Guess the bolt location (no prize for winner)
 

Ok, so I've put the cam cover back on, refitted the cambelt cover and the turbo heat sheild but have this left in the tray.

I don't recall it coming off while stripping down but I'm lost to where it goes.....

any ideas......13mm head with a floating washer....

https://cimg4.ibsrv.net/gimg/passion...5f165245a3.jpg

https://cimg0.ibsrv.net/gimg/passion...196a44480a.jpg

Overhead manifold sprocket

I did look at the waffle sprocket first but that's still there......

flux capacitor is ok aswell....

If the flux is ok then I would add a bucket of steam and a long wait, that should sort it.

Sorry I cannot help More

Cheers caddy,

even looked at the sky hook, no joy so off to fill the chocolate teapot and ponder my manuals.

And after all that.....old battery terminal connection....

Removed the round post adapter and fitted a square post battery the other night....

https://cimg0.ibsrv.net/gimg/passion...6efdea8cbf.jpg

Rear engine lifting eye with bracket for waterpipe.

That's not a stock bolt then as the original battery leads are connected via a m6 square headed bolt.

😛