Cosnada

iTrader: (2)

Hi,
I need a V band conversion that bolts to the exhaust outlet for a Garret standard T34 (.63) turbo - this has the seal ring and 3 studs for the exhaust flange and exhaust pipe. I think Reyland used to do them.
Cheers,
Scott.

jamie956

I had one made for mine got a flange laser cut then had a V band half welded to it, I think I have the flange drawing somewhere if you want it.

Cosnada

iTrader: (2)

That would be cool. I will PM my email address ☺
Cheers,
Scott.

Brocker

iTrader: (1)

I have a V-Band adapter from my group A Turbo, if you interessted i can take photos tomorrow.

Cosnada

iTrader: (2)

Hi,
The more the merrier lol.
The stainless flange is a cracking idea but am interested in other ideas too.
Regards,
Scott.

Brocker

iTrader: (1)

Let me know if you interessted ..

Cosnada

iTrader: (2)

That's kind of what I had in my head - to use the stock flange clamp and weld a V band to it. The other solution actually replicates this except it's all stainless.
The V band I have has the male / female machining in the mating faces to promote a better seal.
Did you have yours made / adapted or did you buy it as is?
Regards,
Scott.

Brocker

iTrader: (1)

It comes with my group a Turbo if i buyed it, but i never used the Adapter

Cosnada

iTrader: (2)

Trying to match the V band surface of that adaptor won't be easy as it looks like the mating face is not flat unlike most v bands. I would definitely want to use the flanges I have as they have the sealing machine work on the mating faces.
Do you have the exhaust part of the V band that mates to the adaptor?
Regards,
Scott.

Brocker

iTrader: (1)

No only the adapter

marky_g

Well i tracked down a replacment CVH from ian at the RS Centre



Time to start ripping the old one out.....few hours on it today