Zzz...Zzz sleeper granada
#1
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2003
Location: Norway
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Zzz...Zzz sleeper granada
After several years of faithfull service, i wanted something new..
I was about to buy a fully prepped r32 skyline from japan, but made a last minute decision - everybody can buy a car, but not everbody can modify a car... so i opted for contiuning with the old ford... after all i have owned it for 12 years and am quite fond of it! ;-P
The easy way that most people choose, is not for me , everyone can buy a new car change oil and fill fuel , but not everybody can build a car that...and the latter kind of rise the stakes a bit
We will give it new just about everything basicly, as you will see in this thread.
Engine will be based on a heavily modified twin turbo charged FORD GT/Shelby GT500/koeniggsegg engine/ (they use ford mod motors - more info on that here : (http://en.wikipedia.org/wiki/Ford_Modular_engine) ), but with far more robust internals fitted, and a whole host of one off parts fabricated to specification by us wich is necessary to achieve the very high performance criteria set for the project.
Transmission is built in california by liberty.
This is going to be a hypercar humiliator, and you may quote me on that...
This is what she looked like when it had the 600rwhp Ford Cosworth YB engine just before we tore her down for her final evolution
Today (2010), she looks like this :
So , to the build, read trough this thread and you can watch her "rebirth as a real Zzzleper and a supercar slayer
New rear suspension off a mustang cobra R, wich obviously is going to have some major mods as well, duo to both the power levels we will be running and beacuse the original design of it has quite a few flaws..
WE had to make som space..
dummy engine on place :
/Joel
I was about to buy a fully prepped r32 skyline from japan, but made a last minute decision - everybody can buy a car, but not everbody can modify a car... so i opted for contiuning with the old ford... after all i have owned it for 12 years and am quite fond of it! ;-P
The easy way that most people choose, is not for me , everyone can buy a new car change oil and fill fuel , but not everybody can build a car that...and the latter kind of rise the stakes a bit
We will give it new just about everything basicly, as you will see in this thread.
Engine will be based on a heavily modified twin turbo charged FORD GT/Shelby GT500/koeniggsegg engine/ (they use ford mod motors - more info on that here : (http://en.wikipedia.org/wiki/Ford_Modular_engine) ), but with far more robust internals fitted, and a whole host of one off parts fabricated to specification by us wich is necessary to achieve the very high performance criteria set for the project.
Transmission is built in california by liberty.
This is going to be a hypercar humiliator, and you may quote me on that...
This is what she looked like when it had the 600rwhp Ford Cosworth YB engine just before we tore her down for her final evolution
Today (2010), she looks like this :
So , to the build, read trough this thread and you can watch her "rebirth as a real Zzzleper and a supercar slayer
New rear suspension off a mustang cobra R, wich obviously is going to have some major mods as well, duo to both the power levels we will be running and beacuse the original design of it has quite a few flaws..
WE had to make som space..
dummy engine on place :
/Joel
Last edited by Zzz...Zzz; 17-06-2012 at 03:35 AM.
Trending Topics
#9
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2003
Location: Norway
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
#21
DEYTUKURJERBS
The following users liked this post:
mike77cos (27-11-2022)
#33
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2003
Location: Norway
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Wow , what a warm welcome - again, long time since i was in here!
Glad you like our project! Hope to start testing in in end of mai start of june!
We'd shure like to bring the car come to some events in england, invite us!
We just have to make the car work first
Glad you like our project! Hope to start testing in in end of mai start of june!
We'd shure like to bring the car come to some events in england, invite us!
We just have to make the car work first
#35
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2003
Location: Norway
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Will be carbon plates here, and a fuel cell
the Dummy engine test fitted withan inlet and the throttle body we are using
4 plate carbon/carbon clutch
turbos, dashlogger , engine and ignition management..
Twin stainless 3.5" systems with V-band clamps at 4 positions on each system for easyer servicing.
the Dummy engine test fitted withan inlet and the throttle body we are using
4 plate carbon/carbon clutch
turbos, dashlogger , engine and ignition management..
Twin stainless 3.5" systems with V-band clamps at 4 positions on each system for easyer servicing.
Last edited by Zzz...Zzz; 22-03-2008 at 11:14 PM.
#36
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2003
Location: Norway
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
it is an accusump yes, to prevent engine oil starvation during hard cornering ,braking, and now with the new setup - during accelration as well.
#37
I've found that life I needed.. It's HERE!!
Join Date: Oct 2007
Location: Straight outta Essex
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
That transmission tunnel fabrication is truly fookin stunning!!
As regards the rest? Work of ART!!
I will was with interest!
As regards the rest? Work of ART!!
I will was with interest!
#39
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2003
Location: Norway
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts