Sapphire door weather strip
#1
Part of the Furniture
Thread Starter
Join Date: Nov 2009
Location: Tunbridge wells Kent
Posts: 176
Likes: 0
Received 16 Likes
on
15 Posts
Sapphire door weather strip
Hi Guys
I'm in the middle of fitting up my K plate saff after a very long rebuild
I'm fitting the door glass outer weather strips ,I bought new front ones some time ago so there good.
My osr one is in very poor condition and as they are no longer available I was
thinking could I cut and reshape a new nsf one to fit .
anyone else tried this with sucsess.
Cheers Tim
I'm in the middle of fitting up my K plate saff after a very long rebuild
I'm fitting the door glass outer weather strips ,I bought new front ones some time ago so there good.
My osr one is in very poor condition and as they are no longer available I was
thinking could I cut and reshape a new nsf one to fit .
anyone else tried this with sucsess.
Cheers Tim
#2
Too many posts.. I need a life!!
im about to do sumut simliar im going to put them in boiling water or oil which evers hotter put some flat plate inside and hammer them into shape with a rubber hammer