F.A.O. ALL "MADETTES"
#81
no immy get it right
it was mapped to 8600 but karl said turn it down to 8200
i did donington and silverstone at 8600 all day long no problems
i changed the folowers before the next track day still not had my solids turn up
so karl said dont go out there again but i pay me cash for track day so went out there
bang shit happens
i dont know why i have to explane to you my dealings i dont like the way u have a dig at karl after all the help he did for you
and if ya trying to have a dig at my engine take alook at your own efforts which your machine shop built not you
no wonder your cash aint good enuf for any of us lot u bit the hand that feeds you
it was mapped to 8600 but karl said turn it down to 8200
i did donington and silverstone at 8600 all day long no problems
i changed the folowers before the next track day still not had my solids turn up
so karl said dont go out there again but i pay me cash for track day so went out there
bang shit happens
i dont know why i have to explane to you my dealings i dont like the way u have a dig at karl after all the help he did for you
and if ya trying to have a dig at my engine take alook at your own efforts which your machine shop built not you
no wonder your cash aint good enuf for any of us lot u bit the hand that feeds you
#84
PassionFord Post Whore!!
Join Date: Aug 2004
Location: Kent
Posts: 4,364
Likes: 0
Received 0 Likes
on
0 Posts
Broomy/Hadland...why would i want to use you for parts? I'd rather set fire to my cash than spend it with you lot!
BTW no dig to karl but its he who sets the limits and you already said you cant use a computer ...My only concern is for the S8 and wether it works properly...but this is not my concern anymore
I must be fooking MAD to have ever supplied you people parts.... All i got was taken the wrong way...although in a way i am glad as it shows what tossers are in the Ford game.
BTW no dig to karl but its he who sets the limits and you already said you cant use a computer ...My only concern is for the S8 and wether it works properly...but this is not my concern anymore
I must be fooking MAD to have ever supplied you people parts.... All i got was taken the wrong way...although in a way i am glad as it shows what tossers are in the Ford game.
#85
err immy you begged sean for creidt on fuel pump n filters and he told you rightly to fuk off go else where
and you wanted to buy stuff off martoon aswell
so if you dint wana buy off us them why ring or pm in the 1st place
and you wanted to buy stuff off martoon aswell
so if you dint wana buy off us them why ring or pm in the 1st place
#88
PassionFord Post Troll
iTrader: (1)
Join Date: May 2003
Posts: 2,879
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SECS
sunny,.
For you information,
I only build/supply electronics, I do NOT map or build engines and this IS stated on my website. I have never claimed otherwise.
FACT: Cars were going fast way before ecu's were even invented and a car
does not go faster just because it has a particular ecu brand fitted.
For you information,
I only build/supply electronics, I do NOT map or build engines and this IS stated on my website. I have never claimed otherwise.
FACT: Cars were going fast way before ecu's were even invented and a car
does not go faster just because it has a particular ecu brand fitted.
You talk about being victimised....every time anyone says AUTRONIC you get an instant stiffy and get all paraniod that your business is going under.....why you so paraniod man, especially 99% of the time you got sod all to do with the discussion? Besides Mark's sent a back dated cheque....are you still going to behave in the same paranoid manner? I had nothing against you from day one and still don't as I can't be asked but you do bring it all on yourself mate.
Phil - Matt has nothing to prove as we all believe his 2bar+ monster produces a monsterous 300bhp (well it should do anyway).
#89
............
Originally Posted by Bosch Man
I must be fooking MAD to have ever supplied you people parts.... All i got was taken the wrong way....
#90
PassionFord Post Whore!!
Join Date: Aug 2004
Location: Kent
Posts: 4,364
Likes: 0
Received 0 Likes
on
0 Posts
Broomy.....the facts....
I phoned Hadland about 4 weeks ago as told by Rainbird to as he did the link pipe.....and i thought he was the only one (so had too,and he wouldnt have stiffed me as i would have got Rainbird to sort it and unless heshits on his mates i was safe)...soon ditched that idea when i found an alternative for a proper factory look one from PJ Motorsport
At the time i PM'd Sean i wasnt sure if he would stiff me..as you see,i was right to suspect him and NOT send cash upfront...thanks for the conformation Broomy ...So my comment stands i'd rather set light to my cash they give it to any of you people.
I phoned Hadland about 4 weeks ago as told by Rainbird to as he did the link pipe.....and i thought he was the only one (so had too,and he wouldnt have stiffed me as i would have got Rainbird to sort it and unless heshits on his mates i was safe)...soon ditched that idea when i found an alternative for a proper factory look one from PJ Motorsport
At the time i PM'd Sean i wasnt sure if he would stiff me..as you see,i was right to suspect him and NOT send cash upfront...thanks for the conformation Broomy ...So my comment stands i'd rather set light to my cash they give it to any of you people.
#91
1st to 200 without NOS
iTrader: (2)
Originally Posted by Bosch Man
Broomy.....the facts....
I phoned Hadland about 4 weeks ago as told by Rainbird to as he did the link pipe.....and i thought he was the only one (so had too,and he wouldnt have stiffed me as i would have got Rainbird to sort it and unless heshits on his mates i was safe)...soon ditched that idea when i found an alternative for a proper factory look one from PJ Motorsport
At the time i PM'd Sean i wasnt sure if he would stiff me..as you see,i was right to suspect him and NOT send cash upfront...thanks for the conformation Broomy ...So my comment stands i'd rather set light to my cash they give it to any of you people.
I phoned Hadland about 4 weeks ago as told by Rainbird to as he did the link pipe.....and i thought he was the only one (so had too,and he wouldnt have stiffed me as i would have got Rainbird to sort it and unless heshits on his mates i was safe)...soon ditched that idea when i found an alternative for a proper factory look one from PJ Motorsport
At the time i PM'd Sean i wasnt sure if he would stiff me..as you see,i was right to suspect him and NOT send cash upfront...thanks for the conformation Broomy ...So my comment stands i'd rather set light to my cash they give it to any of you people.
#92
Too many posts.. I need a life!!
Join Date: Jun 2003
Location: Australia
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
gearboxman,
hi bernie.. trying to stay up as long as poss. Start work tommorow at 10pm.. REMEMBER crime doesn't sleep!!!
PM/email me re: CWP!
now... back to the handbag swinging !
hi bernie.. trying to stay up as long as poss. Start work tommorow at 10pm.. REMEMBER crime doesn't sleep!!!
PM/email me re: CWP!
now... back to the handbag swinging !
#93
PassionFord Post Whore!!
Join Date: Aug 2004
Location: Kent
Posts: 4,364
Likes: 0
Received 0 Likes
on
0 Posts
When it comes to business i wont shit on people.....as you should learn martin
No matter what i think of someone business is business.......
cant be spent here either!! (because i would probably keep your cash and not send the goods!!)
#94
I've found that life I needed.. It's HERE!!
Join Date: Jun 2003
Location: Building a gearbox in Markyate
Posts: 1,314
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Vic
gearboxman,
hi bernie.. trying to stay up as long as poss. Start work tommorow at 10pm.. REMEMBER crime doesn't sleep!!!
PM/email me re: CWP!
now... back to the handbag swinging !
hi bernie.. trying to stay up as long as poss. Start work tommorow at 10pm.. REMEMBER crime doesn't sleep!!!
PM/email me re: CWP!
now... back to the handbag swinging !
Surprised Tiff isn't here
#95
1st to 200 without NOS
iTrader: (2)
Originally Posted by Bosch Man
When it comes to business i wont shit on people.....as you should learn martin
No matter what i think of someone business is business.......
cant be spent here either!! (because i would probably keep your cash and not send the goods!!)
#96
PassionFord Post Whore!!
Join Date: May 2003
Location: Doncaster
Posts: 5,143
Likes: 0
Received 0 Likes
on
0 Posts
theres a thread with people arguing about ecu's!!! who'd have thought the owner of the mean green bhoyed up machine would be spouting his usual blinkered horseshit
#97
PassionFord Post Whore!!
Join Date: Aug 2004
Location: Kent
Posts: 4,364
Likes: 0
Received 0 Likes
on
0 Posts
Martin...i dont know wether he would as he is asscosiated with you who claims would stiff me...and that aint the first time you said that!!!
Incidentally when have i ever had a go to anyone about your skills/business? Remember this all started over me asking what happened to Car 57 A genuine question out of interest taken asthough i was a fooking ambulance chaser
You gotta understand i deal with MANY people...so why do i only have a pop at a very few?...Maybe i feel justified ...SECS for example i sold out and spending far more money..like i just chuck money away Karl...gave him a pump and then no customer back up Yeah i fooking evil gobshite Truth sometimes hurts guys
Incidentally when have i ever had a go to anyone about your skills/business? Remember this all started over me asking what happened to Car 57 A genuine question out of interest taken asthough i was a fooking ambulance chaser
You gotta understand i deal with MANY people...so why do i only have a pop at a very few?...Maybe i feel justified ...SECS for example i sold out and spending far more money..like i just chuck money away Karl...gave him a pump and then no customer back up Yeah i fooking evil gobshite Truth sometimes hurts guys
#98
immy u have a true talent
of turning things round to siut you
martin refuses to take ya cash so u go 2nd best after u carnt get the part u want
sean refuses to send a pump without cash up front just like u do when i sell injectors card details over the fone or no products
so becuse sean wont send it you decide u dont want it
lets see you go to areomotive and get them to send with out with out payment
i dont think so
most products if not in stock need paying for before ordering let alone sending it out
you are a star immy
we proud of you your more twisted than a wrought iron gate
of turning things round to siut you
martin refuses to take ya cash so u go 2nd best after u carnt get the part u want
sean refuses to send a pump without cash up front just like u do when i sell injectors card details over the fone or no products
so becuse sean wont send it you decide u dont want it
lets see you go to areomotive and get them to send with out with out payment
i dont think so
most products if not in stock need paying for before ordering let alone sending it out
you are a star immy
we proud of you your more twisted than a wrought iron gate
#100
PassionFord Post Whore!!
Join Date: Aug 2004
Location: Kent
Posts: 4,364
Likes: 0
Received 0 Likes
on
0 Posts
How can the PJ factory fit item be any less efficient!...I chose that cause it didnt need sending off plus i was concerned to possible restriction on the Reyland one so thought lets try this instead....If i'd wanted the Reyland one which incidentally was more expensive as i get trade discount from people i supply!,i would have got Rainbird to sort it.
Yes payment up front for Bosch parts as it is my Dads company and he dont know anyone like i do..thats why i cant offer credit to everyone although some i do like Rainbird for example if needed
Oh and to get the aeromotive pump...i just see Mike who gives me credit
It all comes down to trust Broomy...and some i dont..especially when there mates say theyed stiff me.
Yes payment up front for Bosch parts as it is my Dads company and he dont know anyone like i do..thats why i cant offer credit to everyone although some i do like Rainbird for example if needed
Oh and to get the aeromotive pump...i just see Mike who gives me credit
It all comes down to trust Broomy...and some i dont..especially when there mates say theyed stiff me.
#101
PassionFord Post Whore!!
Join Date: Jul 2004
Location: Wiltshire, Bath, chippenham area!
Posts: 7,428
Likes: 0
Received 4 Likes
on
4 Posts
Originally Posted by Bosch Man
Broomy/Hadland...why would i want to use you for parts?
thing is mate
from a bystanders point of view..
I seen the reyland cos, and Broms 3dr on the track, and they were
quite clearly the best thing out there..
so they clearly have 'the minerals'
thats prolly why
#102
PassionFord Post Whore!!
Join Date: Aug 2004
Location: Kent
Posts: 4,364
Likes: 0
Received 0 Likes
on
0 Posts
cant be spent here either!! (because i would probably keep your cash and not send the goods!!)
Eh about 10 mins ago on that reply? ...oh and a time not so long ago...cant be bothered to find it as this lastest reply is enuff for me
#103
Too many posts.. I need a life!!
Join Date: May 2004
Location: On your IPC$
Posts: 695
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by martin-reyland
Originally Posted by Bosch Man
Broomy.....the facts....
I phoned Hadland about 4 weeks ago as told by Rainbird to as he did the link pipe.....and i thought he was the only one (so had too,and he wouldnt have stiffed me as i would have got Rainbird to sort it and unless heshits on his mates i was safe)...soon ditched that idea when i found an alternative for a proper factory look one from PJ Motorsport
At the time i PM'd Sean i wasnt sure if he would stiff me..as you see,i was right to suspect him and NOT send cash upfront...thanks for the conformation Broomy ...So my comment stands i'd rather set light to my cash they give it to any of you people.
I phoned Hadland about 4 weeks ago as told by Rainbird to as he did the link pipe.....and i thought he was the only one (so had too,and he wouldnt have stiffed me as i would have got Rainbird to sort it and unless heshits on his mates i was safe)...soon ditched that idea when i found an alternative for a proper factory look one from PJ Motorsport
At the time i PM'd Sean i wasnt sure if he would stiff me..as you see,i was right to suspect him and NOT send cash upfront...thanks for the conformation Broomy ...So my comment stands i'd rather set light to my cash they give it to any of you people.
Because of all this mistrust between each of you...
I got the change to buy the pump and the filters to go with it for a nice price ...
please go on .. I need more parts to finish my car
#104
Originally Posted by Bosch Man
How can the PJ factory fit item be any less efficient
I have no idea how it all works, but people in the know have said it might not work too well.
#107
How can the PJ factory fit item be any less efficient!...I chose that cause it didnt need sending off plus i was concerned to possible restriction on the Reyland one so thought lets try this instead....If i'd wanted the Reyland one which incidentally was more expensive as i get trade discount from people i supply!,i would have got Rainbird to sort it.
immy you get what you pay for i have lookin into manifold and designs for about a yr as i wana do one my self that will not crack
the modded 2wd is the best out there bar a one off manifold
now it not the time to descuss manifold design as its the wrong post but post in the techinal room and i will explane
immy you get what you pay for i have lookin into manifold and designs for about a yr as i wana do one my self that will not crack
the modded 2wd is the best out there bar a one off manifold
now it not the time to descuss manifold design as its the wrong post but post in the techinal room and i will explane
#108
PassionFord Post Whore!!
Join Date: Aug 2004
Location: Kent
Posts: 4,364
Likes: 0
Received 0 Likes
on
0 Posts
Pon....i know nothing about this kinda thing YET...external wastegate is all greek to me...I have however appointed a pro to make sure the link pipe is suitable for my desire ..So dont you go worrying yourself
#109
1st to 200 without NOS
iTrader: (2)
Originally Posted by Bosch Man
cant be spent here either!! (because i would probably keep your cash and not send the goods!!)
Eh about 10 mins ago on that reply? ...oh and a time not so long ago...cant be bothered to find it as this lastest reply is enuff for me
#111
PassionFord Post Whore!!
Join Date: Aug 2004
Location: Kent
Posts: 4,364
Likes: 0
Received 0 Likes
on
0 Posts
So Martin what your saying is you would or wouldnt supply me parts?
Get Sean to send the pump to Rainbird and i will pay him...dont want the filters though.
Pon as said we will see...if its shite i wont be using it
Get Sean to send the pump to Rainbird and i will pay him...dont want the filters though.
Pon as said we will see...if its shite i wont be using it
#112
1st to 200 without NOS
iTrader: (2)
Originally Posted by Bosch Man
So Martin what your saying is you would or wouldnt supply me parts?
Get Sean to send the pump to Rainbird and i will pay him...dont want the filters though.
Pon as said we will see...if its shite i wont be using it
Get Sean to send the pump to Rainbird and i will pay him...dont want the filters though.
Pon as said we will see...if its shite i wont be using it
#113
PassionFord Post Whore!!
Join Date: Aug 2004
Location: Kent
Posts: 4,364
Likes: 0
Received 0 Likes
on
0 Posts
i send stuff all over the world and was quite surprised when you intimated to sean that this might be the case. i'm pretty sure rainbow wont be receiving the pump
#114
BANNED
BANNED
Thread Starter
iTrader: (1)
Join Date: Jul 2003
Location: Wiltshire
Posts: 12,483
Likes: 0
Received 0 Likes
on
0 Posts
Anyway, sorry to but back in on my thread chaps but........
sunny,
You were the first to mention the A word on this thread not me
The only thing to come out of Austrailia to give me a stiffy is Kylie
I originally started this thread so yes I have got something to do with it
I have never made any comment to Mark about his trader status as he does not
break the trader rules and so therefore has nothing to do with either of us.
Originally Posted by sunny
.....
You talk about being victimised....every time anyone says AUTRONIC you get an instant stiffy and get all paraniod that your business is going under.....why you so paraniod man, especially 99% of the time you got sod all to do with the discussion? Besides Mark's sent a back dated cheque....are you still going to behave in the same paranoid manner? I had nothing against you from day one and still don't as I can't be asked but you do bring it all on yourself mate.
You talk about being victimised....every time anyone says AUTRONIC you get an instant stiffy and get all paraniod that your business is going under.....why you so paraniod man, especially 99% of the time you got sod all to do with the discussion? Besides Mark's sent a back dated cheque....are you still going to behave in the same paranoid manner? I had nothing against you from day one and still don't as I can't be asked but you do bring it all on yourself mate.
You were the first to mention the A word on this thread not me
The only thing to come out of Austrailia to give me a stiffy is Kylie
I originally started this thread so yes I have got something to do with it
I have never made any comment to Mark about his trader status as he does not
break the trader rules and so therefore has nothing to do with either of us.
#115
Originally Posted by Matt
thou shall not talk to blinkered tossers
did someone mention 201.8 today? its been a while i almost forgot
did someone mention 201.8 today? its been a while i almost forgot
Get used to it you NMS groupie, it happened & it wernt your god that did it.
#116
BANNED
BANNED
Thread Starter
iTrader: (1)
Join Date: Jul 2003
Location: Wiltshire
Posts: 12,483
Likes: 0
Received 0 Likes
on
0 Posts
MADRod,
With respect, my original point was about power NOT top speed.
I have helped to map a slightly more powerfull YB engine than yours on the same
dyno facility but this will not be used for top speed runs.
At the end of the day, there is more to top speed runs than just engine power as
you know.
I posted this thread originally to gauge power output comparisons for the same
dyno facility when YB engines have been used - no other reason.
With respect, my original point was about power NOT top speed.
I have helped to map a slightly more powerfull YB engine than yours on the same
dyno facility but this will not be used for top speed runs.
At the end of the day, there is more to top speed runs than just engine power as
you know.
I posted this thread originally to gauge power output comparisons for the same
dyno facility when YB engines have been used - no other reason.
#118
PassionFord Post Whore!!
Simon seems like a pointless thread as all you needed to do is call Simon I take it it was his dyno we are talking about, Would have been quicker and just as accurat to do this, I will be there soon to up the power stakes on my Cossie set-ups
Mark
Mark
#119
BANNED
BANNED
Thread Starter
iTrader: (1)
Join Date: Jul 2003
Location: Wiltshire
Posts: 12,483
Likes: 0
Received 0 Likes
on
0 Posts
Mark,
I doubt if I called you and asked for certain information this would not have been disclosed.
Nearly all tuners I know are reluctant to talk about their secrets/power figures.
At the time, it was just easier to ask a question on here like most others are
allowed to do except for me as it seems.
Its only pointless if no one gives me a fair chance to explain but rather
have a go about non related subjects.
This has become a pointless thread because of some unfair comments
and accusations that have been said.
Some have tried to turn this into a MADvSECS war which was NOT my intention.
As I have said many times before, I have much profesional respect for your
work but no one listens !!!!
As for my future dealings with a certain company, it looks like somebody has
betrayed a confidence to me ....
But I suppose you wont tell me who it was.....
I doubt if I called you and asked for certain information this would not have been disclosed.
Nearly all tuners I know are reluctant to talk about their secrets/power figures.
At the time, it was just easier to ask a question on here like most others are
allowed to do except for me as it seems.
Its only pointless if no one gives me a fair chance to explain but rather
have a go about non related subjects.
This has become a pointless thread because of some unfair comments
and accusations that have been said.
Some have tried to turn this into a MADvSECS war which was NOT my intention.
As I have said many times before, I have much profesional respect for your
work but no one listens !!!!
As for my future dealings with a certain company, it looks like somebody has
betrayed a confidence to me ....
But I suppose you wont tell me who it was.....
#120
PassionFord Post Whore!!
Simon I meant to say call Simon Norris and ask him, I have always been very open with my Dyno graph's and most have been posted, However there are some people who dont show there graph's I also know that one even inflated his Tq fig by 102ftlb fron the fig I know it made.
Mark
Mark