got my new rear bells and rotors
 

Well worth the wait these. 320mm they use the std 4x4 caliper.
Attachment 53586

Better get my arse in gear and get them fitted.

How much is that kit, looks good.

does it make much difference if its using standard calipers?

Message mt motorsport on here bud. Had to wait as I wanted mine gold. Think they are blue that he has.

No fitted mine yet mate. Sharky on here also bought a set. He says they are great.
Attachment 53585

I dont have personal experience of this kit - but yes it will make a difference. - just by applying the laws of physics ... move the caliper further from the centre point = better braking - think leverage. Obv not as good as say 2 or 4pot rears, but has the advantage of retaining the handbrake on the caliper.
Pop a set of decent pads in and away you go.

they look great mate :D

I stayed std but vented as a lot of the time putting as mentioned above 2 or 4 pots on can make the rear brake too well and your end up putting a bias valve in. I'm putting one in anyway to be sure as the p100 is light on the ass end.

What size wheels do these need? I wonder if my 16 inch comps would cover them.

I'd stick with the 305mm version for 16's

Very nice mate. :top:

They are a decent bit of kit i've seen them, picking mine up on Saturday

how much are these ? i havent seen mark advertising them

+ 1 as I was gonna buy them from reyland

He does a smaller kit. Think it's 300mm

450 quid.

I can't find anything on the mt motorsport website for these?

I would bell him mate. He doesn't bit lol

These fitted yet mate ?

Not yet mate. Only just dropped the rear beam etc off to the powder coaters. Sharky and Brammer on here have got there's on.

Attachment 5564

Attachment 5565

Attachment 5566

These are my 300mm rears on my 2wd sapp, had them on since National Day & are awesome.
I had up graded the 2wd rears to 4x4 vented grooved rears but have had them glowing & gone purple after being on track but these haven't got that hot maybe due to larger area to disperse the heat. :clap::top:

Looking good there, nice upgrade.
Thinking of the reyland setup currently

Cant go wrong with bigger brakes.

I bought some rotors off of ebay and they were pretty cheap, they warped after a few months, then I found LUK Schaffer Brake rotors on sportsbrakerotors and I have couldn’t be happier.

I got a set of BLACK XD Brakes and installed them on Ford Sierra Cosworth and they're simply amazing.

Ordered my kit from Mark on Monday

Heres mine fitted, nice kit

Attachment 49568

Look nice Chris , what you got up front mate ?

330's on CP5200, just having the bells anodized the same colour as the rear at the min