How do i change a rear diff mount????
As above, on a 2wd saff cossie, changing from standard mount to Group N, any help/ advice to get the old one off would be much apprieciated!! thanks!!
|
Notthing special, first did the 4 bolds to chassis, then the 2 that are connected to the diff. The arb should not give much trouble to work around.
Succes |
As said quite easy, just make sure to support car(chassis) on axle stands, AND support the diff weight,with jack/wood or it will jump down.
Plenty of coppaslip on the bolts when putting together. tabetha |
thanks for the replies.... all bolts out now but the mount still wont come off the diff!!
|
If you have defo taken out the TWO bolts that go through the mount to the diff rear casing, then it is just a bit of differential(metal) corrosion holding it.
You need an IRISH SCREWDRIVER, and whack it not too hard though. tabetha |
thanks, will give that a go....
|
Irish screwdriver. :cry:
|
All times are GMT. The time now is 04:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands