams so loud and cool but no for a long time because my ears hurt :P so the original back box came o his original place.
in my quest for power I visited the internet and the scrapyard so many times that i found what i'm looking for (but not enought ( i need more poweeeeer but in the same car))
so i tried a few tricks
i cut the bottom of the airbox and fit a panel filter from pipercross
a set of mondeo's injectors from a 1.8 115cv, a throttle and the maf sensor from a 1.4 puma.it result but not enough . so i few hours in the internet in my quest for power and another hours with my dremel 300 and "SANDPAPER" i done this gasflowed trottle.
here some of he mods
when i buy it
first thing to do is to go down with a decent set of koni
thing i need a little bit o f power so i removed the cat and a new set of wheels
i tryed ones of a saxo and i liked
pissed off with the rubering of the low offset of the wheels i trade with a guy who wanted the saxo wheels and he gave me a set of a fiesta mk6 15
without centers
with centers
next with the brake pads in the end and teh disks too I think wy not to upgrade. so i look for an upgrade and i found in teh scrapyard a fiesta mk5 with vented disks
with the car too high with the new wheels and the 195\55 r5 continental tyres i think in make it more agressive and paint teh old wheels with antracite
it lowered a bit but not enaught, but i keep it for a long time :P
when a mate gave me a set of 195 45 set of tyres i tinhk in the 15 and to buy new springs to lower more
3 months later a mate wanted my wheels so i trade with him and a smal amount of cash
bu teh fourteens go to his place again and my mates 14 of the mk4 are preparing to look cool so i tried an ideia i saw in teh net polishing the lip
it looked so cool that offers fall from the sky and they gone
so the mk5 wheels are on but tehy need a bit of style ;P
"cleaning" the wheels
then the primer
semy gloss black paint
and my final touch
sporty
just need someting else. a canon and a new exhasust system
just screams so loud and cool but no for a long time because my ears hurt :P so the original back box came o his original place.
in my quest for power I visited the internet and the scrapyard so many times that i found what i'm looking for (but not enought ( i need more poweeeeer but in the same car))
so i tried a few tricks
i cut the bottom of the airbox and fit a panel filter from pipercross
a set of mondeo's injectors from a 1.8 115cv, a throttle and the maf sensor from a 1.4 puma.it result but not enough . so i few hours in the internet in my quest for power and another hours with my dremel 300 and "SANDPAPER" i done this gasflowed trottle.
Trending Topics
02-07-2008, 12:42 PM
#14
Sandpaperman in acction
Thread Starter
Join Date: Oct 2007
Location: Lisbon
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
new updates and
i find a induction kit for a mini cooper and started modding to fit on fiesta
cut a piece of the maf sensor
i find a induction kit for a mini cooper and started modding to fit on fiesta
cut a piece of the maf sensor
Last edited by Fiesta_ie; 02-07-2008 at 12:46 PM.
keep your chin up
05-11-2008, 12:43 PM
#21
Sandpaperman in acction
Thread Starter
Join Date: Oct 2007
Location: Lisbon
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
more news a dyno day for my fiesta
81.3 hp and 130nm
and can anybody tell something, when the mesured the car on the dyno they only used 3º gear. this is a correct thing??
and some new fotos
81.3 hp and 130nm
and can anybody tell something, when the mesured the car on the dyno they only used 3º gear. this is a correct thing??
and some new fotos
Thread
Thread Starter
Forum
Replies
Last Post
Steve Escos
Ford RS Turbo Parts for Sale
0
01-10-2015 06:57 AM
