General Car Related Discussion. To discuss anything that is related to cars and automotive technology that doesnt naturally fit into another forum catagory.

omex 600 managment and ford motorsport air/fuel ratio guage HELP !!!

Thread Tools
 
Search this Thread
 
Old 23-04-2011, 07:33 PM
  #1  
Rst tyrone
zetec turbo
Thread Starter
iTrader: (4)
 
Rst tyrone's Avatar
 
Join Date: Apr 2011
Location: Birmingham
Posts: 1,287
Received 24 Likes on 24 Posts
Default omex 600 managment and ford motorsport air/fuel ratio guage HELP !!!

hi all need some help on this on please, fitted a new clutch today on my s2 zetec turbo but the battery has been disconnected for almost 2 weeks and now when driving the air/fuel guage is going crazy and im wondering if the omex 600 has lost it's map ??? took it for a good blast and seems to be running ok but im not to clued on this any help would be appreciated
Old 23-04-2011, 07:35 PM
  #2  
Dlatch!
I've found that life I needed.. It's HERE!!
 
Dlatch!'s Avatar
 
Join Date: May 2004
Location: chorleywood
Posts: 1,083
Likes: 0
Received 1 Like on 1 Post
Default

should not have lost its map.

what wideband kit you using for the afr guage?
Old 23-04-2011, 07:37 PM
  #3  
jaiscossie
PassionFord Post Whore!!
 
jaiscossie's Avatar
 
Join Date: May 2004
Location: Down south!
Posts: 4,155
Received 21 Likes on 15 Posts
Default

The omex wont of lost its map, mine has been disconnected for nearly 6 months without a problem.Have you checked for air leaks etc?
Old 23-04-2011, 07:40 PM
  #4  
Rst tyrone
zetec turbo
Thread Starter
iTrader: (4)
 
Rst tyrone's Avatar
 
Join Date: Apr 2011
Location: Birmingham
Posts: 1,287
Received 24 Likes on 24 Posts
Default

cant find any air leaks and not sure what wideband its running as ive only had the car 2 weeks is there away to calibrate the guage ???
Old 23-04-2011, 07:45 PM
  #5  
Big Will_
Borg Warner EFR Equipped!
 
Big Will_'s Avatar
 
Join Date: Apr 2005
Location: In the unit, building a 450bhp Time Attack Focus!
Posts: 5,810
Likes: 0
Received 2 Likes on 2 Posts
Default

Did you take the flywheel off? If so, it's possible that when you've put it back on, the missing tooth on the rear of the flywheel is now in a different place and the offset in the ECU from where it reads the tooth is now incorrect.
Old 23-04-2011, 07:46 PM
  #6  
Rst tyrone
zetec turbo
Thread Starter
iTrader: (4)
 
Rst tyrone's Avatar
 
Join Date: Apr 2011
Location: Birmingham
Posts: 1,287
Received 24 Likes on 24 Posts
Default

i did remove the flywheel but it only goes back on way as the bolt holes are staggered so to speak
Old 23-04-2011, 08:51 PM
  #7  
Rst tyrone
zetec turbo
Thread Starter
iTrader: (4)
 
Rst tyrone's Avatar
 
Join Date: Apr 2011
Location: Birmingham
Posts: 1,287
Received 24 Likes on 24 Posts
Default

might just get the map/fuelling checked anyone know where in birmingham i can get this done ??

cheers
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jay030787
Ford Escort RS Turbo
27
18-09-2015 07:34 PM
allye
Alloy wheels and ICE for sale
1
11-08-2015 09:49 PM
turbobill
Technical help Q & A
3
09-08-2015 05:21 PM



Quick Reply: omex 600 managment and ford motorsport air/fuel ratio guage HELP !!!



All times are GMT. The time now is 07:38 AM.