Setting up Koni's
 

...ok just bought a second hand set of front koni's (cheers Tabz) i have no idea where they are set...how many position is there and how do i reset set them to number 1 position? I assume that means softest?


Thanks :content:

fronts=turn them fully clockwise to harden.

will need to get the instructions out to check rear settings but have to be done off the car

with the rear removed from the car compress them in a vice.

a 180 deg turn clock wise stifens them to first setting.

360 deg turn to middle and a 720 deg turn to full hard

3 settings on rear i think. push and twist

fronts are self explanitory :P

all the way anti clock wise until they stop to set to full soft to start with then

...cheers Rapid..and bollocks to Jimbo :cry: ;)

How many settings on the front?

phil, thrun it all the way to the left, then all te way to the right (counting the clicks)

THAT'S HOW MANY SETTINGS THERE ARE :cry:

..so you dont know but feel the need to answer :cry: :roll: :blabla:

mines dont click at all :?

The fronts don't click, well, not the common yellow sports kit. The equivalent of a click is half a turn (180 degrees).