PassionFord - Ford Focus, Escort & RS Forum Discussion

PassionFord - Ford Focus, Escort & RS Forum Discussion (https://passionford.com/forum/index.php)
-   Ford Sierra/Sapphire/RS500 Cosworth (https://passionford.com/forum/ford-sierra-sapphire-rs500-cosworth-16/)
-   -   cosworth manifolds (https://passionford.com/forum/ford-sierra-sapphire-rs500-cosworth/187501-cosworth-manifolds.html)

Thanasis 11-06-2007 12:24 PM

cosworth manifolds
 
your comments please about these manifolds!
thanks.
https://i88.photobucket.com/albums/k...DSCF0003-2.jpg
https://i88.photobucket.com/albums/k...974/b960_1.jpg
https://i88.photobucket.com/albums/k...974/babe_1.jpg
https://i88.photobucket.com/albums/k...974/bd96_1.jpg
https://i88.photobucket.com/albums/k..._manifold9.jpg
https://i88.photobucket.com/albums/k..._manifold1.jpg
https://i88.photobucket.com/albums/k...manifold11.jpg
https://i88.photobucket.com/albums/k...manifold13.jpg
https://i88.photobucket.com/albums/k...manifold15.jpg
https://i88.photobucket.com/albums/k...manifold17.jpg

rapidcossie 11-06-2007 12:28 PM

they look nice :cry:

cozmeister 11-06-2007 12:43 PM

I'm not keen, but prefer this one:

https://i88.photobucket.com/albums/k...manifold13.jpg

Ridgey 11-06-2007 03:22 PM

Not all have external wastegate..
whats the prize ?

tedscossie 12-06-2007 05:26 PM

hi
 
where did u find them???? :roll: :roll: :roll:
pm me Thanasis.
ted k

A.P.C Enterp.
Greece

Thanasis 12-06-2007 05:29 PM

Re: hi
 

Originally Posted by tedscossie
where did u find them???? :roll: :roll: :roll:
pm me Thanasis.
ted k

A.P.C Enterp.
Greece

poio apo ola?

costina 13-06-2007 12:03 PM

Theres a post on here that says the cheap ones from ebay are poo :cry:

Worth a look

U get what u pay for imo ;)

AndyPen 13-06-2007 03:09 PM

manifolds
 
I had two of the ebay ones and they didn't fit - looked good then fouled the engine mount when I tried to fit it. Sent back and they quickly sent another - same problem! I got a full refund but wasted hours on the car, not to mention bruised knuckles on those bloomin manifold nuts - as some of those couldn't be fitted either!

Heres a pic or two...

https://i147.photobucket.com/albums/.../manotfit2.jpg

https://i147.photobucket.com/albums/.../manotfit4.jpg

https://i147.photobucket.com/albums/.../manotfit3.jpg

AndyPen 13-06-2007 03:12 PM

Just found this one too - note how low the engine mount is in my first pic in the last post - it was missing the mount hole by around 15mm... but touching the manifold.

https://i147.photobucket.com/albums/...anifoldeng.jpg

Alg1k 13-06-2007 04:30 PM


Originally Posted by AndyPen
Just found this one too - note how low the engine mount is in my first pic in the last post - it was missing the mount hole by around 15mm... but touching the manifold.

https://i147.photobucket.com/albums/...anifoldeng.jpg

ENGINE MELTDOWN ANYONE :cry:

Alg1k 13-06-2007 04:32 PM

Re: manifolds
 

Originally Posted by AndyPen
I had two of the ebay ones and they didn't fit - looked good then fouled the engine mount when I tried to fit it. Sent back and they quickly sent another - same problem! I got a full refund but wasted hours on the car, not to mention bruised knuckles on those bloomin manifold nuts - as some of those couldn't be fitted either!

Heres a pic or two...

https://i147.photobucket.com/albums/.../manotfit2.jpg

https://i147.photobucket.com/albums/.../manotfit4.jpg

https://i147.photobucket.com/albums/.../manotfit3.jpg

WHY OHHHHH WHY WHEN THE ORIGINAL IS MORE THAN CAPABLE AND WONT FALL OFF OR MELT YOUR ENGINE :roll:

AndyPen 14-06-2007 10:03 PM

In my case the threads in the trousers had sheared off and this seemed to make sense... now have a gen replacement one on and glad I have :top:

https://i147.photobucket.com/albums/...willitfit1.jpg


All times are GMT. The time now is 11:04 AM.


© 2024 MH Sub I, LLC dba Internet Brands