Sierra Cosworth with Compomotive TH2
14-01-2014, 05:53 PM
#1
I'm Finding My Feet Here Now
Thread Starter
Sierra Cosworth with Compomotive TH2
Heres some pictures of my Sierra Cosworth 2wd.
Hope you like it
Not much original stuff on it
427 bhp on the wheels
Fully spec of the car translated by google
Bottom part :
- 200 block plane milled and processed for long cylinder head bolts.
- CP pistons 7,6:1 .
- Cr 22mm piston pin .
- Auto Verdi longer connecting rods with ARP bolts .
- ACL Race Bearings with ARP bolted assault.
- All weighted / balanced .
- Cosworth oil pump with high pressure kit , 4 * 4 drive shaft to the oil pump.
- Modified crankcase ventilation system with steel braided hoses.
- Baffle plates on the oil pan .
- Vibra- Tech engine mounts.
- ARP Bolted flywheel.
- Cometic gaskets.
Cylinder head :
- Top vented by CNC Heads in England.
- Cometic MLS head gasket with loose rings around the cylinders.
- Double valve springs .
- Reduced valve spring wells.
- Valve guides in phosphor bronze manganese.
- BD16 intake cam .
- Pipercam adjustable cam gear .
Fuel:
- Coarse fuel rail in polished aluminum .
- 750cc Fuel injectors
- Bosch 044 fuel pump.
- Black anodised fuel filter AN8 .
- Black steel braided AN Hose to all fuel .
- Black AN8 Links with all fuel .
- Turbo Smart fuel pressure regulator.
Turbo :
- Garret GT30 R BB Tg racing spec ball bearing turbochargers.
- Stainless steel manifolds. (Peter G)
- Turbo damper .
- 3 " Moongose exhaust.
- 34 Actuator
- K & N air filter with 4 " taper
- Greddy Type- r relief valve .
- 100mm Intercooler from Airtec
Electronics :
- MaxxECU engine management system.
- 4 EGT sensor plugged into the ECU.
- Electronic solenoid valve for boost pressure control.
- 3- bar folder sensor.
- MSD 6AL Ignition with MSD Blaster coil.
- Magnecor 8.5mm ignition wires .
Miscellaneous:
- Pro Alloy Aluminiumlylare dual spalfläktar .
- Black Samco radiator hoses and turbo hoses.
- Aluminium conservator.
- Aluminum servo container.
- Battery in bagagen
- Castrol Edge 10W60 fst
- Mapped of Luntec
Drivetrain Powered by Quaife:
- Quaife straitcut gearset in Borg Warner T5 gearbox housing.
- B & M short shift.
- Sachs -765 pressure plate with AP Racing 6 puck sprung Sinter.
- Quaife 7.5 reardiff
Chassis
- Koni coilover gr-n struts.
- Asphalt touchdown from a rally sierra.
- Powerflex bushings in the front and rear suspension.
- Strut brace front and rear Sparco.
Brakes
- Alcon 355mm discs with bluebells
- WP-pro 6-piston calipers;
- Steel braided brake hoses.
- TAROX discs rear.
Interior
- Full leather interior.
- Flocked dashboard.
- Flocked door sides
- RSS Mokka steering wheel
- Sparco pedals.
- Racetec boost pressure gauge
- Racetec oil pressure gauge
- Racetec oil temperature gauge
- MaxxECU mdash
- Fire extinguisher.
Exterior / Styling
- Morett Quad Lights
- 4x4 hood
- 90 taillight
- White blinker
- Get Picked wipers to headlights.
- Carbon Cstolpe panels!
- Get Picked fog lamps, replaced with RS500 grid.
- RS 500 lip.
- Color custom door handles
- Carbon fiber Mirror
Hope you like it
Not much original stuff on it
427 bhp on the wheels
Fully spec of the car translated by google
Bottom part :
- 200 block plane milled and processed for long cylinder head bolts.
- CP pistons 7,6:1 .
- Cr 22mm piston pin .
- Auto Verdi longer connecting rods with ARP bolts .
- ACL Race Bearings with ARP bolted assault.
- All weighted / balanced .
- Cosworth oil pump with high pressure kit , 4 * 4 drive shaft to the oil pump.
- Modified crankcase ventilation system with steel braided hoses.
- Baffle plates on the oil pan .
- Vibra- Tech engine mounts.
- ARP Bolted flywheel.
- Cometic gaskets.
Cylinder head :
- Top vented by CNC Heads in England.
- Cometic MLS head gasket with loose rings around the cylinders.
- Double valve springs .
- Reduced valve spring wells.
- Valve guides in phosphor bronze manganese.
- BD16 intake cam .
- Pipercam adjustable cam gear .
Fuel:
- Coarse fuel rail in polished aluminum .
- 750cc Fuel injectors
- Bosch 044 fuel pump.
- Black anodised fuel filter AN8 .
- Black steel braided AN Hose to all fuel .
- Black AN8 Links with all fuel .
- Turbo Smart fuel pressure regulator.
Turbo :
- Garret GT30 R BB Tg racing spec ball bearing turbochargers.
- Stainless steel manifolds. (Peter G)
- Turbo damper .
- 3 " Moongose exhaust.
- 34 Actuator
- K & N air filter with 4 " taper
- Greddy Type- r relief valve .
- 100mm Intercooler from Airtec
Electronics :
- MaxxECU engine management system.
- 4 EGT sensor plugged into the ECU.
- Electronic solenoid valve for boost pressure control.
- 3- bar folder sensor.
- MSD 6AL Ignition with MSD Blaster coil.
- Magnecor 8.5mm ignition wires .
Miscellaneous:
- Pro Alloy Aluminiumlylare dual spalfläktar .
- Black Samco radiator hoses and turbo hoses.
- Aluminium conservator.
- Aluminum servo container.
- Battery in bagagen
- Castrol Edge 10W60 fst
- Mapped of Luntec
Drivetrain Powered by Quaife:
- Quaife straitcut gearset in Borg Warner T5 gearbox housing.
- B & M short shift.
- Sachs -765 pressure plate with AP Racing 6 puck sprung Sinter.
- Quaife 7.5 reardiff
Chassis
- Koni coilover gr-n struts.
- Asphalt touchdown from a rally sierra.
- Powerflex bushings in the front and rear suspension.
- Strut brace front and rear Sparco.
Brakes
- Alcon 355mm discs with bluebells
- WP-pro 6-piston calipers;
- Steel braided brake hoses.
- TAROX discs rear.
Interior
- Full leather interior.
- Flocked dashboard.
- Flocked door sides
- RSS Mokka steering wheel
- Sparco pedals.
- Racetec boost pressure gauge
- Racetec oil pressure gauge
- Racetec oil temperature gauge
- MaxxECU mdash
- Fire extinguisher.
Exterior / Styling
- Morett Quad Lights
- 4x4 hood
- 90 taillight
- White blinker
- Get Picked wipers to headlights.
- Carbon Cstolpe panels!
- Get Picked fog lamps, replaced with RS500 grid.
- RS 500 lip.
- Color custom door handles
- Carbon fiber Mirror
Last edited by klebbe; 14-01-2014 at 06:44 PM.
Trending Topics
14-01-2014, 06:43 PM
#11
I'm Finding My Feet Here Now
Thread Starter
14-01-2014, 07:07 PM
#15
I'm Finding My Feet Here Now
Thread Starter
Yes i hade an Mercury Grey for about eleven years. But i got tired of that setup witch rollercage, Momo chairs so i sold that in parts. This body is extreamly nice compared to the old one and i wanted a darker color
This is a car that is build for the street. A fast streetcar
This is a car that is build for the street. A fast streetcar
14-01-2014, 07:19 PM
#17
Advanced PassionFord User
WOW that looks stunning. credit to you fella.
14-01-2014, 08:14 PM
#21
I'm Finding My Feet Here Now
Thread Starter
The rims ar 8x18 and i have 215-35-18 tyres
14-01-2014, 08:30 PM
#22
PassionFord Post Whore!!
Looks great
Very nice mate
Very nice mate
14-01-2014, 10:11 PM
#29
Advanced PassionFord User
Beast!
14-01-2014, 11:13 PM
#31
Irregular Poster
