(COLEYST200)-My 3DR Rebuild (06/05/13) motor coming out
#1089
I've found that life I needed.. It's HERE!!
iTrader: (1)
Join Date: Dec 2007
Location: birmingham
Posts: 1,005
Likes: 0
Received 0 Likes
on
0 Posts
not good mate if ya need a hand mate gettin it out give me a shout im not workin this weekend mate oh an is there any chance i can come have look at the pivot point in the
t5 box for the clutch fork
t5 box for the clutch fork
#1092
PassionFord Post Whore!!
iTrader: (3)
small update as im spending most of my time working on my Focos i dont do much to the 3dr but i do do small things to it from time to time
I got these of Bramer
And it might sound mad but one fing that has all ways done my head in is the filler cap it never sat right
You can just see in this photo wot im on about
And this is how it looks now so at last im happy with the wat it looks
I got these of Bramer
And it might sound mad but one fing that has all ways done my head in is the filler cap it never sat right
You can just see in this photo wot im on about
And this is how it looks now so at last im happy with the wat it looks
#1094
PassionFord Post Whore!!
iTrader: (3)
its been a long time sins iv done a update on here on my 3dr cosworth well the time has come for me to poll the motor out of the old girl as there is some thing going on inside the motor which we just can not figer out so iv started building a new motor as the plan is to use as much as pos of my old motor as the only thing we can put it down to is piston slap but its on 4x4 pistons that have only done 9000 miles in this motor
i got martin to pocket the pistons for me but as this my new block had been wire rung i had them removed which lost 1mm off the top of the block so iv had to remove the same from the pistons so they dont hit the head
i got martin to pocket the pistons for me but as this my new block had been wire rung i had them removed which lost 1mm off the top of the block so iv had to remove the same from the pistons so they dont hit the head
#1095
Lucifer II - 666
Back when I said your Focos sounded better than ya 3dr engine I never dreamed it would end in rebuild mate
Good progress though Ian
Good progress though Ian
#1100
Lucifer II - 666
He's just spam mate
#1106
I'm Finding My Feet Here Now
read through this over the last few days, seen the car about quite a few times as I live nearby but I never knew just how much work went into it until now!! it is a credit to you and everyone who has worked on it. It is also a big inspiration to many I am sure.
After having many fords over the years, I have been on the VW scene for the last 5 yrs and was contemplating weather to go Ford again, this thread alone has made my mind up for me....... Cos!! Off to have a nose at you Focos thread now
After having many fords over the years, I have been on the VW scene for the last 5 yrs and was contemplating weather to go Ford again, this thread alone has made my mind up for me....... Cos!! Off to have a nose at you Focos thread now
#1108
PassionFord Post Whore!!
iTrader: (3)
Well it's been a very long time since this car has seen daylight . Well today my good mate Rex popped over to ware the car is tucked away and removed the battery off the old girl as I've decided it's time to get this car out of storage and get her running again for the summer . I'm planning on getting her this coming weekend . He tuck these 3 photos when he was there .
#1109
10K+ Poster!!
Look forward to seeing it all cleaned up...lovely car
#1110
PassionFord Post Whore!!
iTrader: (3)
Well the car is home 👍👍
We had to drag it out with my Volvo xc90 as the bricks was stuck on . We had to put the ECU back on and pulled all the plugs out then spun it over to get the oil round the motor . After 10 Lt of petrol the motor started to cof a bit then it fired up and shut down one more turn of the key and the motor come to life and sounded so nice
I stuck it in reverse and drove out the garage onto the drive way for the first time in 5 years
And a quick spin round the block then loaded up ready for it's 40 mile trip home to LEICESTER
Just before it's first clean in a long time
So happy to have her home at last
Cleaned up and tucked away for now . but a lot of work to sort this old girl out to get ready for the road
We had to drag it out with my Volvo xc90 as the bricks was stuck on . We had to put the ECU back on and pulled all the plugs out then spun it over to get the oil round the motor . After 10 Lt of petrol the motor started to cof a bit then it fired up and shut down one more turn of the key and the motor come to life and sounded so nice
I stuck it in reverse and drove out the garage onto the drive way for the first time in 5 years
And a quick spin round the block then loaded up ready for it's 40 mile trip home to LEICESTER
Just before it's first clean in a long time
So happy to have her home at last
Cleaned up and tucked away for now . but a lot of work to sort this old girl out to get ready for the road
#1111
10K+ Poster!!
Looks lovely, probably worth adding 2 bollards that sink in to the concrete floor based on how many of these go missing.
#1114
PassionFord Post Whore!!
iTrader: (3)
Hi Mark it was put away because of uver projects the ex was fully aware of the car but we come to a agreement that she would leave my cars a lown and my pension as long as we come to a financial agreement witch we did in the end so the cars stayed with me 👍
#1116
10K+ Poster!!
"We came to an understanding"....and then on another thread he is laying a massive slab of concrete in his back garden....wonder where she went?
#1120
10K+ Poster!!
They look like they will do the job well. I assume they go inside the garage? I am thinking of getting the same thing. The hydraulic ones cost a fortune.