General Car Related Discussion. To discuss anything that is related to cars and automotive technology that doesnt naturally fit into another forum catagory.

F1 Spec????

Thread Tools
 
Search this Thread
 
Old 10-12-2009, 12:49 PM
  #241  
Mike Rainbird
Caraholic
iTrader: (3)
 
Mike Rainbird's Avatar
 
Join Date: May 2003
Location: Norwich
Posts: 26,403
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by Chip
You could call them "WRC spec springs" quite legimately then mate, unlike mike with his out of date spoiler he is obsessing so much about
I've cracked it - I can call it an Escort Cosworth WRC spoiler, that way there is absolutely no way there can be any confusion with current WRC cars . With this in mind, the F1 springs can be called "DFV F1 springs", which would also clarify things here as well . Much better than "historic" .
Old 10-12-2009, 01:01 PM
  #242  
Danny @ Enhanced Performance
BANNED
BANNED
iTrader: (3)
 
Danny @ Enhanced Performance's Avatar
 
Join Date: Feb 2006
Posts: 2,380
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Mike Rainbird
I've cracked it - I can call it an Escort Cosworth WRC spoiler, that way there is absolutely no way there can be any confusion with current WRC cars . With this in mind, the F1 springs can be called "DFV F1 springs", which would also clarify things here as well . Much better than "historic" .
nice one mike from now on im calling them cosworth dfv f1 springs....

hang on a minute though


























is that ok with you chip?????




cheers danny
Old 10-12-2009, 01:01 PM
  #243  
wozzy
Regular Contributor
Thread Starter
 
wozzy's Avatar
 
Join Date: Mar 2008
Location: Warlingham
Posts: 207
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Mike Rainbird
Ryan,
That is only assuming a certain amount of motorsport knowledge, which to me is the same assumption as I am making about F1. I personally thought that everyone with a modicom of knowledge knew that these "F1 springs" were from the Cosworth DFV engines of the 80s.

But then I also know there difference in many of the above items.
i would say i'm 'fairly' clued up on engines/engine building/motorsport etc. well certainly no less than alot of people on here, but i didn't no the above. hence why i asked the question

and i got the answer about 3 pages ago
Old 10-12-2009, 01:05 PM
  #244  
wozzy
Regular Contributor
Thread Starter
 
wozzy's Avatar
 
Join Date: Mar 2008
Location: Warlingham
Posts: 207
Likes: 0
Received 0 Likes on 0 Posts
Default

[quote=Chip;4565471]I think that was Wozzy's intention when he started it


it wasn't chip, it was a genuine question to which i didn't no the answer. how ever sarcasticly i worded it it was still a genuine question
Old 10-12-2009, 01:09 PM
  #245  
Mike Rainbird
Caraholic
iTrader: (3)
 
Mike Rainbird's Avatar
 
Join Date: May 2003
Location: Norwich
Posts: 26,403
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by wozzy
i would say i'm 'fairly' clued up on engines/engine building/motorsport etc. well certainly no less than alot of people on here, but i didn't no the above. hence why i asked the question

and i got the answer about 3 pages ago
You can't even spell "know", so the jury is out on your motorsport knowledge .

You probably DID know, but your brain has since been addled when you moved to the dark side and purchased that Jap bean tin thing .

Next Dave will be joining you, and he will also forget all his accumulated Cosworth knowledge when he has no need for it due to the reliability (AKA character-less to us ardent Cossie fans ) of his Jap crap Evo .
Old 10-12-2009, 01:19 PM
  #246  
wozzy
Regular Contributor
Thread Starter
 
wozzy's Avatar
 
Join Date: Mar 2008
Location: Warlingham
Posts: 207
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Mike Rainbird
Chip,
The only point I was trying to make is that if you want to belittle Danny or anyone else for stating "F1 spec" instead of "Historic F1 spec" is that you need to apply this across the board to appear consistant, rather than belittling.

Therefore, myself and anyone else with this kind of spec should really be reminded by yourself and cronies et al, that we have "historic WRC spec" items, so as not to confuse people .
mike, i think your comparison to 'wrc' or historic wrc spec items is incorrect. When someone is selling a 'wrc' spoiler for an escort you know its not current. As most people on here know when escorts were in wrc. but the term f1 implies something that has been going for donkeys years. so how would you know unless you ask

Last edited by wozzy; 10-12-2009 at 01:20 PM.
Old 10-12-2009, 01:20 PM
  #247  
Chip
*** Sierra RS Custard ***
iTrader: (3)
 
Chip's Avatar
 
Join Date: Dec 2006
Posts: 47,250
Received 22 Likes on 14 Posts
Default

Originally Posted by b19 dfp
nice one mike from now on im calling them cosworth dfv f1 springs....

is that ok with you chip?????
Sounds very accurate to me
Old 10-12-2009, 01:21 PM
  #248  
JamesH
10K+ Poster!!
iTrader: (21)
 
JamesH's Avatar
 
Join Date: Jul 2003
Location: .
Posts: 10,807
Received 8 Likes on 8 Posts
Default

Originally Posted by Mike Rainbird
You can't even spell "know", so the jury is out on your motorsport knowledge .

You probably DID know, but your brain has since been addled when you moved to the dark side and purchased that Jap bean tin thing .

Next Dave will be joining you, and he will also forget all his accumulated Cosworth knowledge when he has no need for it due to the reliability (AKA character-less to us ardent Cossie fans ) of his Jap crap Evo .
Old 10-12-2009, 01:33 PM
  #249  
Danny @ Enhanced Performance
BANNED
BANNED
iTrader: (3)
 
Danny @ Enhanced Performance's Avatar
 
Join Date: Feb 2006
Posts: 2,380
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Chip
Sounds very accurate to me
thank god for that!!!! im happy now to know in the future if i say cosworth dfv f1 springs that no body will ever think im trying to big up thier engine!!!!

even if they have got much better springs than most..

cheers danny
Old 10-12-2009, 01:34 PM
  #250  
wozzy
Regular Contributor
Thread Starter
 
wozzy's Avatar
 
Join Date: Mar 2008
Location: Warlingham
Posts: 207
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Mike Rainbird
You can't even spell "know", so the jury is out on your motorsport knowledge .

You probably DID know, but your brain has since been addled when you moved to the dark side and purchased that Jap bean tin thing .

Next Dave will be joining you, and he will also forget all his accumulated Cosworth knowledge when he has no need for it due to the reliability (AKA character-less to us ardent Cossie fans ) of his Jap crap Evo .
i didn't realise this was a spelling test mike. However know is the correct spelling, i just used it in the wrong context. oops and i type i instead of I.

Sheady doesn't use good grammer on this forum either but that doesn't effect his technical knowledge does it. i'm sure he's made you look silly in technical discussions many a time!!

PLease someone shut this thread down now. My question has been answered lol

Last edited by wozzy; 10-12-2009 at 01:36 PM.
Old 10-12-2009, 01:44 PM
  #251  
Alan_D
PassionFord Post Troll
 
Alan_D's Avatar
 
Join Date: Mar 2008
Location: UK
Posts: 3,162
Likes: 0
Received 0 Likes on 0 Posts
Default

PMSL at 'he knows hes shit'. It's even a tag now!
Old 10-12-2009, 01:45 PM
  #252  
mechanic28
10K+ Poster!!

iTrader: (5)
 
mechanic28's Avatar
 
Join Date: Apr 2007
Location: london
Posts: 13,649
Received 4 Likes on 3 Posts
Default

Have the children finished yet?
Old 10-12-2009, 01:57 PM
  #253  
LHD220Turbo
10K+ Poster!!
iTrader: (4)
 
LHD220Turbo's Avatar
 
Join Date: Oct 2007
Location: swindon, wiltshire
Posts: 10,654
Received 18 Likes on 15 Posts
Default

Originally Posted by wozzy
PLease someone shut this thread down now. My question has been answered lol
you can do that yourself mate as the thread starter
Old 10-12-2009, 02:03 PM
  #254  
wozzy
Regular Contributor
Thread Starter
 
wozzy's Avatar
 
Join Date: Mar 2008
Location: Warlingham
Posts: 207
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by LHD220Turbo
you can do that yourself mate as the thread starter
it was said in jest but thankyou. i didn't know that
Old 10-12-2009, 02:44 PM
  #255  
Mike Rainbird
Caraholic
iTrader: (3)
 
Mike Rainbird's Avatar
 
Join Date: May 2003
Location: Norwich
Posts: 26,403
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by wozzy
i didn't realise this was a spelling test mike. However know is the correct spelling, i just used it in the wrong context. oops and i type i instead of I.

Sheady doesn't use good grammer on this forum either but that doesn't effect his technical knowledge does it. i'm sure he's made you look silly in technical discussions many a time!!

PLease someone shut this thread down now. My question has been answered lol
Actually, I don't recall Mr Slim ever having done that, as he doesn't stoop so low as attempting to belittle people, he has Chip for that .

I was attempting to inject some humour, I apologise if it seemed like you were receiving a lesson - perhaps you have spent too much time around Chip to believe that was the case .
Old 10-12-2009, 02:52 PM
  #256  
Its Dave
Advanced PassionFord User
iTrader: (4)
 
Its Dave's Avatar
 
Join Date: Sep 2008
Location: Sutton
Posts: 2,250
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Mike Rainbird
You can't even spell "know", so the jury is out on your motorsport knowledge .

You probably DID know, but your brain has since been addled when you moved to the dark side and purchased that Jap bean tin thing .

Next Dave will be joining you, and he will also forget all his accumulated Cosworth knowledge when he has no need for it due to the reliability (AKA character-less to us ardent Cossie fans ) of his Jap crap Evo .
God here we go, ive sold the cossie and still be spoke about, must of been a legend in my own right

Mike just so l clear on this what WRC parts do you have now?


Cheers
Old 10-12-2009, 02:56 PM
  #257  
dangerousbrian
Advanced PassionFord User
 
dangerousbrian's Avatar
 
Join Date: Nov 2007
Location: home
Posts: 1,593
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by dangerousbrian
after reading most of this thread, i gather that a few people are comparing engine builders against each other..can it be comparable when they build different engines? also probably a daft question, but what makes a good engine builder?
so can anyone shed some light on this? or is it just a case of picking someone at random then bumlicking them to death?
Old 10-12-2009, 02:59 PM
  #258  
Rod-Tarry
Happily retired
 
Rod-Tarry's Avatar
 
Join Date: Nov 2006
Location: Hampshire
Posts: 7,707
Received 237 Likes on 151 Posts
Default

Great read.
Good to see Tuners bringing F1 Technology to their cars, well ive a few choice parts as well, cant get left behind Danny.

http://cgi.ebay.co.uk/7-color-LED-Decoration-Bar-Interior-Light-car-kit-F1_W0QQitemZ300375722121QQcmdZViewItemQQptZUK_Cars Parts_Vehicles_CarParts_SM?hash=item45efc9c889

http://cgi.ebay.co.uk/Formula-1-car-air-freshener-legend-citrus-F1-present_W0QQitemZ200390597740QQcmdZViewItemQQptZUK _CarsParts_Vehicles_CarParts_SM?hash=item2ea835dc6 c
Old 10-12-2009, 03:00 PM
  #259  
Chip
*** Sierra RS Custard ***
iTrader: (3)
 
Chip's Avatar
 
Join Date: Dec 2006
Posts: 47,250
Received 22 Likes on 14 Posts
Default

Originally Posted by dangerousbrian
so can anyone shed some light on this? or is it just a case of picking someone at random then bumlicking them to death?
I cant help on the basis of which engine builders are good or not, as I build my own engines, but I guess you can just look at which ones build the type of engine you want and have plenty of happy customers and not many unhappy ones.

MAD / NMS / SCS all seem to be pretty good bets for a YB for example.

Couldnt tell you if one is particuarly better than the other as I have never used any of them, but if I was going to do so I would probably go to Mark just because I have always found him very approachable and I know lots of satisfied customers of his.

I dont think you will ever definitively be able to say that one engine builder is clearcut better than another though!
Old 10-12-2009, 03:02 PM
  #260  
pee vee
PassionFord Post Whore!!
 
pee vee's Avatar
 
Join Date: Jul 2004
Location: Wiltshire, Bath, chippenham area!
Posts: 7,428
Likes: 0
Received 4 Likes on 4 Posts
Default

My my my... some predicted 3.. some even 5....

but 7 pages later!? and still it snowballs
Old 10-12-2009, 03:05 PM
  #261  
Chip
*** Sierra RS Custard ***
iTrader: (3)
 
Chip's Avatar
 
Join Date: Dec 2006
Posts: 47,250
Received 22 Likes on 14 Posts
Default

Originally Posted by pee vee
My my my... some predicted 3.. some even 5....

but 7 pages later!? and still it snowballs
Now its been given the opportunity by Brian to have a go at Tuna Warz, it could get to double figures easily
Old 10-12-2009, 03:05 PM
  #262  
Its Dave
Advanced PassionFord User
iTrader: (4)
 
Its Dave's Avatar
 
Join Date: Sep 2008
Location: Sutton
Posts: 2,250
Likes: 0
Received 0 Likes on 0 Posts
Default

Where has Mike gone? Check out the WRC parts and 909 items
Old 10-12-2009, 03:10 PM
  #263  
Mike Rainbird
Caraholic
iTrader: (3)
 
Mike Rainbird's Avatar
 
Join Date: May 2003
Location: Norwich
Posts: 26,403
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by Its Dave
God here we go, ive sold the cossie and still be spoke about, must of been a legend in my own right

Mike just so l clear on this what WRC parts do you have now?


Cheers
YUM will be remembered for years to come .

At present:
WRC Pub spec =
Inlet manifold
Rear spoiler
Front splitter
Front bumper
Front wings
Front brakes (CP6235LC)

Grp A Pub spec =
Rear brakes
Airbox
Suspension
R&D Front diff

Coming shortly:
Front hubs
Front ARB
Front TCAs
Front cross-member

And taking pride of place, a WRC sticker on the back .
Old 10-12-2009, 03:12 PM
  #264  
Chip
*** Sierra RS Custard ***
iTrader: (3)
 
Chip's Avatar
 
Join Date: Dec 2006
Posts: 47,250
Received 22 Likes on 14 Posts
Default

Looking forward to seeing it at Bedford then Mike, sounds good

Will it be able to run full boost on the day or is the exhaust still too noisey?
Old 10-12-2009, 03:15 PM
  #265  
Its Dave
Advanced PassionFord User
iTrader: (4)
 
Its Dave's Avatar
 
Join Date: Sep 2008
Location: Sutton
Posts: 2,250
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Mike Rainbird
YUM will be remembered for years to come .

At present:
WRC Pub spec =
Inlet manifold
Rear spoiler
Front splitter
Front bumper
Front wings
Front brakes (CP6235LC)

Grp A Pub spec =
Rear brakes
Airbox
Suspension
R&D Front diff

Coming shortly:
Front hubs
Front ARB
Front TCAs
Front cross-member

And taking pride of place, a WRC sticker on the back .

nice list you have Mike

Now can we see the list without the FAKE WRC parts please

We would not want to confuse people with whats original and whats fake
Old 10-12-2009, 03:21 PM
  #266  
Jay,
Sponsor



iTrader: (4)
 
Jay,'s Avatar
 
Join Date: May 2004
Location: south east
Posts: 25,222
Received 407 Likes on 329 Posts
Default

this board gets more like the daily sport every day ! this particular thread as about as muxh bullshit to
Old 10-12-2009, 03:24 PM
  #267  
Mike Rainbird
Caraholic
iTrader: (3)
 
Mike Rainbird's Avatar
 
Join Date: May 2003
Location: Norwich
Posts: 26,403
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by Chip
Looking forward to seeing it at Bedford then Mike, sounds good

Will it be able to run full boost on the day or is the exhaust still too noisey?
Seems to vary on the conditions. The last time I was there (Feb this year), I only ran it at 1.6 bar, as they had changed the warning process, so that basically there was none - you trip the meter and you're off for good .

However, at 4.45, I got into a battle with Lee and thought fuck it, if I get black flagged and kicked off now, who cares at this late stage - so cranked the boost up to the full 2.2 bar and let loose. Had great fun keeping Lee at bay for the last few laps (even though I had no idea he was cheating - I was concentrating that much ) and didn't get flagged :dunno:.

I'm not stupid though, this could have been because they couldn't seperate the noise between myself and Lord Manning, and he can basically hit 300dB and they'll still let him keep going . Perhaps I just need to make sure I always stay within a few car lengths of him .
Old 10-12-2009, 03:26 PM
  #268  
Mike Rainbird
Caraholic
iTrader: (3)
 
Mike Rainbird's Avatar
 
Join Date: May 2003
Location: Norwich
Posts: 26,403
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by Its Dave
nice list you have Mike

Now can we see the list without the FAKE WRC parts please

We would not want to confuse people with whats original and whats fake
That will be all the cosmetic parts, which are all copies of the originals - apart from the wings, as they were done by the same guy that did them for the works cars .
Old 10-12-2009, 03:28 PM
  #269  
cabrio zo
PassionFord Post Whore!!
 
cabrio zo's Avatar
 
Join Date: Jul 2003
Location: Sudbury Suffolk, Drives: Octavia VRS & XR2i 1800 Zetec track car
Posts: 4,275
Likes: 0
Received 0 Likes on 0 Posts
Default

Least this has kept you all entertained for the day eh

Z
Old 10-12-2009, 03:30 PM
  #270  
Its Dave
Advanced PassionFord User
iTrader: (4)
 
Its Dave's Avatar
 
Join Date: Sep 2008
Location: Sutton
Posts: 2,250
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Jay_
this board gets more like the daily sport every day ! this particular thread as about as muxh bullshit to

Jay what makes you think that?

Wouldn't have something to do with all the tits on here
Old 10-12-2009, 03:31 PM
  #271  
Chip
*** Sierra RS Custard ***
iTrader: (3)
 
Chip's Avatar
 
Join Date: Dec 2006
Posts: 47,250
Received 22 Likes on 14 Posts
Default

Originally Posted by Mike Rainbird
Seems to vary on the conditions. The last time I was there (Feb this year), I only ran it at 1.6 bar, as they had changed the warning process, so that basically there was none - you trip the meter and you're off for good .
been like that for a few years now, 1 strike and you are out


However, at 4.45, I got into a battle with Lee and thought fuck it, if I get black flagged and kicked off now, who cares at this late stage - so cranked the boost up to the full 2.2 bar and let loose. Had great fun keeping Lee at bay for the last few laps (even though I had no idea he was cheating - I was concentrating that much ) and didn't get flagged :dunno:.

I'm not stupid though, this could have been because they couldn't seperate the noise between myself and Lord Manning, and he can basically hit 300dB and they'll still let him keep going . Perhaps I just need to make sure I always stay within a few car lengths of him .
FPMSL

So true, like the time me and Rich and Jim went there in Jim's M3 and they were fully booked till we name dropped then they fitted us in no problem
Old 10-12-2009, 03:32 PM
  #272  
Jay,
Sponsor



iTrader: (4)
 
Jay,'s Avatar
 
Join Date: May 2004
Location: south east
Posts: 25,222
Received 407 Likes on 329 Posts
Default

Originally Posted by Its Dave
Jay what makes you think that?

Wouldn't have something to do with all the tits on here
there's more tits on here than than a tit convention
Old 10-12-2009, 03:33 PM
  #273  
Mike Rainbird
Caraholic
iTrader: (3)
 
Mike Rainbird's Avatar
 
Join Date: May 2003
Location: Norwich
Posts: 26,403
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by Jay_
there's more tits on here than than a tit convention

There is now that you and Dave have joined in !
Old 10-12-2009, 03:36 PM
  #274  
Jay,
Sponsor



iTrader: (4)
 
Jay,'s Avatar
 
Join Date: May 2004
Location: south east
Posts: 25,222
Received 407 Likes on 329 Posts
Default

Originally Posted by Mike Rainbird
There is now that you and Dave have joined in !
once again your wrong rainbird im another part of a woman's anatomy closely related to chip its called a cunt
Old 10-12-2009, 03:38 PM
  #275  
Rod-Tarry
Happily retired
 
Rod-Tarry's Avatar
 
Join Date: Nov 2006
Location: Hampshire
Posts: 7,707
Received 237 Likes on 151 Posts
Default

Originally Posted by dangerousbrian
after reading most of this thread, i gather that a few people are comparing engine builders against each other..can it be comparable when they build different engines? also probably a daft question, but what makes a good engine builder?
One that supplies what you ask for at a price you both agree on.
I got just what i asked for so for me thats the best engine builder.

If you hang on a few months Danny & his mate Luke will be facing MAD for the Topspeed crown 'F1' AGAINST 'Isky' if you like .
I asked for an engine to set records, for 5 years MAD have delivered so perhaps he deserves a bumlick .
In case Mike gets excited, that last line is only a joke .
Old 10-12-2009, 03:51 PM
  #276  
Its Dave
Advanced PassionFord User
iTrader: (4)
 
Its Dave's Avatar
 
Join Date: Sep 2008
Location: Sutton
Posts: 2,250
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Mike Rainbird
There is now that you and Dave have joined in !


Cheers Mike

Old 10-12-2009, 04:02 PM
  #277  
Mike Rainbird
Caraholic
iTrader: (3)
 
Mike Rainbird's Avatar
 
Join Date: May 2003
Location: Norwich
Posts: 26,403
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by Jay_
once again your wrong rainbird im another part of a woman's anatomy closely related to chip its called a cunt

You will have no arguement from me in that regard .
Old 10-12-2009, 04:23 PM
  #278  
timrud
BANNED
BANNED
 
timrud's Avatar
 
Join Date: May 2003
Location: Mars
Posts: 4,578
Likes: 0
Received 0 Likes on 0 Posts
Default

I wish Chip would become historic Chip and not post here any more!

The following would happen:

1. This website would become for more harmonious.

2. MAD's popularitary would rise ten fold
Old 10-12-2009, 04:28 PM
  #279  
Chip
*** Sierra RS Custard ***
iTrader: (3)
 
Chip's Avatar
 
Join Date: Dec 2006
Posts: 47,250
Received 22 Likes on 14 Posts
Default

Originally Posted by timrud
I wish Chip would become historic Chip and not post here any more!

If you wish that, simply add me to your ignore list, problem solved.

But then you couldnt spend so much time moaning about me as you do, so I guess that you enjoy that too much to actually want me on ignore
Old 10-12-2009, 04:31 PM
  #280  
timrud
BANNED
BANNED
 
timrud's Avatar
 
Join Date: May 2003
Location: Mars
Posts: 4,578
Likes: 0
Received 0 Likes on 0 Posts
Default

Chip it was purely banter!! I stopped taking your posts literaly a long time ago

But me putting you on ignore would not have the same effect of you getting your arms stolen by aliens so you can't type


Quick Reply: F1 Spec????



All times are GMT. The time now is 04:57 AM.