New Toy 24v Ford Sierra
#42
Turbocharging Technician
Join Date: Jul 2010
Location: Top secret. Mission:Imposible.
Posts: 3,557
Likes: 0
Received 0 Likes
on
0 Posts
nice car mate, is it back on the road? what injectors you using? like the hose kit, i take it is a hose kit specific for the 24v in a sierra.
#44
Turbocharging Technician
Join Date: Jul 2010
Location: Top secret. Mission:Imposible.
Posts: 3,557
Likes: 0
Received 0 Likes
on
0 Posts
cool, just standard injectors max out at around 210 bhp, what cc/min are the vaux ones? im looking for some bigger injectors just now myself, need 320cc/min or more for 350 bhp and high impedance, difficult to find six, always in fours!
#49
Turbocharging Technician
Join Date: Jul 2010
Location: Top secret. Mission:Imposible.
Posts: 3,557
Likes: 0
Received 0 Likes
on
0 Posts
I picked up 6 c20 let injectors tonight (306cc/min) these will give enough fuel for 350+ bhp, vectra v6 ones are too small, 220 bhp max, thanks for the advice tho and keep up the good work.
#51
#53
Turbocharging Technician
Join Date: Jul 2010
Location: Top secret. Mission:Imposible.
Posts: 3,557
Likes: 0
Received 0 Likes
on
0 Posts
#55
Turbocharging Technician
Join Date: Jul 2010
Location: Top secret. Mission:Imposible.
Posts: 3,557
Likes: 0
Received 0 Likes
on
0 Posts
there is no way you would ever modify an end feed rail to convert to side feed, prehaps he had a BOB engine that uses side feeds and modified the rail for subaru injectors? ive done that, involves drilling it deeper and bigger. Anyone with an end feed rail will just use end feeds, why re-invent the wheel?
Thread
Thread Starter
Forum
Replies
Last Post
Jack and the Beanstalk
Ford Sierra/Sapphire/RS500 Cosworth
8
15-08-2015 04:27 PM
Jack and the Beanstalk
Ford Sierra/Sapphire/RS500 Cosworth
2
09-08-2015 07:03 PM