T5 speedo drive
Anyone know where these are available from? My speedo has been a bit twitchy lately and stopped working earlier. The cable seems ok so I'm presuming it's the drive in the gearbox worn
|
speedo
is it clipping into the rear of the clocks correctly?-some break the tabs and dont stay located for long-you get the twitching then total loss...
|
Originally Posted by BIL N KEL
(Post 6586509)
Anyone know where these are available from? My speedo has been a bit twitchy lately and stopped working earlier. The cable seems ok so I'm presuming it's the drive in the gearbox worn
I thought my speedo drive was gone too cos I had no speedo on the clocks. Replaced the cable, same thing. Checked the speedo drive and it was good!, after me spending close on £100 for a spare!! Turns out the plastic gear on the main shaft inside the box, has feckin disintegrated :wall: I managed to source another box which I got for cheap, that was some balls too cos they're so so bloody expensive and are close on 30 years old! I'm swapping the box in a few weeks so hopefully it'll work. Hope you can find one matey ;-) Philip. |
I'll investigate more Tuesday when my mates garage is open. I'll try the drill on the end of the cable trick to check it :)
|
For the plastic gear bit these are available in USA for numerous Tremec boxes and not expensive. I've bought a few for my Tremec box, and I think IIRC there are numerous product no's for different types of boxes. Mine looks identical to a T5 one save the little nose bit is a bit longer, but nothing a sharp knife or hacksaw wouldn't fix.
They're peanuts in the states. Colour coded according to the no. of teeth if you're messing around with wheel size etc. |
You mean the bit that goes on the shaft or in the drive itself?!
Any links where to get from?! |
All times are GMT. The time now is 11:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands