2018 - Show us your RS Turbos
#1
Advanced PassionFord User
Thread Starter
2018 - Show us your RS Turbos
RS Turbo owners who currently own the cars get some pictures up of your cars, surely still a few owners on here.
#2
I've found that life I needed.. It's HERE!!
Here’s mine poking out the Garage after getting the bonnet and bumper repainted a few months ago
The following users liked this post:
RSMK4TURBO (28-02-2018)
#3
Advanced PassionFord User
Thread Starter
The following users liked this post:
RSMK4TURBO (01-03-2018)
#5
Advanced PassionFord User
Thread Starter
The following users liked this post:
bluntys1rsturbo (01-03-2018)
The following 2 users liked this post by Rsmat:
RSMK4TURBO (01-03-2018),
visa_broke (02-03-2018)
#7
10K+ Poster!!
RS Mat's is probably the best I have ever seen.
I think I may own a fiesta RS turbo one day, something about them I like.
I think I may own a fiesta RS turbo one day, something about them I like.
The following users liked this post:
Rsmat (01-03-2018)
Trending Topics
#8
Advanced PassionFord User
Thread Starter
Stunning escort Matt
The following users liked this post:
Rsmat (01-03-2018)
#9
300+
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,259
Received 583 Likes
on
516 Posts
Thanks mate its coming on great ..hopefully will only get better .
#10
Advanced PassionFord User
I got both a S2 and a FRST, I love them both, But sometimes I do wonder why I bother with the FRST I've had it roughly 4 years I think i've only drove it a couple of 1000 miles.
Still better than money in the bank.
Doubt pics work on PB still:
I love flaps on my RS cars, I dont have many pics on PB as its so slow.
Everyone has different opinions on how an RS should look/who has the best, I like to think my FRST is one of the best, and my S2 is one of the better of the highly modified S2 turbos.
Found some more files in different folder.
Gutted the car never came with the standard knob, So scoured the next best thing a NOS Escort GTi green top leather knob, to replace the low spec knob that come with the car.
Still have standard alloys, Fitted RS2000 alloys and front brake set up.
Still better than money in the bank.
Doubt pics work on PB still:
I love flaps on my RS cars, I dont have many pics on PB as its so slow.
Everyone has different opinions on how an RS should look/who has the best, I like to think my FRST is one of the best, and my S2 is one of the better of the highly modified S2 turbos.
Found some more files in different folder.
Gutted the car never came with the standard knob, So scoured the next best thing a NOS Escort GTi green top leather knob, to replace the low spec knob that come with the car.
Still have standard alloys, Fitted RS2000 alloys and front brake set up.
Last edited by RSmark84; 01-03-2018 at 11:27 PM.
#12
300+
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,259
Received 583 Likes
on
516 Posts
I got both a S2 and a FRST, I love them both, But sometimes I do wonder why I bother with the FRST I've had it roughly 4 years I think i've only drove it a couple of 1000 miles.
Still better than money in the bank.
Doubt pics work on PB still:
I love flaps on my RS cars, I dont have many pics on PB as its so slow.
Everyone has different opinions on how an RS should look/who has the best, I like to think my FRST is one of the best, and my S2 is one of the better of the highly modified S2 turbos.
Found some more files in different folder.
Gutted the car never came with the standard knob, So scoured the next best thing a NOS Escort GTi green top leather knob, to replace the low spec knob that come with the car.
Still have standard alloys, Fitted RS2000 alloys and front brake set up.
Still better than money in the bank.
Doubt pics work on PB still:
I love flaps on my RS cars, I dont have many pics on PB as its so slow.
Everyone has different opinions on how an RS should look/who has the best, I like to think my FRST is one of the best, and my S2 is one of the better of the highly modified S2 turbos.
Found some more files in different folder.
Gutted the car never came with the standard knob, So scoured the next best thing a NOS Escort GTi green top leather knob, to replace the low spec knob that come with the car.
Still have standard alloys, Fitted RS2000 alloys and front brake set up.
Host the pics through imgur mate.. and what specs the S2 .
The following 2 users liked this post by Cameron:
Rsmat (02-03-2018),
RSMK4TURBO (02-03-2018)
#14
Advanced PassionFord User
Pics worked last night. Strange the aint now.
Huge spec, tuned to 190 BHP(perfect for me) engine, Carbon fibre roof, OMP harnesses, Safety devices 6 point cage, 4 spoke steering wheel releathered and red stitching, top of steering wheel in red leather. Airtec rad, FMIC and turbo cooler, Stage 1 hybrid turbo, various gauges(4) electric mirrors and trip computer fit by myself, 4 pot brakes on 283mm? discs 12mm spacers on standard alloys lowered 40mm poly bushes all round, st/st braided hoses under the car, inc pump cradle. chipped ECU, high lift camshaft kit. Carrello 640 still fitted, ambers all round, headlight protectors, full Escort MK4 rubber mats, Omex launch control, Omex shift sequential indicator, GRP A coil, MSD coil loom, Autodynamix fan loom, Lots of NOS parts fitted, White painted chassis, Optional dealership side body moulding. full pro hoses under the bonnet.
There's plenty i've missed in sure.
Huge spec, tuned to 190 BHP(perfect for me) engine, Carbon fibre roof, OMP harnesses, Safety devices 6 point cage, 4 spoke steering wheel releathered and red stitching, top of steering wheel in red leather. Airtec rad, FMIC and turbo cooler, Stage 1 hybrid turbo, various gauges(4) electric mirrors and trip computer fit by myself, 4 pot brakes on 283mm? discs 12mm spacers on standard alloys lowered 40mm poly bushes all round, st/st braided hoses under the car, inc pump cradle. chipped ECU, high lift camshaft kit. Carrello 640 still fitted, ambers all round, headlight protectors, full Escort MK4 rubber mats, Omex launch control, Omex shift sequential indicator, GRP A coil, MSD coil loom, Autodynamix fan loom, Lots of NOS parts fitted, White painted chassis, Optional dealership side body moulding. full pro hoses under the bonnet.
There's plenty i've missed in sure.
The following 2 users liked this post by RSmark84:
Rsmat (02-03-2018),
RSMK4TURBO (02-03-2018)
#16
Advanced PassionFord User
Thread Starter
The following users liked this post:
Rsmat (03-03-2018)
#18
Boost addict
nice to see a few more on here surely theres gotta be more though so lets see them
iv always liked the fiestas even back when it seemed most people in the ford/rs scene really looked down there nose at them.
id absolutely love a nice series one but i cant see that one happening (yet anyway)
iv always liked the fiestas even back when it seemed most people in the ford/rs scene really looked down there nose at them.
id absolutely love a nice series one but i cant see that one happening (yet anyway)
The following 2 users liked this post by Martins1:
Rsmat (03-03-2018),
RSMK4TURBO (03-03-2018)
#20
Advanced PassionFord User
Funny you should say that, I always looked down on the FRST over the S2. But funny how times move on, I started to really like them about 8 years ago. I thought about selling my old Evo for one in 2011. Nowadays the FRST is worth more than the average S2, I'd say mine is worth more than my ERST, But I prefer the Escort over the Fiesta... Plus I think FRST handles awful compared to the S2.
#21
Advanced PassionFord User
Thread Starter
#22
300+
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,259
Received 583 Likes
on
516 Posts
Spec of mine so far .
EFI block
EFI Flywheel and CPS
PEC Rods
Wossner Pistons
Brand new Ford Crank .
Brand new s2 Ford oil pump
Gated and baffled sump
S1 modified inlet.
Radtec Radiator
Pace Rs500 style single pass intercooler.
Deka 60lb 630cc injectors
Braided engine loom .
Simtek engine management.
Zeitronix zt-2 engine monitor and data logger.
AL Developments ported cross Hatch head.
Harland sharp Roller Rockers.
Newman PH4 cam 200lb springs and solid lifters.
Polo 1.4 coil pack with fiesta turbo leads.
ND Fabrications over the box exhaust manifold.
ND FABRICATIONS down pipe and bracket.
TURBO - honeywell Garrett GTX2867R GEN 2.
AP racing cp2000-35 clutch kit.
IB5 Gearbox with Quaife diff shot peened Gears.
Puma Gear linkage .
AP racing Front brakes.
cosworth 2wd Rear brakes.
Goodridge braided brake lines .
17" race line RL7 motorsport wheels with new R888's
Brand new Genuine Ford indicators
Brand new Genuine Ford corello lights
Brand new Genuine ford rear lights
Brand new Genuine Ford boot gas strutts
Brand new Genuine Ford roof lining
New boot seal
New door seals
New door weather strips
Brand new Genuine Ford interior clock
New rs 3 spoke steering wheel .
And a few this i can't think off ..still loads to do .
EFI block
EFI Flywheel and CPS
PEC Rods
Wossner Pistons
Brand new Ford Crank .
Brand new s2 Ford oil pump
Gated and baffled sump
S1 modified inlet.
Radtec Radiator
Pace Rs500 style single pass intercooler.
Deka 60lb 630cc injectors
Braided engine loom .
Simtek engine management.
Zeitronix zt-2 engine monitor and data logger.
AL Developments ported cross Hatch head.
Harland sharp Roller Rockers.
Newman PH4 cam 200lb springs and solid lifters.
Polo 1.4 coil pack with fiesta turbo leads.
ND Fabrications over the box exhaust manifold.
ND FABRICATIONS down pipe and bracket.
TURBO - honeywell Garrett GTX2867R GEN 2.
AP racing cp2000-35 clutch kit.
IB5 Gearbox with Quaife diff shot peened Gears.
Puma Gear linkage .
AP racing Front brakes.
cosworth 2wd Rear brakes.
Goodridge braided brake lines .
17" race line RL7 motorsport wheels with new R888's
Brand new Genuine Ford indicators
Brand new Genuine Ford corello lights
Brand new Genuine ford rear lights
Brand new Genuine Ford boot gas strutts
Brand new Genuine Ford roof lining
New boot seal
New door seals
New door weather strips
Brand new Genuine Ford interior clock
New rs 3 spoke steering wheel .
And a few this i can't think off ..still loads to do .
The following users liked this post:
RSMK4TURBO (03-03-2018)
#23
Advanced PassionFord User
Thread Starter
Spec of mine so far .
EFI block
EFI Flywheel and CPS
PEC Rods
Wossner Pistons
Brand new Ford Crank .
Brand new s2 Ford oil pump
Gated and baffled sump
S1 modified inlet.
Radtec Radiator
Pace Rs500 style single pass intercooler.
Deka 60lb 630cc injectors
Braided engine loom .
Simtek engine management.
Zeitronix zt-2 engine monitor and data logger.
AL Developments ported cross Hatch head.
Harland sharp Roller Rockers.
Newman PH4 cam 200lb springs and solid lifters.
Polo 1.4 coil pack with fiesta turbo leads.
ND Fabrications over the box exhaust manifold.
ND FABRICATIONS down pipe and bracket.
TURBO - honeywell Garrett GTX2867R GEN 2.
AP racing cp2000-35 clutch kit.
IB5 Gearbox with Quaife diff shot peened Gears.
Puma Gear linkage .
AP racing Front brakes.
cosworth 2wd Rear brakes.
Goodridge braided brake lines .
17" race line RL7 motorsport wheels with new R888's
Brand new Genuine Ford indicators
Brand new Genuine Ford corello lights
Brand new Genuine ford rear lights
Brand new Genuine Ford boot gas strutts
Brand new Genuine Ford roof lining
New boot seal
New door seals
New door weather strips
Brand new Genuine Ford interior clock
New rs 3 spoke steering wheel .
And a few this i can't think off ..still loads to do .
EFI block
EFI Flywheel and CPS
PEC Rods
Wossner Pistons
Brand new Ford Crank .
Brand new s2 Ford oil pump
Gated and baffled sump
S1 modified inlet.
Radtec Radiator
Pace Rs500 style single pass intercooler.
Deka 60lb 630cc injectors
Braided engine loom .
Simtek engine management.
Zeitronix zt-2 engine monitor and data logger.
AL Developments ported cross Hatch head.
Harland sharp Roller Rockers.
Newman PH4 cam 200lb springs and solid lifters.
Polo 1.4 coil pack with fiesta turbo leads.
ND Fabrications over the box exhaust manifold.
ND FABRICATIONS down pipe and bracket.
TURBO - honeywell Garrett GTX2867R GEN 2.
AP racing cp2000-35 clutch kit.
IB5 Gearbox with Quaife diff shot peened Gears.
Puma Gear linkage .
AP racing Front brakes.
cosworth 2wd Rear brakes.
Goodridge braided brake lines .
17" race line RL7 motorsport wheels with new R888's
Brand new Genuine Ford indicators
Brand new Genuine Ford corello lights
Brand new Genuine ford rear lights
Brand new Genuine Ford boot gas strutts
Brand new Genuine Ford roof lining
New boot seal
New door seals
New door weather strips
Brand new Genuine Ford interior clock
New rs 3 spoke steering wheel .
And a few this i can't think off ..still loads to do .
The following users liked this post:
Rsmat (03-03-2018)
#25
Boost addict
Spec of mine so far .
EFI block
EFI Flywheel and CPS
PEC Rods
Wossner Pistons
Brand new Ford Crank .
Brand new s2 Ford oil pump
Gated and baffled sump
S1 modified inlet.
Radtec Radiator
Pace Rs500 style single pass intercooler.
Deka 60lb 630cc injectors
Braided engine loom .
Simtek engine management.
Zeitronix zt-2 engine monitor and data logger.
AL Developments ported cross Hatch head.
Harland sharp Roller Rockers.
Newman PH4 cam 200lb springs and solid lifters.
Polo 1.4 coil pack with fiesta turbo leads.
ND Fabrications over the box exhaust manifold.
ND FABRICATIONS down pipe and bracket.
TURBO - honeywell Garrett GTX2867R GEN 2.
AP racing cp2000-35 clutch kit.
IB5 Gearbox with Quaife diff shot peened Gears.
Puma Gear linkage .
AP racing Front brakes.
cosworth 2wd Rear brakes.
Goodridge braided brake lines .
17" race line RL7 motorsport wheels with new R888's
Brand new Genuine Ford indicators
Brand new Genuine Ford corello lights
Brand new Genuine ford rear lights
Brand new Genuine Ford boot gas strutts
Brand new Genuine Ford roof lining
New boot seal
New door seals
New door weather strips
Brand new Genuine Ford interior clock
New rs 3 spoke steering wheel .
And a few this i can't think off ..still loads to do .
EFI block
EFI Flywheel and CPS
PEC Rods
Wossner Pistons
Brand new Ford Crank .
Brand new s2 Ford oil pump
Gated and baffled sump
S1 modified inlet.
Radtec Radiator
Pace Rs500 style single pass intercooler.
Deka 60lb 630cc injectors
Braided engine loom .
Simtek engine management.
Zeitronix zt-2 engine monitor and data logger.
AL Developments ported cross Hatch head.
Harland sharp Roller Rockers.
Newman PH4 cam 200lb springs and solid lifters.
Polo 1.4 coil pack with fiesta turbo leads.
ND Fabrications over the box exhaust manifold.
ND FABRICATIONS down pipe and bracket.
TURBO - honeywell Garrett GTX2867R GEN 2.
AP racing cp2000-35 clutch kit.
IB5 Gearbox with Quaife diff shot peened Gears.
Puma Gear linkage .
AP racing Front brakes.
cosworth 2wd Rear brakes.
Goodridge braided brake lines .
17" race line RL7 motorsport wheels with new R888's
Brand new Genuine Ford indicators
Brand new Genuine Ford corello lights
Brand new Genuine ford rear lights
Brand new Genuine Ford boot gas strutts
Brand new Genuine Ford roof lining
New boot seal
New door seals
New door weather strips
Brand new Genuine Ford interior clock
New rs 3 spoke steering wheel .
And a few this i can't think off ..still loads to do .
mine in comparison is so inferior but as it stands i took the decision to not go for anything big power and just improve on whats already there.
here is the spec of mine.
freshened up engine all new pumps/belts/gaskets etc including cylinder head overhaul.
hybrid t2 turbo built by wilky (bernies blowers) consisting of escos t28 comp wheel,360 bearing & nissan t28 turbine all machined into oe housings.
newman cvh turbo cam with solid lifters and vernier pulley
anembo billet crank pulley
Airtec stage 2 radiator
Airtec stage 1 fmic
mongoose exhaust system with 4" outward rolled tailpipe
k&n induction kit
running standard boost etc
stack boost gauge
stack oil pressure gauge
aem wideband kit
i have the following bits ready for when it goes to pj motorsport for mapping.
beige injectors
forge adjustable actuator
id be more than happy if it makes anything from 175bhp nice little hike in power without going crazy so we can enjoy the car for a while until i decide to go stage 3 t3,headwork and 220+
#26
300+
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,259
Received 583 Likes
on
516 Posts
what an awesoe spec surely will be one of the finest most thought out cvh turbos on the scene atm?
mine in comparison is so inferior but as it stands i took the decision to not go for anything big power and just improve on whats already there.
here is the spec of mine.
freshened up engine all new pumps/belts/gaskets etc including cylinder head overhaul.
hybrid t2 turbo built by wilky (bernies blowers) consisting of escos t28 comp wheel,360 bearing & nissan t28 turbine all machined into oe housings.
newman cvh turbo cam with solid lifters and vernier pulley
anembo billet crank pulley
Airtec stage 2 radiator
Airtec stage 1 fmic
mongoose exhaust system with 4" outward rolled tailpipe
k&n induction kit
running standard boost etc
stack boost gauge
stack oil pressure gauge
aem wideband kit
i have the following bits ready for when it goes to pj motorsport for mapping.
beige injectors
forge adjustable actuator
id be more than happy if it makes anything from 175bhp nice little hike in power without going crazy so we can enjoy the car for a while until i decide to go stage 3 t3,headwork and 220+
mine in comparison is so inferior but as it stands i took the decision to not go for anything big power and just improve on whats already there.
here is the spec of mine.
freshened up engine all new pumps/belts/gaskets etc including cylinder head overhaul.
hybrid t2 turbo built by wilky (bernies blowers) consisting of escos t28 comp wheel,360 bearing & nissan t28 turbine all machined into oe housings.
newman cvh turbo cam with solid lifters and vernier pulley
anembo billet crank pulley
Airtec stage 2 radiator
Airtec stage 1 fmic
mongoose exhaust system with 4" outward rolled tailpipe
k&n induction kit
running standard boost etc
stack boost gauge
stack oil pressure gauge
aem wideband kit
i have the following bits ready for when it goes to pj motorsport for mapping.
beige injectors
forge adjustable actuator
id be more than happy if it makes anything from 175bhp nice little hike in power without going crazy so we can enjoy the car for a while until i decide to go stage 3 t3,headwork and 220+
It will be a hoot mate ..just enjoy it .that's what it's all about .
The following users liked this post:
Rsmat (04-03-2018)
#35
I don’t know what it makes now, but when it was first built it was mapped on the dyno
And made 401 bhp but this was on a Standard t34 but since then it’s got a gt30 and a different inlet manifold, the engine was built by Ian at area 6 it’s running pectel Management and 8 injectors and one of he’s fully Blown engine 2.1 zetec
I’ve never actually driven the car yet, maybe one day?
And made 401 bhp but this was on a Standard t34 but since then it’s got a gt30 and a different inlet manifold, the engine was built by Ian at area 6 it’s running pectel Management and 8 injectors and one of he’s fully Blown engine 2.1 zetec
I’ve never actually driven the car yet, maybe one day?
#37
I have been thinking about selling it recently, but i can’t make my mind up, I would like to make it a bit more refined on the interior side but I can’t find the parts I need.
After recently owning a mk3 focus rs it made me think do I really want a fully stripped out car with the rad in the boot and perspex widows? But then I know this will be I lot of fun when it’s done
After recently owning a mk3 focus rs it made me think do I really want a fully stripped out car with the rad in the boot and perspex widows? But then I know this will be I lot of fun when it’s done
#39