(going N/A zetec) cvh Turbo engine parts + MFI parts
#1
Wahay!! I've lost my Virginity!!
Thread Starter
(going N/A zetec) cvh Turbo engine parts + MFI parts
Hi guys having a bit of a clear out due to a change of plans:
I am removing an entire mfi rs turbo setup from an xr3i to go N/a zetec and I also have some parts from my Rs Turbo race car (have now gone 1.9 cvh)
lots more to come but to start with:
1)Newly rebuilt NEVER RUN Std rs turbo t3 with manifold, exhaust elbow coolant inlet and outlet pipes std actuator(condition unknown) and oil feed with inline filter manifold has previously had a crack welded
£250 ---- provisionally sold/first dibs to BIL N KEL
2)Pro alloy front mount intercooler and spal fans £ (sold to Markymarkone- nice dealing with you)
3) a set of 1.6 cvh PEC rods (these have done rolling road setup probably 20 runs and 2 race meetings. we have now gone 1.9 cvh ) £150
4) set of clocks showing 45k white lockwood dials left mounting tab busted and some bulbs need changing (not tested) £25
5) 2x Bailey breather tanks neither are mint. 1st one (better one) £40, 2nd one is missing the mounting plate £20
6) polished cvh oil filler cap £15
7) MFI metering head x2 £30 each
8) Alloy flywheel surface rust on the friction surface has its ring gear £offers (would prefer not to post this as I would want the buyer to be absolutely sure of what they are getting!)
all items plus postage or you can collect from surrey (shepperton)
regards
Mike
I am removing an entire mfi rs turbo setup from an xr3i to go N/a zetec and I also have some parts from my Rs Turbo race car (have now gone 1.9 cvh)
lots more to come but to start with:
1)Newly rebuilt NEVER RUN Std rs turbo t3 with manifold, exhaust elbow coolant inlet and outlet pipes std actuator(condition unknown) and oil feed with inline filter manifold has previously had a crack welded
£250 ---- provisionally sold/first dibs to BIL N KEL
2)Pro alloy front mount intercooler and spal fans £ (sold to Markymarkone- nice dealing with you)
3) a set of 1.6 cvh PEC rods (these have done rolling road setup probably 20 runs and 2 race meetings. we have now gone 1.9 cvh ) £150
4) set of clocks showing 45k white lockwood dials left mounting tab busted and some bulbs need changing (not tested) £25
5) 2x Bailey breather tanks neither are mint. 1st one (better one) £40, 2nd one is missing the mounting plate £20
6) polished cvh oil filler cap £15
7) MFI metering head x2 £30 each
8) Alloy flywheel surface rust on the friction surface has its ring gear £offers (would prefer not to post this as I would want the buyer to be absolutely sure of what they are getting!)
all items plus postage or you can collect from surrey (shepperton)
regards
Mike
Last edited by mrbox; 26-08-2016 at 04:58 PM. Reason: updated
#3
Wahay!! I've lost my Virginity!!
Thread Starter
Hi Looking through my pictures I only have it fitted to the car with the bumper on, not much use! will try and get a pictures up in the next few days. as for horsepower I will be honest not a clue. it was fitted to the car when I got it and I doubt that engine was making more than 175bhp at the spec it was.
regards
Mike
regards
Mike
#4
Wahay!! I've lost my Virginity!!
Thread Starter
#7
Wahay!! I've lost my Virginity!!
Thread Starter
Trending Topics
#13
Wahay!! I've lost my Virginity!!
Thread Starter
hi folks sorry to those that have messaged me, back on top of things now!
pm replied to Bolton1992
omega pistons Adzn3k and will get some photo's up
batrst- which car? one was running omex (the one the rods came from)the other was a mild tuned mfi road car with a std ecu with a chip installed by power engineering.
pm replied to Bolton1992
omega pistons Adzn3k and will get some photo's up
batrst- which car? one was running omex (the one the rods came from)the other was a mild tuned mfi road car with a std ecu with a chip installed by power engineering.
Thread
Thread Starter
Forum
Replies
Last Post
Exeter J
Ford Escort RS Turbo
9
13-11-2003 08:46 PM