Scissor Jack Death
#42
1st to 200 without NOS
iTrader: (2)
Very sad
I learned about axle stands at a very early age, when I was about 12 I was really into the mechanical side of cars and used to watch my neighbour (two doors away) messing with his old Austin 1100. He couldn't open his bonnet without me landing on his drive, one day exactly the same thing happened to him and he was trapped under the car, I raised the alarm and a couple of neighbours lifted it off him, luckily for him he got away with it.
I learned about axle stands at a very early age, when I was about 12 I was really into the mechanical side of cars and used to watch my neighbour (two doors away) messing with his old Austin 1100. He couldn't open his bonnet without me landing on his drive, one day exactly the same thing happened to him and he was trapped under the car, I raised the alarm and a couple of neighbours lifted it off him, luckily for him he got away with it.
#44
Too many posts.. I need a life!!
Land Rover have decided to save weight on the new Range Rover and removed the bottle jack and replaced it with a scissor jack.
2 and a half ton on a scissor jack
RIP .
2 and a half ton on a scissor jack
RIP .
#46
Too many posts.. I need a life!!
thats terrible RIP to your mate.
If going underneath always have a failsafe even with a proper trolley jack should also have stands or even have a couple of wheels with tyres just in case.
If going underneath always have a failsafe even with a proper trolley jack should also have stands or even have a couple of wheels with tyres just in case.
#48
PassionFord Post Whore!!
RIP to the guy that died
#57
20K+ Super Poster.
Sorry to hear that matey, rip your mate.
I refuse to go under a car even if it had 4 axle stands 1 at each corner.
The best £15 I ever spent was on a old railway sleeper, cut into squares, and use these instead of axle stands, I use the axle stands to support stuff like exhaust etc, but not car.
I suppose the sleepers having 100 ton+ locos going on them a car weight won't bother them!!
tabetha
I refuse to go under a car even if it had 4 axle stands 1 at each corner.
The best £15 I ever spent was on a old railway sleeper, cut into squares, and use these instead of axle stands, I use the axle stands to support stuff like exhaust etc, but not car.
I suppose the sleepers having 100 ton+ locos going on them a car weight won't bother them!!
tabetha
Thread
Thread Starter
Forum
Replies
Last Post
paceo
General Car Related Discussion.
8
25-09-2015 08:05 PM
Adam Graham
Restorations, Rebuilds & Projects.
7
06-09-2015 06:04 AM