XR3i / RS2000 16v interior?!?
#1
Virgin
Thread Starter
Join Date: Jun 2011
Location: Brighton
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
XR3i / RS2000 16v interior?!?
XR3i 16v / RS2000 Mk5 interior seat cloth / material, door card, rear bench seat. (May of been used in Mk6's too?)
I have for sale original Ford material to replace any worn bolsters / seats on the wing back seats that were in Mk5 XR3i's and RS2000's and some other Fords around that time.
The material is of two types.
1. Red, grey and black. Some times described as fleck. Used on door cards and middles of seats. These pieces are used but good condition and measure roughly 43" x 21" and 32" x 38".
2. The next piece is quite large 43" x 52" and brand new grey and black fleck, found on the bolsters of the wing back seats! That's right I had my seats re-trimmed due to the bolsters wearing. It took me a long time to find original Ford material to replace the worn stuff. It is an old obsolete part now and not sold. Even ten years ago you would have a job finding this stuff! Since finding it I have never seen it for sale ever again, making this VERY rare indeed! Ford part number – ‘2B<M49V3214’. I would also consider selling a section i.e. cutting a required size.
3. I also have the rear bench seat for a XR3i 16v / RS2000 Mk5. in good condition. Rear bench only!
4. Also one XR3i 16v / RS2000 Mk5 drivers door card, very good condition. With speaker grill and compartment.
5. Passenger side door card compartment.
I don't need any of it any more as I have since sold the car. I know it is very rare to find and am open to sensible offers.
Email me and I can send photos clearly showing my car before and after re-trim and the materials and colours I have.
darryl.k@live.co.uk
I have for sale original Ford material to replace any worn bolsters / seats on the wing back seats that were in Mk5 XR3i's and RS2000's and some other Fords around that time.
The material is of two types.
1. Red, grey and black. Some times described as fleck. Used on door cards and middles of seats. These pieces are used but good condition and measure roughly 43" x 21" and 32" x 38".
2. The next piece is quite large 43" x 52" and brand new grey and black fleck, found on the bolsters of the wing back seats! That's right I had my seats re-trimmed due to the bolsters wearing. It took me a long time to find original Ford material to replace the worn stuff. It is an old obsolete part now and not sold. Even ten years ago you would have a job finding this stuff! Since finding it I have never seen it for sale ever again, making this VERY rare indeed! Ford part number – ‘2B<M49V3214’. I would also consider selling a section i.e. cutting a required size.
3. I also have the rear bench seat for a XR3i 16v / RS2000 Mk5. in good condition. Rear bench only!
4. Also one XR3i 16v / RS2000 Mk5 drivers door card, very good condition. With speaker grill and compartment.
5. Passenger side door card compartment.
I don't need any of it any more as I have since sold the car. I know it is very rare to find and am open to sensible offers.
Email me and I can send photos clearly showing my car before and after re-trim and the materials and colours I have.
darryl.k@live.co.uk
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM