XE engine for sale, (poss for mk1/mk2 escort conversion)
#1
XE engine for sale, (poss for mk1/mk2 escort conversion)
Although I have mentioned it would be suitable for mk1/2 escort use, please bear in mind that it is currently in a FWD car still so would need different sump and exhaust manifold or these ones modifying if you want to run it in a rwd car.
XE engine with 285 cams on bike bodies
3,000 miles old 285 piper BILLET cams (these are 500 quid a pair)
Steel rods, pocketed early XE (forged/pressure cast) XE pistons recent set of rings and stem seals but still manages the usual XE puff of smoke if you back off at very high rpm, pulls like a train all over the rev range, can be test driven in the car. (not a coscast head but no porous issues)
ARP rod bolts
ARP head studs
All new gaskets and seals etc during rebuild
8v baffle plate
3 options:
Bare engine - 550
(this is based on the secondhand value of the rods and cams and head studs basically so you get the all the standard bits free)
Engine with cams and bike throttle bodies and management (james murray megasquirt, adapted to fit standard loom but the adaptor could do with tidying up TBH) - 850
As above but also with the ashley exhaust manifold (small dent in one pipe to give clearance on the ARB) - 975
Bike bodies (gixxer ones IIRC, whatever they are it works great!) on what I am told is a bogg brothers manifold (I got with car so dont know history) and management seperately - 400
ashley exhaust manifold - 175
Bike bodies and inlet manifold without management - 275
Megasquirt on its own - 200
Pics from the engine freshen up last year showing it was all genuine parts used and proving the pistons are pocketed etc:
XE engine with 285 cams on bike bodies
3,000 miles old 285 piper BILLET cams (these are 500 quid a pair)
Steel rods, pocketed early XE (forged/pressure cast) XE pistons recent set of rings and stem seals but still manages the usual XE puff of smoke if you back off at very high rpm, pulls like a train all over the rev range, can be test driven in the car. (not a coscast head but no porous issues)
ARP rod bolts
ARP head studs
All new gaskets and seals etc during rebuild
8v baffle plate
3 options:
Bare engine - 550
(this is based on the secondhand value of the rods and cams and head studs basically so you get the all the standard bits free)
Engine with cams and bike throttle bodies and management (james murray megasquirt, adapted to fit standard loom but the adaptor could do with tidying up TBH) - 850
As above but also with the ashley exhaust manifold (small dent in one pipe to give clearance on the ARB) - 975
Bike bodies (gixxer ones IIRC, whatever they are it works great!) on what I am told is a bogg brothers manifold (I got with car so dont know history) and management seperately - 400
ashley exhaust manifold - 175
Bike bodies and inlet manifold without management - 275
Megasquirt on its own - 200
Pics from the engine freshen up last year showing it was all genuine parts used and proving the pistons are pocketed etc:
#2
PS
Am breaking whole car if anyone on here into vauxhalls wants any other bits from it:
http://www.vauxhall-sport-forum.com/...ne-t17230.html
Am breaking whole car if anyone on here into vauxhalls wants any other bits from it:
http://www.vauxhall-sport-forum.com/...ne-t17230.html
#3
Too many posts.. I need a life!!
chip if mark could get someone to fit it to our mk3 escort and get a buyer for our big spec steel cvh set up he would proberly have this....
can you still get bell housing to use ford gearboxes and what clutch would be needed.
and how hard would the mount for the engine be?
can you still get bell housing to use ford gearboxes and what clutch would be needed.
and how hard would the mount for the engine be?
#4
You can get a bellhousing for rwd boxes but I have no idea about for a fwd escort, not something I have ever looked into, would have thought using the vauxhall box too would make more sense.
TBH though, better off just going zetec turbo in a mk3 escort surely?
TBH though, better off just going zetec turbo in a mk3 escort surely?
#7
Too many posts.. I need a life!!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rog
Cars for Sale
25
04-09-2015 12:10 PM