Going to the Rolling Road today.
21-10-2005, 08:04 AM
#1
Going to the Rolling Road today.
Off to the rollers to see what the ole girl can do 
Changed the exhaust from a .48 to a .55, just hope the power hangs on a bit longer top end
Don't think i will get anymore power
A Big Thanks to Zoo for a Brill Service suppling the housing
Any guesses as to power and torque
Steve.
Changed the exhaust from a .48 to a .55, just hope the power hangs on a bit longer top end
Don't think i will get anymore power
A Big Thanks to Zoo for a Brill Service suppling the housing
Any guesses as to power and torque
Steve.
Trending Topics
21-10-2005, 09:34 AM
#12
Originally Posted by Spiky
did you have the map changed for the bigger housing???
with that spec i'd say about 331 bhp
with that spec i'd say about 331 bhp
Only fitted the housing on wednesday
Steve.
PS hope to get a lot more than 331bhp
21-10-2005, 07:00 PM
#15
Well i have been
Lost power and torque upto 4500rpm
Only gained about 5bhp and 5lbft above this
Not worth the effort
Not quite what i was expecting
thought i would gain more at the top end ie power and torque hanging on longer
Steve.
Lost power and torque upto 4500rpm
Only gained about 5bhp and 5lbft above this
Not worth the effort
Not quite what i was expecting
thought i would gain more at the top end ie power and torque hanging on longer Steve.
21-10-2005, 07:53 PM
#22
Too many posts.. I need a life!!
Join Date: Jun 2004
Location: Essex
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
Hi mate,ive just taken my 48 housing off and fitted a 63 housing,havnt driven it yet though,so dont know what to expect 
How does it drive compared to the 48?
How does it drive compared to the 48?
21-10-2005, 10:40 PM
#24
Originally Posted by kevmk2
Hi mate,ive just taken my 48 housing off and fitted a 63 housing,havnt driven it yet though,so dont know what to expect
How does it drive compared to the 48?
How does it drive compared to the 48?
Steve.
22-10-2005, 06:09 PM
#26
Too many posts.. I need a life!!
Join Date: Jun 2004
Location: Essex
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
Well i went out for a test drive today after fitting the .63 housing and all i can say is It pulls so much harder than before,all through each gear,spinning up in 3rd and a bit of 4th too 
I had to turn the boost down too,it went upto 2.3 bar at one point Back down to 1.9 now,what it was dynoed at. Just need to fit a boss for the lambda sensor and then get it mapped on the rollers again 
It pulls so much harder than before,all through each gear,spinning up in 3rd and a bit of 4th too I had to turn the boost down too,it went upto 2.3 bar at one point Back down to 1.9 now,what it was dynoed at. Just need to fit a boss for the lambda sensor and then get it mapped on the rollers again
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM