RS500 heat shield
How much chopping do I have to do to get it to fit my Sapphire 4wd?
Don't really want to chop one up |
Originally Posted by saphcosmike
(Post 6064898)
How much chopping do I have to do to get it to fit my Sapphire 4wd?
Don't really want to chop one up |
Originally Posted by Paul_RS
(Post 6065178)
None if you don't have a strutbrace.
Ill try and dig it up, thanks :thumbup: |
My mate had a 2wd shiled on his 4x4 and i don't remember there being any hassle with the brake servo? YOu just need to get the 2wd brackets that bolt to the inner wing IIRC.
|
Thanks for the info :top:
|
Mine fitted in without too much work - all i had to do was cut a little off the front edge and at the top but thats due to breather hose
The bit that goes behind the downpipe is removed on mine as the breather pot pipe is around that area http://i17.photobucket.com/albums/b8...331024x768.jpg http://i17.photobucket.com/albums/b8...311024x768.jpg http://i17.photobucket.com/albums/b8...811024x768.jpg http://i17.photobucket.com/albums/b8...781024x768.jpg http://i17.photobucket.com/albums/b8...821024x768.jpg |
Originally Posted by BRAMMER
(Post 6065691)
Mine fitted in without too much work - all i had to do was cut a little off the front edge and at the top but thats due to breather hose
The bit that goes behind the downpipe is removed on mine as the breather pot pipe is around that area I've sent an email to mt Motorsport but have had no response, will have to wait and see :? |
All times are GMT. The time now is 08:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands