Does anyone know if the battery in a toad ai606 remote would be the same size as a clifford concept 300 remote battery?

I don't know what the cliiford takes, but toad are 2032, as I just looked, it might help
tabetha

Cheers. ive got a clifford concept battery here you see, which is a CR2032 aswell, so ill keep that incase i need it for my currant toad alarm

Open it and see it it fits... Not rocket science is it....

Its a tight fit, last time i opened one it broke the circuit board inside and i had to solder it back together, thats why im asking instead

You'll be fine with the toad fobs, just use a spoon to prise in the gap near the ring/slot at bottom right corner if facing you, then the inner bit board and battery just pops out in a silicone moulding, take out board, use a small pointed bit to prise/slide battery out, reverse procedure.
It would be pretty hard to accidentally break a toad one, I've never broke one in over 10 years.
tabetha

The one i broke by simply opening it was a clifford, all i did was pop it off and the circuit board come out in my hand

Thanks tabetha