PassionFord - Ford Focus, Escort & RS Forum Discussion

PassionFord - Ford Focus, Escort & RS Forum Discussion (https://passionford.com/forum/index.php)
-   Ford RS Cosworth Parts for Sale (https://passionford.com/forum/ford-rs-cosworth-parts-for-sale-34/)
-   -   Hi Spec 6 pot Calipers need these gone open to offers (https://passionford.com/forum/ford-rs-cosworth-parts-for-sale/475781-hi-spec-6-pot-calipers-need-these-gone-open-to-offers.html)

jessie_rs 23-09-2014 02:23 PM
Hi Spec 6 pot Calipers need these gone open to offers
 
Hi Spec 6 pot calipers kit 325mm grooved discs. Removed from my escort cosworth in good working order. Fully complete with brackets, braided lines etc it will need 5 new studs on one of the disc bells.

Not sure what these are worth £550 ono

http://i146.photobucket.com/albums/r...ps038fd1f4.jpg
http://i146.photobucket.com/albums/r...ps16767de1.jpg

jessie_rs 30-09-2014 06:13 PM
Offers

RSLUBBY 30-09-2014 10:54 PM
Sounds cheap to me

jessie_rs 01-10-2014 01:37 PM
Thank you very encouraging I dont know how to price them

RSLUBBY 02-10-2014 05:53 PM
Bells and rotors aren't cheap on there own and look like they have plenty of life in them probably £350 plus the calipers etc.,

motormel 04-10-2014 09:55 PM
Will these fit on sapphire 4x4's too? What minimum size wheels are needed?
Thanks

Jay, 05-10-2014 02:07 AM
they look 4x4 ones and you would need a 18 inch wheel

B13 JUS 06-10-2014 06:21 AM
I'm sure these were 315mm if they come of my mrs old escort??

jessie_rs 07-10-2014 01:00 PM
Apologises just measured the brake disc and its 325mm size.

I have looked up the brake kit it retails at £1350. The link below:
http://www.larkspeed.com/index.pl?p=HS32530R83&a=i

jason_nike 07-10-2014 05:11 PM
Very tempting.
Where you based to collect??

jessie_rs 07-10-2014 05:17 PM
Im based in warlingham, surrey junction 6 of the m25

jason_nike 08-10-2014 09:08 AM
Is there pads too??

jessie_rs 08-10-2014 10:50 AM
Yes theyre fully complete everything needed to fit. They only require 5 disc to bell bolts

marky g 09-10-2014 07:47 PM
Will these fit under 17s

jessie_rs 09-10-2014 10:45 PM
Yes disc size is fine I have 330mm AP brake kit underneath a set of 16inch wheels.

Gadget 10-10-2014 03:52 AM
Cheap!!

marky g 10-10-2014 07:19 PM
Flipping heck ive just been bin baged after a row that started about me sorting funds to buy these . Atleast its week end i can go on the raz now . Theres a plus side to bin bagging on a fri night

Matt Cooke 11-10-2014 06:40 PM
These sold?

Glenn_ 11-10-2014 06:46 PM
I would love these.

jessie_rs 11-10-2014 11:03 PM
Still available had alot of chancers and messers really.

jessie_rs 14-10-2014 04:42 PM
Offers!

jason_nike 14-10-2014 06:00 PM
Would like these too.
May have to sell my front seats for them

Harryh24 15-10-2014 07:32 PM
what would I need to fit them on a 2wd sierra?

Focosmitch 15-10-2014 08:46 PM
Cheap!

jessie_rs 15-10-2014 09:16 PM
Originally Posted by Harryh24 (Post 6528686)
what would I need to fit them on a 2wd sierra?
Im not an expert but I believe a small modification or adaptation to the bracket from 4x4 to 2wd. I hope someone corrects me if im wrong.

cossynut2 16-10-2014 08:35 AM
Originally Posted by Glenn_ (Post 6527439)
I would love these.
They are a bargain, I have got the same ones on my 2wd and they really make such a difference , get them bought Glenn !

jason_nike 17-10-2014 10:49 PM
Are the missing studs easy to get hold of??

cossynut2 18-10-2014 11:28 AM
Originally Posted by jason_nike (Post 6529294)
Are the missing studs easy to get hold of??
I would think you can get them direct from HI-Spec?

jason_nike 18-10-2014 11:53 AM
Originally Posted by cossynut2 (Post 6529389)
I would think you can get them direct from HI-Spec?
Thanks for info

Focosmitch 18-10-2014 04:18 PM
Originally Posted by cossynut2 (Post 6529389)
I would think you can get them direct from HI-Spec?
I would think you could just use some high tensile Allen head bolts mate from a motor factors as that's all they are..

RSLUBBY 19-10-2014 09:42 AM
Reyland do them think you can get them on eBay as well

jason_nike 19-10-2014 02:04 PM
Originally Posted by Focosmitch (Post 6529445)
I would think you could just use some high tensile Allen head bolts mate from a motor factors as that's all they are..
Originally Posted by RSLUBBY (Post 6529628)
Reyland do them think you can get them on eBay as well
Thanks for info guys.
They now been sold so not needed

Matt Cooke 20-10-2014 02:18 PM
Thanks for replying to my pm


All times are GMT. The time now is 03:43 PM.


© 2024 MH Sub I, LLC dba Internet Brands