diff mount
Stripped the back end off me 2wd sapph to do the trailing arm bushes and it appears my diff mounting bush is split, :cry: does any one know where i can get one from and the likly cost. :top:
|
If you want uprated get one of these:
http://cgi.ebay.co.uk/GGR1071-Coswor...QQcmdZViewItem Not sure if standard ones are available new :? E-Bay or traders/breakers on here for good second hand one :top: |
can still get the standard ones from ford for 25 ish pound ;)
|
i recently put a ' group a' diff mount on mine. And yes imo it's deffo worth the extra cost over a standard new one. Much stiffer at the rear. When launching hard, no more that juddering of the wheels. Just rolling/spinning :top:
|
diff mount
i like the sound of that group A one, Now u mention it the car used to judder when setting off i assumed it was normal
:DD: |
i allready had front end uniballed, stiffer enginemounts and poly bushed the rear end. But still. Those 2 big beam mounts and the diff mounts, act like a triangle, now those 3 are taken care of and feels better. (could see on the old diff hanger, (a little pointy rubber thingy rubbed in the dirt/dust) that it used play around for over 2cm's) I also did my T5 mount for a fresh one.
Note this, i use the car mainly on trackdays. greets |
raibird imports them poly ali ones which are the dogs :top:
|
i have the group A one... wicked :top:
|
Originally Posted by dojj
raibird imports them poly ali ones which are the dogs :top:
|
them ali mounts with the poly bush inside
from yanksville u.s. of a. :top: as found on one of the merkur sites for soemthingl ike 25p after you convert from $ to £ :cry: :cry: :cry: also mispelt the name, rainbird as in r and b as in mike from norwich :DD: |
here's a direct link to the "group a" diff mount. these guys that make them are very active in the merkur community and are THE authority on merkur suspensions. i have one of these mounts and their poly beam bushings. my car no longer tries to swap ends when i hit the brakes. one of these will be going in the cossie sometime too.
http://www.mc2racing.com/products/xr...507/index.html |
Originally Posted by dojj
them ali mounts with the poly bush inside
from yanksville u.s. of a. :top: as found on one of the merkur sites for soemthingl ike 25p after you convert from $ to £ :cry: :cry: :cry: also mispelt the name, rainbird as in r and b as in mike from norwich :DD: Acutaly did I already know of m2racing but forgot there web address :( until now :top: thanks you you guys |
Originally Posted by xr4man
here's a direct link to the "group a" diff mount. these guys that make them are very active in the merkur community and are THE authority on merkur suspensions. i have one of these mounts and their poly beam bushings. my car no longer tries to swap ends when i hit the brakes. one of these will be going in the cossie sometime too.
http://www.mc2racing.com/products/xr...507/index.html |
diff
are they all the same, will those fit a sapph 2wd :?
|
Re: diff
Originally Posted by krisberic
are they all the same, will those fit a sapph 2wd :?
|
they also did an adapter for the scorpios, but i think that was just a one time deal
|
diff mount
Top bananas :banana: :banana: :top:
|
All times are GMT. The time now is 08:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands