Well Done Simpson Race Exhausts
#44
Guest
Posts: n/a
Originally Posted by Fiecos Dan
Not bad.
i bet materials was nearly half that, and then 2 - 3 days labour.
i bet materials was nearly half that, and then 2 - 3 days labour.
Yes when Mark @ MAD was looking to get this sorted for me we was looking at 9 bends at Ł75.00 each..
After Mark speaking to Matt, Matt agreed on the price
So really dont think it would have gone to Simpons if Mark had not found them..
Also just to say Mark did take time out to pop down to Simpons so they could have a look at a Escort Cossie and work out whats needed..
Cheers Mark
#45
I had a full system made by matt and his guys last year for my lil old corsa, top quality stuff, was well impressed, and a year later it looks as though its just been put on.
I am intending to go there also when i get my 3 door
I am intending to go there also when i get my 3 door
#54
10K+ Poster!!
iTrader: (2)
Join Date: May 2004
Location: UK
Posts: 11,383
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by martin-reyland
Originally Posted by Franco
Paul R tried fitting a 2wd set up on his new engine, but couldnt clear the oil filter arm wih the block connector(if that makes sense!!).
Fouled it big time!
Fouled it big time!
Oh Look what i've done Paul!
PS Dave exhaust looks spot on!
#56
PassionFord Post Whore!!
Originally Posted by Franco
Originally Posted by Fiecos Dan
why have you retained the 4wd set up?
the 2wd set up is a better and direct flow, with cooler and cleaner oil.
Originally Posted by Franco
Paul R tried fitting a 2wd set up on his new engine, but couldnt clear the oil filter arm wih the block connector(if that makes sense!!).
Fouled it big time!
Fouled it big time!
i never had a issue, putting my 4wd engine to 2wd oil feed, and i retained dash oil pressure light switch and got my Racetech oil pressure gauge take off there too.
#58
Re: Well Done Simpson Race Exhausts
Originally Posted by MAD YUM
but would the turbo oil filter be better placed not over the glowing turbo???
#60
Too many posts.. I need a life!!
Join Date: Apr 2005
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
Hi Dave, so what does she sound like? I want to hear some sound clips With regards to traction control with the SM4 does mark think its a good idea? I remember talking to him a while ago about it and he wasnt that keen on using it?
#61
Caraholic
iTrader: (3)
Originally Posted by Fiecos Dan
Originally Posted by Franco
Originally Posted by Fiecos Dan
why have you retained the 4wd set up?
the 2wd set up is a better and direct flow, with cooler and cleaner oil.
Originally Posted by Franco
Paul R tried fitting a 2wd set up on his new engine, but couldnt clear the oil filter arm wih the block connector(if that makes sense!!).
Fouled it big time!
Fouled it big time!
1 x Threaded in both ends - is standard on 2wd Cosworth (no longer available from Ford) to have oil feed pipe to turbo and oil pressure sender on inlet side of block close to dipstick - Ł15 + delivery.
#64
Guest
Posts: n/a
Originally Posted by Mike Rainbird
Originally Posted by Fiecos Dan
Originally Posted by Franco
Originally Posted by Fiecos Dan
why have you retained the 4wd set up?
the 2wd set up is a better and direct flow, with cooler and cleaner oil.
Originally Posted by Franco
Paul R tried fitting a 2wd set up on his new engine, but couldnt clear the oil filter arm wih the block connector(if that makes sense!!).
Fouled it big time!
Fouled it big time!
1 x Threaded in both ends - is standard on 2wd Cosworth (no longer available from Ford) to have oil feed pipe to turbo and oil pressure sender on inlet side of block close to dipstick - Ł15 + delivery.
cheers
#66
Monte Geek
Join Date: Jun 2003
Location: Cheshunt, Herts
Posts: 8,812
Likes: 0
Received 0 Likes
on
0 Posts
The reason I couldn't get the 2wd oil feed to fit was because I didn't have the adapter between the feed and the oil feed adapter as pointed out in this pic:-
I asked a few places and no one helped me out and impatience made me just fit the 4x4 one.
If someone is kind enough to find or sell me said adapter then I'd fit it esp seeing as I need to fit a new oil pressure sender anyway
I asked a few places and no one helped me out and impatience made me just fit the 4x4 one.
If someone is kind enough to find or sell me said adapter then I'd fit it esp seeing as I need to fit a new oil pressure sender anyway
#69
Monte Geek
Join Date: Jun 2003
Location: Cheshunt, Herts
Posts: 8,812
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Franco
Does that mean you lose the oil pressure switch on the dash though Paul
#70
Monte Geek
Join Date: Jun 2003
Location: Cheshunt, Herts
Posts: 8,812
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CossieRich
Originally Posted by Franco
Does that mean you lose the oil pressure switch on the dash though Paul
#71
10K+ Poster!!
iTrader: (2)
Join Date: May 2004
Location: UK
Posts: 11,383
Likes: 0
Received 0 Likes
on
0 Posts
Ahh thats the difference then as mines removed & had the defi pressure switch fitted at the bottom. Looks to me like you'd just fit the 2wd adaptor to the 4wd version
CossieRich
Shoot me if i'm talking crap but does the ECU not monitor Oil pressure?
But i'm sure the annoying light on the dash is only a lightbulb pull away!
CossieRich
Shoot me if i'm talking crap but does the ECU not monitor Oil pressure?
But i'm sure the annoying light on the dash is only a lightbulb pull away!
#72
PassionFord Regular
Join Date: Dec 2006
Location: Bexley, Kent
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
Brilliant stuff!!
I was really impressed with them when I went there to ask about the system on my car. They said it would take a week (due to be picked up the day I went to FITP this year) and she was done 3-4 days! I LOVE my exhaust and can't praise Simpson highly enough. People have commented time & time again about the quality of their work and thoughtful little touches like pins to stop the exhaust mounts coming off the hangers (which has happened to one or two of our members). I cant even remember how I found them but I'm glad I did!
I was really impressed with them when I went there to ask about the system on my car. They said it would take a week (due to be picked up the day I went to FITP this year) and she was done 3-4 days! I LOVE my exhaust and can't praise Simpson highly enough. People have commented time & time again about the quality of their work and thoughtful little touches like pins to stop the exhaust mounts coming off the hangers (which has happened to one or two of our members). I cant even remember how I found them but I'm glad I did!
#73
Monte Geek
Join Date: Jun 2003
Location: Cheshunt, Herts
Posts: 8,812
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Franco
Ahh thats the difference then as mines removed & had the defi pressure switch fitted at the bottom. Looks to me like you'd just fit the 2wd adaptor to the 4wd version
#76
Monte Geek
Join Date: Jun 2003
Location: Cheshunt, Herts
Posts: 8,812
Likes: 0
Received 0 Likes
on
0 Posts
Mike the ones in your pics are just standard ford copies..
The 2wd adapter won't fit with the 4x4 oil mondine arm
The 4x4 one needs a male to male adapter to fit the 2wd oil feed which I don't have/couldn't get
Now if your not blind please LOOK at the pic I posted there is a big RED arrow pointing to the part I need
The 2wd adapter won't fit with the 4x4 oil mondine arm
The 4x4 one needs a male to male adapter to fit the 2wd oil feed which I don't have/couldn't get
Now if your not blind please LOOK at the pic I posted there is a big RED arrow pointing to the part I need
#77
Testing the future
Originally Posted by Franco
Shoot me if i'm talking crap but does the ECU not monitor Oil pressure?
that's a top job they've done there dave, you must be well happy with that