![]() |
Question about 3dr's
Do all 3dr wings have date stamps on the top of the wings?
Just went and looked at a 3dr and one of the wings didnt. Just wing looked original, the mouthing rails looked untouched, the factory seam tape on the front panel was untouched, the mouting was perfect and underneath the underseal looked original. Very strange i thought all 3dr wings have ford badges and dates stamps. Do they? It was the drivers front wing if it makes a difference. Alos the slam panel was original and ford stamped and date marked and so was the other wing, but not this one. |
Think they are stamped on both wings mate.
Not 100% though |
yeah thats what i thought, but you know how many 3dr i've looked at and this wing looked original. just no date stamp.
|
bttt someone must know.
|
It may be a replacement ford wing BUT been put on Properly.This can happen and in some case's undetectable. :top: :top: :top:
|
yeah just seems strange as its that good a job though. I.e not a single mark on the mouthing rail, welds are perefect etc etc
Jsut seems strange. Its hard a back panel aswell (but not done with a ford part), but also done well, but i would want to put a proper ford item on there, as non-genuine items are wafer thin Just stuck as what to do. :? |
mate if your thinking about it then i'd say leave it.The right one will come along soon :D
|
i've been searching that long mate, the fact im thinking about it means it may be worth it.
|
Originally Posted by pattozs
mate if your thinking about it then i'd say leave it.The right one will come along soon :D
|
The stamps can be quite faint, possibly been painted a couple of times- therefore covering it up!?
Max |
I am 99% sure they are all stamped but if their not it isn't that bad a thing they could have just been replaced due to a bit of rot, not unusual for an 18 year old car.
|
yeah thats what me and the owner where thinking.
As there is evidence of paint. Might ask him to rub that suspected stamp area down a little. |
yeah i know Gav :cry: :cry: :cry: :cry:
hence why im going down this route as its the only way i can have exactly what i want. |
fookin hell - ryan u still looking for that unicorn?
|
i've given up on the unicorn mate.
just looking for a trusty steed now :cry: :cry: :cry: :cry: but i will make her a bit special ;) |
bttt for more suggestions
|
Ryan
Only 1 of my wings has a date stamp on it BUT like you have said about the car you are looking at, the seals etc are PERFECT ;) ;) I went through the whole, "Is it, isnt it" thing but in the end it is perfect and without looking for a stamp would never know :top: :top: |
All 3 doors have both wings stamped!
Ryan i suspect that you will never find exactly what you are looking for so why not just take the plunge :? |
If its ben done well enough that the only issue is no date stamp I wouldnt let it put you off mate!
It could have had a woman driver scrape it in safeway car park or something! :content: |
think im going to take the plungeeeeeeeeeeeee
FUCK IT, ITS ONLY MONEY :cool: :top: :top: :top: :top: :top: |
Go for it Ryan :top: :top: :top: :top: :top:
|
i am
foooook knows what im doing. Going to need lots of help and lots and lots of parts. :cry: :cry: :cry: :cry: :cry: :cry: |
:clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap:
|
Here's to the new project. :beer: :beer: :beer: :beer: :beer:
Best not take aslong as my RST :cry: :cry: :cry: |
Originally Posted by Ryan
Might ask him to rub that suspected stamp area down a little.
Then you turn round and say ........... nah phucket Im not interested :cry: :cry: :cry: :cry: |
thats what I thought Deano... its like asking to take my rods out to see if they're steel- but not quite as extreme
J |
its a shell mate ;)
and it needs some paint so im sure he doesn mind ;) |
doesnt matter now anyway
i'll rub the wing down, when it get delivered to my house :cool: |
:cool:
|
phhheeeww finally :top:
best of luck dude :clap: |
cheers ran
you know what i may want back ;) |
Originally Posted by Ryan
its a shell mate ;)
and it needs some paint so im sure he doesn mind ;) :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :blabla: |
originality my yellow lemon friend
just would be nice to have all 100% original panels |
Originally Posted by Ryan
just would be nice to have all 100% original panels
Although Id just lie and say my cock of a painter gave it a couple of extra coats :cry: :cry: :cry: :cry: |
Originally Posted by Ryan
cheers ran
you know what i may want back ;) |
If your that worried about it and it needs painting anyway.Get it stamped the same as the other side b4 painting. :blabla: :blabla: :blabla:
|
need lots of parts so let me know ran ;)
yeah deano that will be the story. :cry: :cry: :cry: :cry: |
ryan
every single panel was stamped on a 3dr the yr eg: 86/87) if there's no stamp on the panel or panels they have been changed at some point in it's live :top: :top: cheers Marco |
thought so marco ;)
panel must have been done very very early on in its life, and been done by fords. Not that fussed, its a old car got to expect some knocks. Cleanest shell i've seen in a while though :cool: 64k miles and kept in a warm climate so no rust :cool: |
ryan i will let u know once i have made my mind up what to do mate ;) ;)
|
| All times are GMT. The time now is 08:23 PM. |
© 2026 MH Sub I, LLC dba Internet Brands