Non Ford parts & other stuff for sale If its not for a Ford, or even not car part... this is the room to sell it!! Starting a topic requires you to have purchased a gold membership.

!!! SOLD !!! Twin 40DCOE Carburettors Kit !!!SOLD!!!

Thread Tools
 
Search this Thread
 
Old 21-08-2007, 05:53 PM
  #1  
STEVENMTE
Virgin
Thread Starter
 
STEVENMTE's Avatar
 
Join Date: Aug 2007
Location: Woodbridge, Suffolk In East Anglia
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default !!! SOLD !!! Twin 40DCOE Carburettors Kit !!!SOLD!!!

Weber Twin 40 DCOE
Carburettor Kit
For Ford CVH - 1600 cc

This Is a used set of Weber Twin 40 DCOE 27 Carburettor Kit which I used to run my 1989 Ford Fiesta MkII Xr2 to great effect. The engine was in a mild state of tune before the application of these carburettors. Once these were fitted it took the engine to heights which I didn’t think possible!!
Unfortunately my Xr2 has since succumbed to the dreaded rot! And is no longer with me. I ran the carbs on a 1.6 escort for a little while for a bit of fun and then sold that. I retained the carburettors for a year because a friend was interested in running them on his kit car, but this idea has fizzled out.
Hence I have made the decision to sell these great carburettors as a direct fit kit to any Ford CVH 1600cc engine or alternately just for the two good bits.
The carburettors are in perfect working order, had them filled on the bench today with fuel and checked that all the veins were clean and that the accelerator jets were working fine. I also has many spare jets, rams etc included in this deal so that perfect set-up can be achieved for your engine! Now I’m just hoping for a sensible person to come along and realise what a great deal this package is, And the new level it will take their engine to. These Carbs are truly very special products.
Here’s the inventory for the Twin 40’s and spares:

Twin 40 Carburettor Kit:
Manifold: 57mm length to fit Ford CVH 1600 cc engine + Misab Plates
Extras: Servo pickup fitted to manifold + Twin Throttle Cable Ready!
Fuel pump blank plate + Fuel Supply Rail To Both Carbs
Chokes: 34 mm - Venturis: 4.0
Main Jet: 135 - Air Correct: 180
Idle Jet: 45 F11 - Pump Jet: 35
Emulsion: F16 - Discharge: 60
Needle: 175 - Rams:16mm Ext
Filters: Pipercross Socks x 4
Desired Camshaft : Standard Or Mild Road Cam - Nice & Torquey

Spares Package:
Chokes: 30 - Venturis: 4.5
Main Jet: 117 + 125 - Air Correct:160 + 200
Idle Jet: 40 F9 + 45 F4 + 50 F9 + 50 F14
Pump Jet: 40 + 45 - Rams: 16 mm Bolt Fixing

Any Questions please contact me on the following numbers:
Steven Daytime: 01394 386614
Evening: 01394 460924
Mobile: 07887814872
Email: STEVENANDSALLY@mayhew820.freeserve.co.uk
I'm Looking For £350 people, and this will include a 1 - 2 Day Insured against damage DHL delivery!! This kit is worth every penny! And is ready to go once bolted onto the cylinder head and the float chambers filled. The only other accessory you would require is an electric fuel pump. Which you can obtain from Burton performance or Demon Tweeks






[/b]
Sold for £320. Thanks to all who viewed
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
abz474
Cars for Sale
9
01-11-2015 06:53 PM



Quick Reply: !!! SOLD !!! Twin 40DCOE Carburettors Kit !!!SOLD!!!



All times are GMT. The time now is 06:49 PM.