Piper 285T2 + Vernier Pulley
21-02-2009, 06:38 PM
#1
Too many posts.. I need a life!!
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
Piper 285T2 + Vernier Pulley
How much would a Piper 285t2 cam and adjustable vernier pulley go for nowadays?
I have had a set sat in dry storage for ages, just never got round to fitting them. Now I have a new head with another lot in/on, so these are surplus to requirements.
All looks in good nick to be fair...
I have had a set sat in dry storage for ages, just never got round to fitting them. Now I have a new head with another lot in/on, so these are surplus to requirements.
All looks in good nick to be fair...
Trending Topics
22-02-2009, 07:34 AM
#9
Too many posts.. I need a life!!
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
lol, Im requesting a price, not you lot. It just happens that people may be interested in taking it from my hands for an offer, to which I have no idea what to offer it for, hence asking the question in the first place :P
22-02-2009, 11:48 AM
#15
Looks just like my Piper vernier so I would say so.
Unfortunately with out the lifters that the Cam was running with and then each one being paired with it's lobe the Cam is scrap! If you fit it and a new set of lifters the work hardened Cam will rip the new soft lifters apart in no time, sending a bucket load of swarf round your engine
Same will happen if you use your existing lifters as what wear there is will not match that on the Cam.
Cam and lifters MUST always be ran in together.
Unfortunately with out the lifters that the Cam was running with and then each one being paired with it's lobe the Cam is scrap! If you fit it and a new set of lifters the work hardened Cam will rip the new soft lifters apart in no time, sending a bucket load of swarf round your engine
Same will happen if you use your existing lifters as what wear there is will not match that on the Cam.Cam and lifters MUST always be ran in together.
Last edited by Karlos G; 22-02-2009 at 11:50 AM.
22-02-2009, 03:28 PM
#19
Too many posts.. I need a life!!
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
Maybe if i add a link to Stu's new magnetic sump plug in the listing....... lol
I bought it off ebay, others too have bought them like this on ebay.... Can't they get re-profiled or whatever its called?
I bought it off ebay, others too have bought them like this on ebay.... Can't they get re-profiled or whatever its called?
08-03-2010, 12:06 PM
#22
it could be done, but not worth the cost, reprofiling takes some of the meat off the metal on the opposing side of the cam to the lobes, thusly making the followers pump up more to take the slack, this allows the lobe to push the valves further.
Thread
Thread Starter
Forum
Replies
Last Post
jonfoc
General Car Related Discussion.
16
11-09-2018 05:35 PM
Mc5506
Ford Escort RS Turbo
6
05-10-2015 09:57 PM
