My front diff has been to the dentist!
#42
10K+ Poster!!
iTrader: (1)
Originally Posted by andrewfgallacher
Originally Posted by marco polo
Originally Posted by andrewfgallacher
Originally Posted by marco polo
hi mike
you was quick enough to blame the box without really checking anything
atleast you know it's the front diff
Hi andy
did you break a 1st gear in the R+D not so long ago ?
hi spiky
nothing wrong with dave's box at all , it's his release clutch bearing that is fooked and thats got fook all to do with the box
you lot always seem to blame the box all the fooking time when there clearly nothing wrong with them
i get you lot a good product and all you lot do it is give it bad press all the time ,
same as the other gezza who owns the blue 600bhp escort @silverstone blamed the box striaght away and the after taking the gear box out it was his twin plate clutch was fooked
fook yourselfs from now on get another fooking box i have had enough of this shite
the only down fall with this box is it's still a syncromesh box thats it which was disigned for road/track day car
marco
you was quick enough to blame the box without really checking anything
atleast you know it's the front diff
Hi andy
did you break a 1st gear in the R+D not so long ago ?
hi spiky
nothing wrong with dave's box at all , it's his release clutch bearing that is fooked and thats got fook all to do with the box
you lot always seem to blame the box all the fooking time when there clearly nothing wrong with them
i get you lot a good product and all you lot do it is give it bad press all the time ,
same as the other gezza who owns the blue 600bhp escort @silverstone blamed the box striaght away and the after taking the gear box out it was his twin plate clutch was fooked
fook yourselfs from now on get another fooking box i have had enough of this shite
the only down fall with this box is it's still a syncromesh box thats it which was disigned for road/track day car
marco
had no problems with the front diff at all.
to be honest the box has lasted well im not knocking it in anyway
i know a few peeps that have had them some have lasted a long time some have failed in such a short time
one thing i like about the R+D it is a dog box
Bara could do a dog box we have talked about doing one but the only problem would be is demand if he was to have a few orders he most defo would go ahead and do a few but it would have to be at the right price to , too sell them
marco
hi andy
if he does do one ,you would be the 1st person to test it as you do a hell of alot of trackdays not only your car has the power aswell
you would get it free of charge to test it and if it breaks dont worry about
ill just get it fixed send it back to you no cost
marco
#43
PassionFord Post Whore!!
iTrader: (4)
Originally Posted by marco polo
hi andy
if he does do one ,you would be the 1st person to test it as you do a hell of alot of trackdays not only your car has the power aswell
you would get it free of charge to test it and if it breaks dont worry about
ill just get it fixed send it back to you no cost
marco
Cant say better than that
#44
BANNED
BANNED
iTrader: (1)
Join Date: Jul 2003
Location: Wiltshire
Posts: 12,483
Likes: 0
Received 0 Likes
on
0 Posts
Marco,
Its Simon (SECS ) been in your above mood many times BEFORE
I ever got any shit/deserved abuse off people from this site.
People forget you/me are only ONE person with limited resources.
You probally will take offence at me comparing myself with you but I hope
you understand what I am trying to say.
Its Simon (SECS ) been in your above mood many times BEFORE
I ever got any shit/deserved abuse off people from this site.
People forget you/me are only ONE person with limited resources.
You probally will take offence at me comparing myself with you but I hope
you understand what I am trying to say.
#45
10K+ Poster!!
iTrader: (1)
Originally Posted by Flux Capacitor
Marco,
Its Simon (SECS ) been in your above mood many times BEFORE
I ever got any shit/deserved abuse off people from this site.
People forget you/me are only ONE person with limited resources.
You probally will take offence at me comparing myself with you but I hope
you understand what I am trying to say.
Its Simon (SECS ) been in your above mood many times BEFORE
I ever got any shit/deserved abuse off people from this site.
People forget you/me are only ONE person with limited resources.
You probally will take offence at me comparing myself with you but I hope
you understand what I am trying to say.
#46
10K+ Poster!!
iTrader: (1)
Originally Posted by miller3
Originally Posted by marco polo
hi andy
if he does do one ,you would be the 1st person to test it as you do a hell of alot of trackdays not only your car has the power aswell
you would get it free of charge to test it and if it breaks dont worry about
ill just get it fixed send it back to you no cost
marco
Cant say better than that
thats what we did with the first 3mullit gearboxes put them all in test cars first before releasing them to fix any bugs ect to get them 100%right
not many people do that to be honest
marco
#57
Marco,
You REALLY should learn to read and also REMEMBER what people say to you. When you said I was jumping the gun by blaming the box the FIRST time, I pointed out to you that I was attributing it to one of THREE transmission related things, the main input shaft, the front diff CWP OR the prop shaft . From the noise I knew it was ONE of those things, I never once on this forum attributed the blame to the 'box . When I pointed this out to you last time, you said "oh yeah, I see that now". How come a few days later, you're accusing me of blaming the 'box again , when I maintained the whole time that I wasn't sure which of the three things above it was going to be. However, I then posted up that I thought it was the diff after running it up on axle stands and getting underneath the car - but again, according to you, that is blaming the gearbox .
Dave,
It wasn't a matter of not wanting to waste any oil, it was the fact that I wanted to get the car to Harvey's before dropping the diff plate, as he is 75miles away from me, and if it turned out to be the diff (as I started to think it was after running it up on axle stands as per my original post), I didn't want the hassle of having to refit everything and then drop it all again at Harveys (where it needed to go to for a check-over after the 'Ring as it had an intermittant boost problem due to a sticking waste-gate) .
You REALLY should learn to read and also REMEMBER what people say to you. When you said I was jumping the gun by blaming the box the FIRST time, I pointed out to you that I was attributing it to one of THREE transmission related things, the main input shaft, the front diff CWP OR the prop shaft . From the noise I knew it was ONE of those things, I never once on this forum attributed the blame to the 'box . When I pointed this out to you last time, you said "oh yeah, I see that now". How come a few days later, you're accusing me of blaming the 'box again , when I maintained the whole time that I wasn't sure which of the three things above it was going to be. However, I then posted up that I thought it was the diff after running it up on axle stands and getting underneath the car - but again, according to you, that is blaming the gearbox .
Dave,
It wasn't a matter of not wanting to waste any oil, it was the fact that I wanted to get the car to Harvey's before dropping the diff plate, as he is 75miles away from me, and if it turned out to be the diff (as I started to think it was after running it up on axle stands as per my original post), I didn't want the hassle of having to refit everything and then drop it all again at Harveys (where it needed to go to for a check-over after the 'Ring as it had an intermittant boost problem due to a sticking waste-gate) .
#58
Re: My front diff has been to the dentist!
Originally Posted by L8 ECU
Mike, I would advise fitting a brand new CW&P set, and also having them peened and polished.
It's less likely to fail again
It's less likely to fail again
#59
10K+ Poster!!
Originally Posted by dave cos4x4
Well i'm not going to say i told you so but.....
all that time waiting because you wanted to save some oil.
at least the box is still going strong then Mike.
an easy ish fix then Mike.
you can get yourself booked onto the December 27th trackday at Donno now.
all that time waiting because you wanted to save some oil.
at least the box is still going strong then Mike.
an easy ish fix then Mike.
you can get yourself booked onto the December 27th trackday at Donno now.
#60
Advanced PassionFord User
Originally Posted by JTECHSAFF
ive done nearly 30k on my mullit now
not running huge power ,but i did break 3 standard boxes in a year
not had any issues yet, still feels like new
not running huge power ,but i did break 3 standard boxes in a year
not had any issues yet, still feels like new
Originally Posted by marco polo
it's not that , i get vexed sometimes there is posts on here by a few people that always blame the box FIRST without checking the whole transmission
they put the mouth into gear if it is the box then fair enough ill do something about it striaght away
marco
keep up the good work
#63
10K+ Poster!!
iTrader: (2)
Join Date: May 2004
Location: UK
Posts: 11,383
Likes: 0
Received 0 Likes
on
0 Posts
Re: My front diff has been to the dentist!
Originally Posted by L8 ECU
Originally Posted by L8 ECU
Mike, I would advise fitting a brand new CW&P set, and also having them peened and polished.
It's less likely to fail again
It's less likely to fail again
#65
10K+ Poster!!
iTrader: (1)
Originally Posted by Mike Rainbird
Marco,
You REALLY should learn to read and also REMEMBER what people say to you. When you said I was jumping the gun by blaming the box the FIRST time, I pointed out to you that I was attributing it to one of THREE transmission related things, the main input shaft, the front diff CWP OR the prop shaft . From the noise I knew it was ONE of those things, I never once on this forum attributed the blame to the 'box . When I pointed this out to you last time, you said "oh yeah, I see that now". How come a few days later, you're accusing me of blaming the 'box again , when I maintained the whole time that I wasn't sure which of the three things above it was going to be. However, I then posted up that I thought it was the diff after running it up on axle stands and getting underneath the car - but again, according to you, that is blaming the gearbox .
Dave,
It wasn't a matter of not wanting to waste any oil, it was the fact that I wanted to get the car to Harvey's before dropping the diff plate, as he is 75miles away from me, and if it turned out to be the diff (as I started to think it was after running it up on axle stands as per my original post), I didn't want the hassle of having to refit everything and then drop it all again at Harveys (where it needed to go to for a check-over after the 'Ring as it had an intermittant boost problem due to a sticking waste-gate) .
You REALLY should learn to read and also REMEMBER what people say to you. When you said I was jumping the gun by blaming the box the FIRST time, I pointed out to you that I was attributing it to one of THREE transmission related things, the main input shaft, the front diff CWP OR the prop shaft . From the noise I knew it was ONE of those things, I never once on this forum attributed the blame to the 'box . When I pointed this out to you last time, you said "oh yeah, I see that now". How come a few days later, you're accusing me of blaming the 'box again , when I maintained the whole time that I wasn't sure which of the three things above it was going to be. However, I then posted up that I thought it was the diff after running it up on axle stands and getting underneath the car - but again, according to you, that is blaming the gearbox .
Dave,
It wasn't a matter of not wanting to waste any oil, it was the fact that I wanted to get the car to Harvey's before dropping the diff plate, as he is 75miles away from me, and if it turned out to be the diff (as I started to think it was after running it up on axle stands as per my original post), I didn't want the hassle of having to refit everything and then drop it all again at Harveys (where it needed to go to for a check-over after the 'Ring as it had an intermittant boost problem due to a sticking waste-gate) .
Mike
you thought it was the box as Micheal escosracer posted a topic called "OUR BOYS @ THE RING " clearly stateing the box has gone
personally if the box had gone, theres no way you could have drove 500 mile home , not a chance
it's posts like that give the box bad press when clearly now we all know it wasn't the box ,thats what i mean , people just blaming the box striaght away .....
if any of your parts break on your cars why dont you find out first what has gone before you post or add something to an exhisting post what the problem was
ok now why dont you buy or get hold of a thickwall front diff casing and build standard open diff with a strenthing plate into the casing you might aswell shot peen the CWP should do the job
marco
#66
Professional Waffler
iTrader: (5)
Originally Posted by JonnyBravo
Originally Posted by dave cos4x4
Well i'm not going to say i told you so but.....
all that time waiting because you wanted to save some oil.
at least the box is still going strong then Mike.
an easy ish fix then Mike.
you can get yourself booked onto the December 27th trackday at Donno now.
all that time waiting because you wanted to save some oil.
at least the box is still going strong then Mike.
an easy ish fix then Mike.
you can get yourself booked onto the December 27th trackday at Donno now.
yes,its a noisey day.
#68
PassionFord Post Whore!!
iTrader: (4)
Originally Posted by Mike Rainbird
Doug,
I have a good CWP out of my car (less than 20k miles of 227bhp ), so will use that until an R&D comes up again for sensible money (Tim Finch recently sold one for £1500). Don't really want to spend £3k on one .
I have a good CWP out of my car (less than 20k miles of 227bhp ), so will use that until an R&D comes up again for sensible money (Tim Finch recently sold one for £1500). Don't really want to spend £3k on one .
#69
Originally Posted by marco polo
Originally Posted by Mike Rainbird
Marco,
You REALLY should learn to read and also REMEMBER what people say to you. When you said I was jumping the gun by blaming the box the FIRST time, I pointed out to you that I was attributing it to one of THREE transmission related things, the main input shaft, the front diff CWP OR the prop shaft . From the noise I knew it was ONE of those things, I never once on this forum attributed the blame to the 'box . When I pointed this out to you last time, you said "oh yeah, I see that now". How come a few days later, you're accusing me of blaming the 'box again , when I maintained the whole time that I wasn't sure which of the three things above it was going to be. However, I then posted up that I thought it was the diff after running it up on axle stands and getting underneath the car - but again, according to you, that is blaming the gearbox .
Dave,
It wasn't a matter of not wanting to waste any oil, it was the fact that I wanted to get the car to Harvey's before dropping the diff plate, as he is 75miles away from me, and if it turned out to be the diff (as I started to think it was after running it up on axle stands as per my original post), I didn't want the hassle of having to refit everything and then drop it all again at Harveys (where it needed to go to for a check-over after the 'Ring as it had an intermittant boost problem due to a sticking waste-gate) .
You REALLY should learn to read and also REMEMBER what people say to you. When you said I was jumping the gun by blaming the box the FIRST time, I pointed out to you that I was attributing it to one of THREE transmission related things, the main input shaft, the front diff CWP OR the prop shaft . From the noise I knew it was ONE of those things, I never once on this forum attributed the blame to the 'box . When I pointed this out to you last time, you said "oh yeah, I see that now". How come a few days later, you're accusing me of blaming the 'box again , when I maintained the whole time that I wasn't sure which of the three things above it was going to be. However, I then posted up that I thought it was the diff after running it up on axle stands and getting underneath the car - but again, according to you, that is blaming the gearbox .
Dave,
It wasn't a matter of not wanting to waste any oil, it was the fact that I wanted to get the car to Harvey's before dropping the diff plate, as he is 75miles away from me, and if it turned out to be the diff (as I started to think it was after running it up on axle stands as per my original post), I didn't want the hassle of having to refit everything and then drop it all again at Harveys (where it needed to go to for a check-over after the 'Ring as it had an intermittant boost problem due to a sticking waste-gate) .
Mike
you thought it was the box as Micheal escosracer posted a topic called "OUR BOYS @ THE RING " clearly stateing the box has gone
personally if the box had gone, theres no way you could have drove 500 mile home , not a chance
it's posts like that give the box bad press when clearly now we all know it wasn't the box ,thats what i mean , people just blaming the box striaght away .....
if any of your parts break on your cars why dont you find out first what has gone before you post or add something to an exhisting post what the problem was
ok now why dont you buy or get hold of a thickwall front diff casing and build standard open diff with a strenthing plate into the casing you might aswell shot peen the CWP should do the job
marco
You are clearly loosing your marbles, as I have posted NUMEROUS times about my diff, so for you:
1. It IS a Quaife thickwall casing .
2. It DOES have a diff plate on .
3. Going to an open diff made Porkie's car understeer MORE , so I will keep my ATB thanks :.
#72
10K+ Poster!!
iTrader: (1)
hi mike
i know if a gear broke you can still drive it no probs as i have been doing that for a while with no 3rd
no worrys , im calm today lol
i have your slicks here if you still want them i have 2 sets for harvy aswell
just let us know when you want them
have you had the diff fixed yet ?
marco
marco
i know if a gear broke you can still drive it no probs as i have been doing that for a while with no 3rd
no worrys , im calm today lol
i have your slicks here if you still want them i have 2 sets for harvy aswell
just let us know when you want them
have you had the diff fixed yet ?
marco
marco
#73
10K+ Poster!!
Originally Posted by dave cos4x4
Originally Posted by JonnyBravo
Originally Posted by dave cos4x4
Well i'm not going to say i told you so but.....
all that time waiting because you wanted to save some oil.
at least the box is still going strong then Mike.
an easy ish fix then Mike.
you can get yourself booked onto the December 27th trackday at Donno now.
all that time waiting because you wanted to save some oil.
at least the box is still going strong then Mike.
an easy ish fix then Mike.
you can get yourself booked onto the December 27th trackday at Donno now.
yes,its a noisey day.
#74
Professional Waffler
iTrader: (5)
Originally Posted by marco polo
hi mike
i know if a gear broke you can still drive it no probs as i have been doing that for a while with no 3rd
no worrys , im calm today lol
i have your slicks here if you still want them i have 2 sets for harvy aswell
just let us know when you want them
have you had the diff fixed yet ?
marco
marco
i know if a gear broke you can still drive it no probs as i have been doing that for a while with no 3rd
no worrys , im calm today lol
i have your slicks here if you still want them i have 2 sets for harvy aswell
just let us know when you want them
have you had the diff fixed yet ?
marco
marco
lol, you been hounding Marco for the slicks i had Mike, they must have impressed you lol.
Thread
Thread Starter
Forum
Replies
Last Post
Focosmitch
Ford RS Cosworth Parts for Sale
5
03-11-2015 04:08 PM