|
That is nice. Good work on the boa turbo.
Single turbo only? |
Jepp, singel turbo it is!
@ 1bar and with octan booster to compensate the 9.7.1 comp. it should end up around 450 hp. Just by geting a freeflow manifold/ intake and porting the heads gives a around 50hp increes! And 200hp gain with that turbo is no problem :) |
Good work Bensen :top:
|
:clap: very kool
|
love it, looking forward to seeing the results :king:
|
Wicked car,fair play.Am really interested in what fuel and intake system your going to be using as im doing a similar thing with my 24v xr4i,and undecided on what carbs,throttle bodies to use.
|
very cool mate!! :smokin:
what manifolds will you be using? |
Nice projekt mate ;-) liking the 24v turbo
|
Very very nice! :grin: That rear end will be overtaking the front on many occasions!! Sorted!!
|
V6 with Turbo that will sound sweet, love the old skool fords
|
Spank you everybody! :)
Fulesystem is a Bosh 044 pump, 3/8" inch braided hoses al the way with hydraulic cuplings. Standard fuleraila and 540cc injectros. If ur going for N/A tuning this is the shit my friends! :king: http://www.dtafast.co.uk/Throttle%20...worth%20V6.jpg http://www.dtafast.co.uk/Throttle%20...our_engine.htm website This alone will easyliy give 35-40 hp.. with headers, porterd and polish heads and better cams; The shit will hit the fan! ;) This engein has massive potensial! We ported the heads 10mm!! Cosworth were doing everyting for keeping the power down.. And som more pics of how ur suposed to ues a Capri :) http://www1.garaget.org/archive/3/25...5-122-6421.jpg http://www1.garaget.org/archive/3/25...-3561-4668.jpg http://www1.garaget.org/archive/3/25...-8895-1420.jpg |
Those ITBs look expensive! i would rather throw my money at a turbo than those! bet they sound good full chat though! Are you going to fabricate a manifold from stainless steel to match up with your turbo and exhaust ports? just i saw you have cleaned up the standard manifolds in your re-build pics ;-)
|
Nja, 42mm regular steel and wrap it.
When I started the re-bulid i was just gonna clean it up and fix the cain but the it got out of hand...hehe.. So thats why the manifolds were painted. |
As all these projekts do! Im doing 24v turbo myself, using cast manifolds, then joining them together with steel tubing ;-) what are the specs of your turbo?
|
Cool engine project :D
Love the car too :top: |
Wow thats well mint.Thats what i call a proper engine for a capri.
|
Borg Warner S200R
Comp.Wheel O.D: 3,14 Comp.Wheel inducer Dia: 56mm Turbine Wheel OD 2,92 Turbine Wheel Exducer 65mm Turbine A/R ,85 Think this will be a good turbo for the 24v.. The goal isent to max power but get a car that will be driveible but still scare the shit out of you! :grin: |
A clip from a few years back doing som 0-60 testing. 6,11 sec
http://www.youtube.com/watch?v=p059xTOyP4w |
Originally Posted by Bensen
(Post 5100073)
A clip from a few years back doing som 0-60 testing. 6,11 sec
http://www.youtube.com/watch?v=p059xTOyP4w cool video mate, sounds awsome |
Originally Posted by Bensen
(Post 5100011)
Borg Warner S200R
Comp.Wheel O.D: 3,14 Comp.Wheel inducer Dia: 56mm Turbine Wheel OD 2,92 Turbine Wheel Exducer 65mm Turbine A/R ,85 Think this will be a good turbo for the 24v.. The goal isent to max power but get a car that will be driveible but still scare the shit out of you! :grin: |
Any update mate?
|
Only just spotted this, looks ace :top:
|
very nice indeed :top:
never seen the innards of the standard BOA plenum. can see why they are restrictive now :cry: what power you expecteing from it? and any pics of what the new inlet manifold will look like? :respekt: |
1 Attachment(s)
these are what you want slide throttles from the fbe cosworth 24v
Attachment 171463 and this is what it sounds like http://www.youtube.com/watch?v=YDh_rywjt0U |
Thats a beauty mate, good luck with the project.
|
Air trumpets
Hi
Where have you got hold of theese trumpets? Or have you modified some others? Mike |
Trumpets
I have the slide throttle but want these trumpets instead of the long carbon one's.
Have you bought them or made them?
Originally Posted by phatfordxr4i
(Post 5128286)
these are what you want slide throttles from the fbe cosworth 24v
http://i214.photobucket.com/albums/c...i/DSC02861.jpg and this is what it sounds like http://www.youtube.com/watch?v=YDh_rywjt0U |
| All times are GMT. The time now is 08:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands