My first cossie
#1
Wahay!! I've lost my Virginity!!
Thread Starter
My first cossie
Well bought it last weekend. Pretty tidy running decent power. Putting some softlines on next weekend with some proxes as it's running standard rims with terrible Chinese things on the back!
Need to sort suspension at front too as it's got about 10mm ground clearance lol
It's running t34 and bd10 cams so goes ok.
Has a few issues I need to get sorted. Exhaust is knocking.
I have a clunk when I pull away in 1st from back right and a whirring noise back right. Sounds like bushes and maybe a wheel bearing. Car has barely done any miles recently and has full history which is nice just to sort gremlins out if you have any ideas .
Mines the white one. Hi all
Need to sort suspension at front too as it's got about 10mm ground clearance lol
It's running t34 and bd10 cams so goes ok.
Has a few issues I need to get sorted. Exhaust is knocking.
I have a clunk when I pull away in 1st from back right and a whirring noise back right. Sounds like bushes and maybe a wheel bearing. Car has barely done any miles recently and has full history which is nice just to sort gremlins out if you have any ideas .
Mines the white one. Hi all
#2
10K+ Poster!!
Nice looking car, it is very odd when people put cheap tyres on a performance car...mine had Nankangs on the back and used to spin up all the time
#3
PassionFord Post Troll
Seen this on eBay I fell in love it just sat perfect, love a white saff on ambers. The only thing I noticed on the eBay add was there was a dodgy looking repair in the spare wheel well was this maybe just the picture?
#4
Wahay!! I've lost my Virginity!!
Thread Starter
It could be I'm getting up on ramp next weekend to have a good look maybe something I should of done before hand lol but I noticed boot doesn't quite sit right. Not to fussed. Needs a full going over and all the joints etc checking as it was sat a fair while. Then new year I'll get it book it at msd to be setup properly. Before the weather breaks.
#5
Advanced PassionFord User
Nice mate, you will always get niggles with any old car just keep on top of the car and enjoy.
#6
Wahay!! I've lost my Virginity!!
Thread Starter
Can't wait to get wheels suspension and rattles sorted delivers the power well.
Forgot coming from a brand new m3 what old cars are like lol almost as rattley as my mk1 Eacort I had haha
#7
PassionFord Post Troll
iTrader: (11)
Seen this on e bay recently as said.It will be great once all the niggles you have identified are sorts, with a good set up aswell, it will be a different car.ENJOY.
Totally agree with you, way to low on the front end, still got the ad saved on my ebay.
CheeRS.Lee.
Totally agree with you, way to low on the front end, still got the ad saved on my ebay.
CheeRS.Lee.
Trending Topics
#8
Regular Contributor
Mine had autogrip tyres on the rear when I bought it, slightest bit of damp and it would step out just going in a straight line. Running yokohama pradas now and couldn't be anymore different.
#10
PassionFord Post Troll
My dad's old car! The chap you bought it from on eBay got it from us. It was close to being stripped for a mk2 Escort project when my old man bought it.
Certainly went well, and a lot of good bits on her. Here she is with my Saff and my bro's S2
And when he picked her up (the horrible twin headlights were first to be changed!)
Good to see she is in good hands. I can pm you a little history if you want?
Certainly went well, and a lot of good bits on her. Here she is with my Saff and my bro's S2
And when he picked her up (the horrible twin headlights were first to be changed!)
Good to see she is in good hands. I can pm you a little history if you want?
#11
Wahay!! I've lost my Virginity!!
Thread Starter
My dad's old car! The chap you bought it from on eBay got it from us. It was close to being stripped for a mk2 Escort project when my old man bought it.
Certainly went well, and a lot of good bits on her. Here she is with my Saff and my bro's S2
And when he picked her up (the horrible twin headlights were first to be changed!)
Good to see she is in good hands. I can pm you a little history if you want?
Certainly went well, and a lot of good bits on her. Here she is with my Saff and my bro's S2
And when he picked her up (the horrible twin headlights were first to be changed!)
Good to see she is in good hands. I can pm you a little history if you want?
#12
Wahay!! I've lost my Virginity!!
Thread Starter
Passed MOT straight through yesterday.
All bushes etc sound.
Exhuast is brand new but knocking on gearbox so mate has a straight through system hes taking off in a few weeks ill change to. (i like a bit more noise!)
Plans for saturday.
fit springs from mike at r and b.
Change diff oil.
Change oil filter as it has tiny leak from it (and wipe underneath down).
Fit sofltines with proxes
realign front bumper and thats about it.
Once exhaust is changed will book it in with MSD to full service again and make sure its all running ok
Future plans are coilovers (open to suggestions on coilovers, i had BC which i loved on my focus rs (do they do some of the 2wd saph?), AP 6 pots and AP 6 paddle clutch change (not sure how much life is left in the current clutch lol).
Power wise i think once set up properly ill see how I get on with its. Its not the fastest car I have ever had but ive never driven anything close to 400bhp with no computers saving my ass . I have been in the one pictures above which is 480 but unsure of what i would need to do to get round about that power (seems a good amount to aim for in the future and when im a better driver.)
I plan on 3 track days next year. including one nurburgring trip, this wont be fast just to experience it for the first time. So hopefully it will be fully setup before spring last year.
All bushes etc sound.
Exhuast is brand new but knocking on gearbox so mate has a straight through system hes taking off in a few weeks ill change to. (i like a bit more noise!)
Plans for saturday.
fit springs from mike at r and b.
Change diff oil.
Change oil filter as it has tiny leak from it (and wipe underneath down).
Fit sofltines with proxes
realign front bumper and thats about it.
Once exhaust is changed will book it in with MSD to full service again and make sure its all running ok
Future plans are coilovers (open to suggestions on coilovers, i had BC which i loved on my focus rs (do they do some of the 2wd saph?), AP 6 pots and AP 6 paddle clutch change (not sure how much life is left in the current clutch lol).
Power wise i think once set up properly ill see how I get on with its. Its not the fastest car I have ever had but ive never driven anything close to 400bhp with no computers saving my ass . I have been in the one pictures above which is 480 but unsure of what i would need to do to get round about that power (seems a good amount to aim for in the future and when im a better driver.)
I plan on 3 track days next year. including one nurburgring trip, this wont be fast just to experience it for the first time. So hopefully it will be fully setup before spring last year.
Last edited by sambuca; 20-10-2016 at 10:48 AM.
#13
PassionFord Post Troll
Sounds good mate, coilover suggestions well I've got gaz golds and have been in 3 other cars that have had them and they are perfect for road use. You can spec the springs for your needs. I paid Ł860 through Corby motorsport which is cheaper than gaz direct.
Then if you've got a better budget there's black art design which I think are Ł1500?? But I've no experience of these.
Not seen bc's for cossies mate
Then if you've got a better budget there's black art design which I think are Ł1500?? But I've no experience of these.
Not seen bc's for cossies mate
#14
Wahay!! I've lost my Virginity!!
Thread Starter
Sounds good mate, coilover suggestions well I've got gaz golds and have been in 3 other cars that have had them and they are perfect for road use. You can spec the springs for your needs. I paid Ł860 through Corby motorsport which is cheaper than gaz direct.
Then if you've got a better budget there's black art design which I think are Ł1500?? But I've no experience of these.
Not seen bc's for cossies mate
Then if you've got a better budget there's black art design which I think are Ł1500?? But I've no experience of these.
Not seen bc's for cossies mate
i found the ap 6 pots for 1800ish and ap 6 paddle clutch for around Ł400 i think. Car luckily doesnt need to much after having a good look over it at the MOT yesterday. have a full polybush set coming tomorrow but the bushes are ok from what i saw. probably still worth getting them changed before i do a few track outings though.
#15
PassionFord Post Troll
From what I've been reading this seems to be the best clutch...
http://a191bf.39.ekmpowershop.net/ap...kit-1717-p.asp
http://a191bf.39.ekmpowershop.net/ap...kit-1717-p.asp
#16
Too many posts.. I need a life!!
i did have a look at gaz golds so good to hear someone who has had some first hand experience. ye saw some around that price on ebay but ill shop about so ill keep corby in mind.
i found the ap 6 pots for 1800ish and ap 6 paddle clutch for around Ł400 i think. Car luckily doesnt need to much after having a good look over it at the MOT yesterday. have a full polybush set coming tomorrow but the bushes are ok from what i saw. probably still worth getting them changed before i do a few track outings though.
i found the ap 6 pots for 1800ish and ap 6 paddle clutch for around Ł400 i think. Car luckily doesnt need to much after having a good look over it at the MOT yesterday. have a full polybush set coming tomorrow but the bushes are ok from what i saw. probably still worth getting them changed before i do a few track outings though.
#17
Wahay!! I've lost my Virginity!!
Thread Starter
#18
Wahay!! I've lost my Virginity!!
Thread Starter
From what I've been reading this seems to be the best clutch...
http://a191bf.39.ekmpowershop.net/ap...kit-1717-p.asp
http://a191bf.39.ekmpowershop.net/ap...kit-1717-p.asp
#19
PassionFord Post Troll
Do softlines offer decent brake clearance for 6 pots? Being just over 1200kg means 4 pots will be more than adequate but big brakes look awesome
Seen the seller of yours has advertised a minter of a moonstone 2wd? Nice little collection.
Seen the seller of yours has advertised a minter of a moonstone 2wd? Nice little collection.
#20
Advanced PassionFord User
iTrader: (1)
6 pots or 4 pots by itself doesn't say much, what's most important is the disc size. In most cases the AP 4 pots use 330 mm discs and AP 6 pots use 362 mm discs.
As far as I know the biggest softlines are 17" and I don't think they really give much clearance. So I doubt the 6 pots will fit. In fact I'm not even sure the 4 pots will fit, as the calipers might touch the wheel spokes. Although on a 2wd that is less of a problem than on a 4x4.
As far as I know the biggest softlines are 17" and I don't think they really give much clearance. So I doubt the 6 pots will fit. In fact I'm not even sure the 4 pots will fit, as the calipers might touch the wheel spokes. Although on a 2wd that is less of a problem than on a 4x4.
#21
Wahay!! I've lost my Virginity!!
Thread Starter
Ye he has loads of cars lol crazy
#22
PassionFord Post Troll
Personally not a fan of softlines or the diamond cut version either I much prefer comps but each to their own mate!
#24
Wahay!! I've lost my Virginity!!
Thread Starter
The guy selling car had them for sale so got a deal on them. Only reason igot them. I wanted to keep it periodish looking but after my mate brought his cossie down with the compos on lol looks wicked.
#26
Wahay!! I've lost my Virginity!!
Thread Starter
#28
PassionFord Post Troll
Wow mate that is more like it, what wheels are they I love them?
#29
PassionFord Post Troll
Gorgeous cossie aswell, noticed your on parada spec 2's I've got them on mine bloody hate them im taking them off. Since fitting them I've got less traction in first gear in the dry than I had with khumos (sp) and there's zero grip in the wet lol. I'm for rainsport 3's they are awesome.
#30
Regular Contributor
They're compomotive th 17x8''s i had them powder coated in bronze chrome.
I'm not a fan of the yoko's myself and will probably go for toyo's when i change them.
I'm not a fan of the yoko's myself and will probably go for toyo's when i change them.
#31
Wahay!! I've lost my Virginity!!
Thread Starter
#32
Wahay!! I've lost my Virginity!!
Thread Starter
Started work on it today changed front suspension then bottom arm broke so ordered some more for Monday will next week. Just gotta change kilter and exhaust now and I'm good to go.
Picked my softlines up with proxes on earlier look nice will tide me over till new year
Picked my softlines up with proxes on earlier look nice will tide me over till new year
#33
Wahay!! I've lost my Virginity!!
Thread Starter
Gorgeous cossie aswell, noticed your on parada spec 2's I've got them on mine bloody hate them im taking them off. Since fitting them I've got less traction in first gear in the dry than I had with khumos (sp) and there's zero grip in the wet lol. I'm for rainsport 3's they are awesome.
#34
I've found that life I needed.. It's HERE!!
I have some AP 6 pots for sapph with focus Rs alloys, I'm just looking into whether to sell them as I want reylands AP 295 kit to fit behind standard wheels
The following users liked this post:
sambuca (03-11-2016)
#35
Wahay!! I've lost my Virginity!!
Thread Starter
cars gone on RR for a setup today. Clutch slipping thought it might do so going to look at sorting that out may leave it till after xmas now though as out of country most of the next 6 weeks.
Last edited by sambuca; 03-11-2016 at 03:03 PM.
#36
PassionFord Post Troll
Where did you take it for the RR setup?
#37
Wahay!! I've lost my Virginity!!
Thread Starter
RRS rolling road services in lye near stourbridge as its round the corner from my house so thought id give him a try.
Did compression test 1 145, 2 145 3 135, 4 125 i tihnk he said from memory, no idea if thats ok or not. Thought i wanted 4 x 145 ish. he did say it was running well up to the point the clutch slipped.
Clutch let go in 4th but i knew it was probably on its way out as seems fked when i bought it lol
Did compression test 1 145, 2 145 3 135, 4 125 i tihnk he said from memory, no idea if thats ok or not. Thought i wanted 4 x 145 ish. he did say it was running well up to the point the clutch slipped.
Clutch let go in 4th but i knew it was probably on its way out as seems fked when i bought it lol
Last edited by sambuca; 03-11-2016 at 02:42 PM.
#39
Wahay!! I've lost my Virginity!!
Thread Starter
Clutch is well and truly goosed.
ordered some roose hoses from mike R and B hopefully sort the boost leak I have.
Will be getting the Ap 6 paddle as above from Mike after xmas or when im back from China in the new year. Also need to decide what exhuast to get
ordered some roose hoses from mike R and B hopefully sort the boost leak I have.
Will be getting the Ap 6 paddle as above from Mike after xmas or when im back from China in the new year. Also need to decide what exhuast to get