C0S_TURBO

Hi, I own a 2wd sapphire cosworth. It is stage 1 at the moment, but I have recently purchased a three bar map sensor a set of greens and a new chip. I think my clutch is on its way out. In third when I floor it the revs go up but the car doesn’t go any faster, after few seconds the car then starts to accelerate. I use the car every day! What sort of clutch should I be looking for and who sells them? It needs to be strong enough for the stage three mods but also fairly drivable.

Many thanks for your help.

twitchyrear

standard clutch shoul be ok for stage 3,but will be on its limit

JamesH

iTrader: (21)

To an extent I agree, but a standard clutch on a GOOD stage 3 car will NOT last (i.e 350bhp stage 3 )

whitecossie

same prob with mine ,it goes ok but seems to rev and no take off when , so waht clutch would u guys recomend and any idea of the prices please ?

cheers

TIFF

My NMS Stage 1 distroyed my Standard Clutch

Go for an ALCON 6 Paddle clutch with Standard AP cover.......Was superb on my Stage 4 370bhp 3DR

B11GNS

Standard clutch will do the job but wont last long. As Tiff said go for an alcon 6 paddle with ford cover, although make sure its an ap made ford cover and not the sachs one. This is what i ran on my old 3dr which was about 330bhp and also on my black one which will be about 380bhp!

twitchyrear

i agree standard clutch probobly wouldnt last longer than 12months,but mine lasted 18months when i was running 346bhp so it is a waiting game so do as i did and get a 6paddle

JamesH

iTrader: (21)

Cos Turbo PM'd me the other day and I suggested exactly the same that you guys did

Mad Matt

iTrader: (2)

Is what you are talking about also the same for a 4x4 or is that differant (need something more heavy) on a 330+ preparation ?