Fiesta RS turbo breaking
5 Attachment(s)
Did plan on getting this painted for my son but after buying it & going over it properly it's going to work out what it'd cost to buy a mint low mileage one!
Red. 1.8 Area six ZVH smoking needs rings but otherwise runs great £400. Mint Hybrid T2 looks almost new, spec unknown built by universal turbos £250. Exellent front recaros £250. Show cage £150. OFAC set up £150. 195 superchip & beige 701's £200. 4" mongoose exhaust £150. Open to sensible offers, can post most things too :top: The cars complete still so will list everything as I take it off. Few pics I have Attachment 33511 Attachment 33512 Attachment 33513 Attachment 33514 Attachment 33515 |
What wheels are on this?
Also sounds odd but do you have the bolts from the downpipe to the turbo? Thanks Dave |
Originally Posted by daveb_lives
(Post 6595144)
What wheels are on this?
Also sounds odd but do you have the bolts from the downpipe to the turbo? Thanks Dave Wheels are some after market 16's & if I'm honest are absolute pony :DD: Yes mate I'm sure I do have the bolts :top: |
In that case can I get the bolts but I'll leave the pony wheels! Lol
Dave |
Originally Posted by daveb_lives
(Post 6595156)
In that case can I get the bolts but I'll leave the pony wheels! Lol
Dave I'll check I've got them mate, PM me you're address & I'll send them to you |
How much for the bailey header tank.
|
Originally Posted by Steve Escos
(Post 6595164)
How much for the bailey header tank.
Sorry mate sold. |
How much for the cage? Also what MAP sensor is the car fitted with?
|
Originally Posted by brianscotty
(Post 6595169)
How much for the cage? Also what MAP sensor is the car fitted with?
Map sensor is an OFAC one but selling it with the ECU & loom |
Messaged you
|
Sell the ofac chip on its own?
|
has it got opening rear windows?
|
Have you got a gearbox mate?
|
Originally Posted by Stevie RS Boy
(Post 6595522)
has it got opening rear windows?
Yes it has mate £60 with all the rubbers & fixings. |
Originally Posted by Rich87
(Post 6595586)
Have you got a gearbox mate?
Yes mate but still in the car, was told it was a series 2 box but if I'm honest I've not even checked. I've driven the car though & the box was very good. |
1 Attachment(s)
Originally Posted by daveb_lives
(Post 6595156)
In that case can I get the bolts but I'll leave the pony wheels! Lol
Dave These ones mate? Attachment 33446 |
No mate, there 2 bolts that go from the downpipe upwards into the rear turbo housing, about 60mm long, think there a 14mm.
|
Is the baileys breather still available? Cheers.
|
any more info on the turbo mate? any shaft play etc?
|
Ofac set up is too cheap and chip with injectors is too much I would say mate.
|
Parts
hi do u have original steering wheel?
|
Originally Posted by lloydyLloyd
(Post 6601438)
hi do u have original steering wheel?
Sorry mate I dont |
Do you have the bonnet vents.? I could do with the metal surround cut out to weld in to my bonnet
|
Originally Posted by Caddyshack
(Post 6601447)
Do you have the bonnet vents.? I could do with the metal surround cut out to weld in to my bonnet
Bonnet is £80 mate. If you want them I'll gladly cut them out? |
Inlet manifold? Where you based?
|
interested in the 701 injectors, 195 chip and baileys breather if its still available.. cash waiting on all 3 items
|
Originally Posted by James Porter
(Post 6601455)
Bonnet is £80 mate.
If you want them I'll gladly cut them out? |
All times are GMT. The time now is 06:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands