What power can I expect from my 2wd
 

Hi everyone, as the title says......

I've just had my 2wd chipped and set up using ahmed chip, dark greens, 3 bar map sensor already had full s/s system and standard air box. It's running 21-20 psi so what power could I expect?

I'd say 320-330 at that boost

Is it on a T3 or T34??

It's on a standard t3

About 300 then.

What part of Kent are you from ?

Steve

I'm in Rochester. I had it set up at grove garage in essex and mark said it should be 300+ was just wondering what other people had out if there's. Don't know if it's worth getting a power run?

Im not far away, Herne Bay.

Always worth checking the fueling is ok

Steve

Yeah like Steve says Dean, 300 ish.

My stage 2 T3 made 326 Bhp but that was peaking @ 2 bar :shocked::cry: stood up to the job though tbh, it was flat out, obviously they don't hold that boost.

I trust mark and ahmed have done the fueling as they fitted a lamba sensor in my down pipe and road tested.

Should be fine then.

Don't get caught up in the power thing.

As long as YOU are happy with the way it goes that's all that matters.

Steve

My stage 1 Ahmed bayjoo chip made 292bhp on a standard t3 and 316 lbft.

Be interesting to see what mine will run similar spec

Live map NMS
Dark greens
3 bar map sensor
RS500 cooler
Hybrid stg1 TT T3 360° bearing 60mm compressor, -31

?

:top:

at what boost pressure?

Not sure? 20-22psi maybe?

I will let you know once I've had it power run, only thing I haven't got is the stage 1 turbo, I have the -31

Ok thanks :thumbup: