endangered species..
#1
endangered species..
shes away in the garage for a while till she's all "shiney fucking new"
she was like this when i got her.
then went to this for ages
and went into the garage a year ago looking like this.
i really have to get on and do something with her really .she's still a runner but i want her rebuilt before she bricks herself,as she's at 350 and 150k on the original engine she also needs a bit of tidying up as the 3 odd years of abuse has taken its toll.
so she's getting a paint job and new arches as well as some chassis mods to get her a bit tighter again.
been collecting the parts for the last year as having the house and two new pups has taken time and money.
a phone call to wayne at pro alloy resulted in this lot.
rs500 cooler.
alloy rad
turbo cooler and bailey oil feed pipe with filter for the t34
satin oil breather as im not a fan of the alloy shiney stuff any more
not a bad way to spend over a grand
she was like this when i got her.
then went to this for ages
and went into the garage a year ago looking like this.
i really have to get on and do something with her really .she's still a runner but i want her rebuilt before she bricks herself,as she's at 350 and 150k on the original engine she also needs a bit of tidying up as the 3 odd years of abuse has taken its toll.
so she's getting a paint job and new arches as well as some chassis mods to get her a bit tighter again.
been collecting the parts for the last year as having the house and two new pups has taken time and money.
a phone call to wayne at pro alloy resulted in this lot.
rs500 cooler.
alloy rad
turbo cooler and bailey oil feed pipe with filter for the t34
satin oil breather as im not a fan of the alloy shiney stuff any more
not a bad way to spend over a grand
#2
more bits to the spare room trace not happy with that really but like i say to her its the spare room!its in the name,thats where the spares live
the engine bay is currently a bit boring as you can see
so got some roose silver boost hoses but still need to buy th ewater and ancillaries when i get the cash
as you may tell she is staying with a complete silver and black theme
new fuel pump holder with rubbers and filter and grpa pump to help out as the standard will struggle over 350bhp
more odds and sod like clutch rachet and sump bung.
gradually the weather strips and door rub strips are arriving
forge front strut brace and rear powerflex bushes to go on.already has front bushes fitted and will be going to danny b when running for his rear brace and frame connectors
while on the chassis i got mike r's shims to go in it.
and a new bit of rubber in the way of some yokohama pradas.
to clean up the bay from this mess
i got a new bulkhead panel from ford
then for the interior which i have got this far with so far
i got another carpet as mines a bit worn now.needs a steam before i put it in.
and for the worn bolsters on the outside edge of the recaros,new bolsters from ford and new ford cloth
then on to the outside bits.
the arches are a bit scabby so new ones bought
and the front bumper is saggy and the skirts have some "off" damage .so thanks go to 3dr stretch for the bumper and skirts
this is the way she lay at the moment but i will get on it very soon.have to remove the stickers next i spose really
updates will follow as and when,probaly in another year unless you lot nag at me to get my arse in gear.
the engine bay is currently a bit boring as you can see
so got some roose silver boost hoses but still need to buy th ewater and ancillaries when i get the cash
as you may tell she is staying with a complete silver and black theme
new fuel pump holder with rubbers and filter and grpa pump to help out as the standard will struggle over 350bhp
more odds and sod like clutch rachet and sump bung.
gradually the weather strips and door rub strips are arriving
forge front strut brace and rear powerflex bushes to go on.already has front bushes fitted and will be going to danny b when running for his rear brace and frame connectors
while on the chassis i got mike r's shims to go in it.
and a new bit of rubber in the way of some yokohama pradas.
to clean up the bay from this mess
i got a new bulkhead panel from ford
then for the interior which i have got this far with so far
i got another carpet as mines a bit worn now.needs a steam before i put it in.
and for the worn bolsters on the outside edge of the recaros,new bolsters from ford and new ford cloth
then on to the outside bits.
the arches are a bit scabby so new ones bought
and the front bumper is saggy and the skirts have some "off" damage .so thanks go to 3dr stretch for the bumper and skirts
this is the way she lay at the moment but i will get on it very soon.have to remove the stickers next i spose really
updates will follow as and when,probaly in another year unless you lot nag at me to get my arse in gear.
Trending Topics
#9
BIG TONY RS
will get the part number later for you pal.think it was about 28quid iirc.
KSA-Cossie
Red16
thanks i will try and get into it
Cliff S1
ok ok i promise
Charlie Chalk
my head is full of lots of ideas on the build tbh rad im still bouncing between stu and harvey really but i just dont know there are others i should consider i spose but they are the ones i keep thinking back to
James998
thats also another big decision cant decide if i want to put them back on new paint. will have to do a poll i spose.
strange really as alot of people slate srtipes saying they are 80/90's but everyone says keep em to me
will get the part number later for you pal.think it was about 28quid iirc.
KSA-Cossie
Red16
thanks i will try and get into it
Cliff S1
ok ok i promise
Charlie Chalk
my head is full of lots of ideas on the build tbh rad im still bouncing between stu and harvey really but i just dont know there are others i should consider i spose but they are the ones i keep thinking back to
James998
thats also another big decision cant decide if i want to put them back on new paint. will have to do a poll i spose.
strange really as alot of people slate srtipes saying they are 80/90's but everyone says keep em to me
#10
been out on the old girl today taking the stripes off for when she gets her new lick of paint
didnt think they would take so long to get off but here you go.
the bad bits show a bit more due to being clean lined now
will get on it again on my next day off,but i eally dont like pushing the heavy git back in the garage,its up a dip
and i leant against the car with my day old tatoo on my chest @kin hell it hurt what a twat i am
didnt think they would take so long to get off but here you go.
the bad bits show a bit more due to being clean lined now
will get on it again on my next day off,but i eally dont like pushing the heavy git back in the garage,its up a dip
and i leant against the car with my day old tatoo on my chest @kin hell it hurt what a twat i am
#19
PassionFord Post Whore!!
iTrader: (3)
Join Date: Jun 2003
Location: Maldon, Essex!
Posts: 4,186
Likes: 0
Received 0 Likes
on
0 Posts
You've got some really smart new parts there Neil, this projects gonna be a cracker, i'll certainly be keeping check on it and nagging at ya to do some more. Cant wait to see her again, i'll have to pop over and see ya once things really get going on it
#20
Brookesy
garage is far too small pal. have to push her in and out all the time. be glad when i can build a double on the side.
no aeroquip,just the fitting kit for the gpr a pup.not a huge fan of aeroquip due to the hoses getting shitty but i may get a little bit.
strut brace staying as is.its far too expensive and nice to paint. the only bit of bling i'll allow.
AGAR-COSWORTH
cheers fella,i dont want to cut corners.she's worth the extra as she's silver and i cant face getting rid of her.
M K
will do my best matey. bare in mind im shit at mechanics
EssexMikeSi
cheers mike,you are more than welcome to pop round when you are in the area.
garage is far too small pal. have to push her in and out all the time. be glad when i can build a double on the side.
no aeroquip,just the fitting kit for the gpr a pup.not a huge fan of aeroquip due to the hoses getting shitty but i may get a little bit.
strut brace staying as is.its far too expensive and nice to paint. the only bit of bling i'll allow.
AGAR-COSWORTH
cheers fella,i dont want to cut corners.she's worth the extra as she's silver and i cant face getting rid of her.
M K
will do my best matey. bare in mind im shit at mechanics
EssexMikeSi
cheers mike,you are more than welcome to pop round when you are in the area.
#23
Originally Posted by COSSIE CAL
neil it isnt normal with out stripes,please tell me you will get stripes again?
1,will i still like them when im 40
2,can i warrant putting them over a new 2k paint job
3,i took them off and either due to the shonky paint job before or the fact they were a proper set of stickers,they peeled the laquer off in a few small places .i wouldnt want to change my mind later and ruin the paint again.
have to see what others think,or speak top a painter
#24
PassionFord Post Whore!!
iTrader: (17)
Join Date: May 2004
Posts: 5,618
Likes: 0
Received 0 Likes
on
0 Posts
good luck with it all mate even if it does take a couple of years at least you'll know its all done to exactly how u want it to be if theirs any bits you need i've still got lots of bits off of my old saph that i've been to lazy to take pic's of and sell doors trim panels loads of bits
#25
Originally Posted by RONNIE AMIS
good luck with it all mate even if it does take a couple of years at least you'll know its all done to exactly how u want it to be if theirs any bits you need i've still got lots of bits off of my old saph that i've been to lazy to take pic's of and sell doors trim panels loads of bits
do you still have the dash?if so is it the real dark one?mines a 91 4x4 with dark cloth so dont know if yours was different being leather.
probaly lots of biti need but its remembering them all.
#26
PassionFord Post Whore!!
iTrader: (17)
Join Date: May 2004
Posts: 5,618
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NIL 7717
Originally Posted by RONNIE AMIS
good luck with it all mate even if it does take a couple of years at least you'll know its all done to exactly how u want it to be if theirs any bits you need i've still got lots of bits off of my old saph that i've been to lazy to take pic's of and sell doors trim panels loads of bits
do you still have the dash?if so is it the real dark one?mines a 91 4x4 with dark cloth so dont know if yours was different being leather.
probaly lots of biti need but its remembering them all.
#28
RONNIE AMIS
no probs i'll let you know when i find other bits i need.
dakar
cheers pal, yeah the panel is fin number 1648626.
helps to have a helpful friendly ford parts chap who has been around since the cossies.i have two at my dealer and they know me through work so go the extra to get my bits
no probs i'll let you know when i find other bits i need.
dakar
cheers pal, yeah the panel is fin number 1648626.
helps to have a helpful friendly ford parts chap who has been around since the cossies.i have two at my dealer and they know me through work so go the extra to get my bits
#30
20K+ Super Poster.
Join Date: Jun 2003
Location: Local, when i'm home...
Posts: 22,888
Likes: 0
Received 0 Likes
on
0 Posts
Glad you've started a thread mate, be nice to see some progress with this one!
Where did you get the new door strips from though? Mine are totally fucked!
Where did you get the new door strips from though? Mine are totally fucked!
#31
Originally Posted by Dan
Glad you've started a thread mate, be nice to see some progress with this one!
Where did you get the new door strips from though? Mine are totally fucked!
Where did you get the new door strips from though? Mine are totally fucked!
cheers.ive been moaned at by a few of my mates to get my backside of the couch and get started and to put a thread on.i spose they were right really,as it has been in the garage a year now without me touching it but im on my way now,so lets hope i dont stall and get in my old habits again
i got the rub strips from ford themselves mate.but im still waiting for two to come from germany.been waiting two months
as a few of you are asking i'll put the fins up on here for you.the only one not availbe from ford is the front driver wing one.
f1651171
f1651172
f1651173
f1651174
f1651192
hope you can all get them.the more orders ford get the more they will keep making
#35
PassionFord Post Whore!!
Join Date: Apr 2004
Location: oxfordshire/berkshire
Posts: 7,053
Likes: 0
Received 0 Likes
on
0 Posts
Neil how much was this little lot
new fuel pump holder with rubbers and filter and grpa pump to help out as the standard will struggle over 350bhp
Whot power you looking to go to i should have a spare set of "BLACKS" Soon i hoping for a good 370 ish
new fuel pump holder with rubbers and filter and grpa pump to help out as the standard will struggle over 350bhp
Whot power you looking to go to i should have a spare set of "BLACKS" Soon i hoping for a good 370 ish
#36
Originally Posted by Alan s1
Neil how much was this little lot
new fuel pump holder with rubbers and filter and grpa pump to help out as the standard will struggle over 350bhp
Whot power you looking to go to i should have a spare set of "BLACKS" Soon i hoping for a good 370 ish
new fuel pump holder with rubbers and filter and grpa pump to help out as the standard will struggle over 350bhp
Whot power you looking to go to i should have a spare set of "BLACKS" Soon i hoping for a good 370 ish
ass for power im hoping to get 400bhp and a similar torque figure from her.any more and i think she will eat too many boxes plus i think thats a good power output for the 4x4.
how come you will have spare BLACKS?you not going as far as first intended on power?what would you want for them?
#39
20K+ Super Poster.
Join Date: Jun 2003
Location: Local, when i'm home...
Posts: 22,888
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NIL 7717
Originally Posted by Dan
Glad you've started a thread mate, be nice to see some progress with this one!
Where did you get the new door strips from though? Mine are totally fucked!
Where did you get the new door strips from though? Mine are totally fucked!
cheers.ive been moaned at by a few of my mates to get my backside of the couch and get started and to put a thread on.i spose they were right really,as it has been in the garage a year now without me touching it but im on my way now,so lets hope i dont stall and get in my old habits again
i got the rub strips from ford themselves mate.but im still waiting for two to come from germany.been waiting two months
as a few of you are asking i'll put the fins up on here for you.the only one not availbe from ford is the front driver wing one.
f1651171
f1651172
f1651173
f1651174
f1651192
hope you can all get them.the more orders ford get the more they will keep making