Anyone used transit parts uk from ebay?? DONT USE!!!!
#1
PassionFord Post Troll
Thread Starter
iTrader: (1)
Join Date: May 2003
Location: SHEFFIELD
Posts: 2,839
Likes: 0
Received 0 Likes
on
0 Posts
Anyone used transit parts uk from ebay?? DONT USE!!!!
as above, having problems with them selling poor quality stuff then making excuses
Last edited by IANS2RST; 22-11-2012 at 03:56 PM.
#4
Advanced PassionFord User
It's cheap stuff so its not going to last forever. Had a couple of propshaft bearings off them over the years. One of which only lasted a couple of months but they didn't want to know,said it probably wasn't fitted right ,blah blah.
#5
Too many posts.. I need a life!!
some of there stuff us real cheap tat, some of it ok, they have a attitude problem and have had for the last year or two too big for there boots, shame they were really good once, depends on what your buying, if its chain kits and other indepth stuff ford all the way
Trending Topics
#22
just finding my feet
Ps: he unit has just had a fire so bear withnthem if they are a little slow at the min
Oh and ford have reduced the price of dual mass flywheel conversion kids and retail at around 270 plus vat now complete so remember that when buying pattern kits
Oh and ford have reduced the price of dual mass flywheel conversion kids and retail at around 270 plus vat now complete so remember that when buying pattern kits
#23
just finding my feet
#27
Welsh And Proud
Join Date: Jan 2009
Location: Swansea,Wales
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts
after reading this thread and my own dealing with them i fo have some advice for anyone wanting to buy from them
DONT!
Just glad there's no engine damage,or there would of been big trouble.
For the sake of Ł13 difference in price to a genuine part I have learnt my lesson
DONT!
Just glad there's no engine damage,or there would of been big trouble.
For the sake of Ł13 difference in price to a genuine part I have learnt my lesson
#29
Wahay!! I've lost my Virginity!!
Join Date: Sep 2012
Location: kirkintilloch
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
mate i used thenm for prop bearings on my transit recovery and used 6 in 2 weeks,they just kept breaking and they wouldnt replace them.ended payin and gettin genuine ford ones,guys a knob and his phone always goes to ansa machine or engaged for days on end
#34
PassionFord Post Whore!!
I can confirm there parts are shite
I have a 2004 tdci mondy with the usual pully rattle, bought a new one in november last year, just got round to getting it done today at mates garage, part looked great........... started car and fuckin hell it was 100 times worse than the original one which now sounds fuckin mint compared lol, the pully was rattling and vibrating that bad it couldnt be left on as it was seriously throwing the belt about and it would just burst the belt so had to go through same process again, removing the engine mount and letting the engine drop down to access the bastard thing in the wheel arch...... lesson learnt dont buy just because its a third of the price.
Actually looking more into it other pattern parts from companys aint that much cheaper than a gen ford one so fuck it, ill hang off and buy the ford kit that supplies the tensioner and belt aswell as pully, it might be exspensive but its getting to the stage you just cant trust other companys, there is other suppliers on ebay selling full kits on ebay and they only state its a gates belt or similar brand we all know and trust......... shame they dont tell you what make the pullys or tensioners is like skf etc, they dont say cos its cheap pish.
Even my mate said fuckin hell it could have at least last 2 months before it done that being cheap, you dont expect it to do it straight away and sound fuckin awfull.
I have a 2004 tdci mondy with the usual pully rattle, bought a new one in november last year, just got round to getting it done today at mates garage, part looked great........... started car and fuckin hell it was 100 times worse than the original one which now sounds fuckin mint compared lol, the pully was rattling and vibrating that bad it couldnt be left on as it was seriously throwing the belt about and it would just burst the belt so had to go through same process again, removing the engine mount and letting the engine drop down to access the bastard thing in the wheel arch...... lesson learnt dont buy just because its a third of the price.
Actually looking more into it other pattern parts from companys aint that much cheaper than a gen ford one so fuck it, ill hang off and buy the ford kit that supplies the tensioner and belt aswell as pully, it might be exspensive but its getting to the stage you just cant trust other companys, there is other suppliers on ebay selling full kits on ebay and they only state its a gates belt or similar brand we all know and trust......... shame they dont tell you what make the pullys or tensioners is like skf etc, they dont say cos its cheap pish.
Even my mate said fuckin hell it could have at least last 2 months before it done that being cheap, you dont expect it to do it straight away and sound fuckin awfull.
#36
Can anyone help?
Hi All.
Recent bought an engine from this company and having major problems. Cost me Ł4k!!!!!!!
Ive had the same, "Rob in the warehouse" "Rob out of the office", Ive even had "Rob in China". Rob certainly is never at Transit Parts.
I intend to take it further and wondered whether any one can help in sharing their problems with them? if so, drop us a quick reply.
This company needs stopping. There are endless people having problems with them.
Thanks in advance to all those that will reply
Recent bought an engine from this company and having major problems. Cost me Ł4k!!!!!!!
Ive had the same, "Rob in the warehouse" "Rob out of the office", Ive even had "Rob in China". Rob certainly is never at Transit Parts.
I intend to take it further and wondered whether any one can help in sharing their problems with them? if so, drop us a quick reply.
This company needs stopping. There are endless people having problems with them.
Thanks in advance to all those that will reply
#39
transit Parts uk
currently trying to establish why they have sold me 'brand new ' DENSO injectors , when they have etching on them suggesting they have been processed and recon'd . lasted just over 12 months and nearly all dead now.
: angry:
I have contacted them and await their reply. Mean while where do i get brand new DENSO injectors from ???
:b anana:
and i could mention the 'Brand New' EGR i purchased which blew up within 48 hours and they gave me a full refund
: angry:
I have contacted them and await their reply. Mean while where do i get brand new DENSO injectors from ???
:b anana:
and i could mention the 'Brand New' EGR i purchased which blew up within 48 hours and they gave me a full refund
Thread
Thread Starter
Forum
Replies
Last Post
arch, battlesbridge, car, ebay, erfahrung, essex, ford, parts, quality, replacement, sheffield, transit, transitpartsuk, uk, wheel